Tender For Spring Based Water Supply To Village Andrahal Of Khairput Block In Malknagiri District
Tender Value
36.07 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
12 days left
EMD
36076
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malkangiri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Spring Based Water Supply To Village Andrahal Of Khairput Block In Malknagiri District
BOQ
| Sl. No. | Item Description |
| 1 | Spring Based Water Supply to village Andrahal of Khairput Block in Malknagiri District |
| 2 | Construction of Spring box: Earth work in excavation of foundation in STONEY EARTH with all lead and lift Bed |
| 3 | Providing sand filling in foundation and plinth with all cost.Bed |
| 4 | Providing cement conc.(1:3:6) using 4cm size HBG metal. |
| 5 | Providing cement conc.(1:2:4) using 12mm size CBG chips including frame work. |
| 6 | Providing dry stone masonry using 30cm and above size HG stone boulders with all cost.To protect the spring on U /S |
| 7 | Cement conc.(1:2:4) using 12mm size HBG chips including all cost. |
| 8 | 12mm tthick cement plaster (1:3) over the brick work including all cost. |
| 9 | Providing neat cement punning over the plastered surface including all cost. |
| 10 | R.C.C work in cement concrete ( 1:1.5:3 ) using 12mm size CBG chips incluidng all cost. |
| 11 | Providing uncoated steel reinforcement to RCC work including all cost. |
| 12 | Providing rough stone dry packing in approns and revetments using 15cm to 30cm size HG stone boulders including all cost. |
| 13 | Grouting approns and revetments to 23cm deep in C.C. (1:4:8) using 2.5cm size HBG metal. |
| 14 | Providing supplying fitting and fixing in position 80mm dia G.I. pipe welded with flange with all cost. |
| 15 | Providing water proofing cement paint to the exterior surface with all cost. |
| 16 | Supplying, fitting & fixing in position C.I. man hole cover of size 0.60 x 0.60 mtr. Including all cost, conveyance, taxes etc. |
| 17 | CONSTRUCTION OF 50,000 LTR CAPACITY OGR: Design, drawing, construction errection, testing and commissioning of 50000 ltr. capacity RCC Over Ground storage reservoir (Circular type with speherical Top dome) of as per detailed scope of work & technical specification with all ancillary works,connection pipe&fittings etc. and and including testing of soil etc., transportation of all materials to work site, payment of royalty, etc. all complete as per specification and direction of Engineer-in-charge. |
| 18 | Laying of rising main & distribution system: Supplying all labour, T&P for earth work excavation in trenches for pipeline in Ordinary soil including dressing and levelling the bed and depositing the soil within 50Mtr initial lead and 1.5Mtr lift etc. complete as per direction of the Engineer-in-Charge. |
| 19 | 18.1)100 mm dia G.I / M.S pipe confirming to IS: 1239 (Medium duty) |
| 20 | Laying in trenches centrifugally G.I pipes of all classes confirming to IS: 3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earth work in trenches, jointing of pipes, specials and fittings to be measured and paid separately). 80 mm dia G.I pipe confirming to IS: 1239 (Medium duty) |
| 21 | Laying in trenches centrifugally G.I pipes of all classes confirming to IS: 3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete. (Earth work in trenches, jointing of pipes, specials and fittings to be measured and paid separately). 50 mm dia G.I pipe confirming to IS: 1239 (Medium duty) |
| 22 | Supplying following nominal dia Flanges including all taxes, contractor profits etc. complete in all respect for a finished item of work as per specification. 100mm dia M.S plate Flanges confirming to IS: 6392/1971 |
| 23 | Supplying following nominal dia Flanges including all taxes, contractor profits etc. complete in all respect for a finished item of work as per specification. 80mm dia M.S plate Flanges confirming to IS: 6392/1971 |
| 24 | Supplying following nominal dia Flanges including all taxes, contractor profits etc. complete in all respect for a finished item of work as per specification. 50mm dia M.S plate Flanges confirming to IS: 6392/1971 |
| 25 | Flame cutting and facing MS plate upto 8mm thick as per specification complete. 100mm dia pipe as per flanges |
