Housing Urban and Rular Development Local Bodies Closing in 4 days TDR #58557577

Tender For Renovation Of Entrance Structures At Ganganagar Yojana

Issued by Local Bodies · Hathras, Uttar Pradesh
Tender Value
40.75 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
82000
Bank guarantee accepted
Document Fee
1475
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Entrance Structures At Ganganagar Yojana

BOQ

Name of Work:- Renovation of Entrance Structures at Ganganagar Yojana
Sl. No. Item Description
1Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
2Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres.
3Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
4Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
5Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
620 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
7Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
8Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
9Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
10Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
11Designing, fabricating, testing, installing and fixing in position Curtain Wall/Entrance Gate Frame with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the Entrance Gate Frame with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
12Providing, fabricating, supplying, and fixing premium quality 3D Acrylic Hindi/English Signage Letters of approved font, size, style, and colour, manufactured from laser-cut acrylic face with matching acrylic/ACP/PVC side returns of required depth to create a three-dimensional appearance. The letters shall be mounted on suitable backing/supports with all necessary stainless steel studs, spacers, brackets, anchors, adhesives, and other fixing accessories complete as required for secure installation on walls, facades, entry gates, or structures. The item shall include layout preparation, cutting, fabrication, transportation, installation, alignment, finishing, cleaning, and all incidental works complete in all respects as per approved design, drawings, and directions of the Engineer-in-Charge.
13Providing, supplying, installing, testing, and commissioning of internal LED illumination system for 3D acrylic letters, comprising energy-efficient high-brightness LED modules of approved make, suitable constant-voltage/constant-current LED drivers, wiring, connectors, power supply units, mounting accessories, and all associated electrical components required for uniform and glare-free illumination. The LEDs shall be fixed inside the fabricated acrylic letters to ensure consistent light distribution across the letter face, complete with weatherproof wiring, concealed connections, and integration with the signage structure. The item shall include all labour, materials, testing, commissioning, and making the system fully operational in all respects as per approved design and directions of the Engineer-in-Charge.
14Providing, fabricating, supplying, and fixing Authority Logo/Emblem Panels of approved size, design, colour, and finish, manufactured using high-quality acrylic sheets mounted on Aluminium Composite Panel (ACP) and/or Mild Steel (MS) backing structure as specified. The logo/emblem shall be accurately cut, shaped, and finished using CNC/laser-cut technology, complete with all required supporting framework, stiffeners, fasteners, brackets, anchors, welding, surface preparation, painting/powder coating, and fixing arrangements for secure installation at designated locations. The item shall include transportation, erection, alignment, finishing, protection against corrosion, and all incidental works complete in all respects as per approved drawings, specifications, and directions of the Engineer-in-Charge.
15Supplying Installation, Testing and Commissioning of LED RGB/RGBWW/ RGBNW/ RGBA/RGBW suitable for exterior use having IP68 rating (as per site requirement). Flexible light strip of 5 mtr standard length with 12-15 Watt per meter. Luminaire shall be capable of producing dynamic colour changing light for with 16 million colours by DMX/Ethernet based control. Minimum System lumens 450 lumens/meter and System Lumen Efficacy > 30lm/w. Luminaire light beam spread - 100-110°, The Strip should have IP 68 protection and is offered IP 68 rated connectors to join the LED Strips in continuity. The luminaire must be offered with Aluminium channel for mounting the strip lights. The product should be complete with all accessories and Driver. Lifetime of complete luminaire (LED, Driver, Electrical & control circuitry) shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) with dully R Number marked. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 24 V DC, Fixture shall be suitable to operate at an ambient temperature range of -10°C to +50°C. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79. report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate.
16Supply of 3.500 Mtr Decorative Light Pole, Exclusive 3.500 Mtr. G I profile 220 Square having designer cuts on four sides with 180 mm x 2350 mm at the middle of the Pole. Laser Cut with Milky PMMA / PC Diffuser. CCT :- 3000K \\"BKDA\\" Logo is laser cut engraved at both top & bottom end with decorative laser cut. Pole is primer coated and PU painted & in Black Colour. Service Window: flush door arrangement at the Lower Portion of the pole from 600 mm with 100 mm x 300 mm Slot from the bottam. Installation: Base Plate Dimensions :- 350 x 350 x 12 mm. Safety Class : Class 1..OEM must have its own inhouse NABL set up with