| 26 | Flame cutting and facing MS plate upto 8mm thick as per specification complete. 80mm dia pipe as per flanges |
| 27 | Flame cutting and facing MS plate upto 8mm thick as per specification complete. 50mm dia pipe as per flanges |
| 28 | Providing joints by welding with two welding beads/pass, confirming to IS: 816-1998 (Single 600 Butt Weld) to MS pipe and fitting at site by using welding generator including testing of joints, as per specification complete. 100mm diaas per flange |
| 29 | Providing joints by welding with two welding beads/pass, confirming to IS: 816-1998 (Single 600 Butt Weld) to MS pipe and fitting at site by using welding generator including testing of joints, as per specification complete. 80mm dia as per flange |
| 30 | Providing joints by welding with two welding beads/pass, confirming to IS: 816-1998 (Single 600 Butt Weld) to MS pipe and fitting at site by using welding generator including testing of joints, as per specification complete. 50mm dia as per flange |
| 31 | Providing flanged joints to pipes & fittings of the following nominal diameters including testing & jointing, cost of bolts & nuts and rubber insertions as per specification. 100mm diaFlanged Joints |
| 32 | Providing flanged joints to pipes & fittings of the following nominal diameters including testing & jointing, cost of bolts & nuts and rubber insertions as per specification. 80mm dia Flanged Joints |
| 33 | Providing flanged joints to pipes & fittings of the following nominal diameters including testing & jointing, cost of bolts & nuts and rubber insertions as per specification. 50mm dia Flanged Joints |
| 34 | Laying of HDPE pipes PE80 (PN-6) and specials of the following outer dia and Class-1 to Class-3 and jointing by fusion welding method including testing as per specification, complete as per direction by the Engineer in Charge. (Earth work in trenches to be measured and paid separately). 90 mm PN-6 HDPE Pipe Grade PE80 |
| 35 | Cost of HDPE pipe (PN-6, Grade PE80) including all taxes, carriage, inspection & testing etc all complete - 90 mm PN-6 HDPE Pipe Grade PE80 |
| 36 | Cost of Fittings & Specials etc. for HDPE Pipe (to be paid as per actuals) |
| 37 | Supplying all labour & T&P for filling of pipeline trenches with excavated materials including watering, ramming etc. complete as per direction of the Engineer in Charge. |
| 38 | Supplying all materials, labour and T.&P. etc for Public stand post all complete as per the direction of Engineer in charge and Opposite to ferrule side (after road cutting) |
| 39 | Providing & supplying all labour, materials & T&P for construction of Brick masonry Valve chamber incluidng 10cm C.C. 1:4:8 using 40mm H.G. meal, 0.08cm thick Pre cast R.C.C. Slab 1:11/2:3 using 12mm CBG chips, and 23 cm thick brick masonry Wall, plastering etc. complete in all respect with supply of materials including all taxes. |
| 40 | Supplying, fitting & fixing of 150mm dia C.I. Sluice valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 of PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 86.30 kg) |
| 41 | Supplying, fitting & fixing of 100mm dia C.I Sluice valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 of PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 56.30 kg) |
| 42 | Supplying, fitting & fixing of 50mm dia C.I Sluice valve with double flanged joints for water works purpose confirming to IS: 14846 - 2000 PN 1.6 including cost of Rubber/ Leather Packing, M.S Nut & Bolts etc. including all taxes. (Weight of sluice valves = 20.00 kg) |
| 43 | Providing & supplying all labour and materials & T&P & construction of 30cm dia x2.70m height RCC shaft Air valve pillar incluidng 10cm C.C. 1:2:4 using 12mm Chips and 30cm dia RCC pillar in M-20 Concrete using 20mm and down graded stone agregate etc. complete in all respect. |
| 44 | Supplying all labour, material and T.&P. etc C.C. 1:2:4 using 12mm size CBG chips for making good the damage for laying of difference size of pipe line all complete as per the direction of Engineer in charge. N.B: The amount put to tender is exclusive of GST. The intending bidders should offer their rate which shall be exclusive of GST as per norms. GST applicable onwards contract shall be paid over the bill amount at the time of payment of each bill. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender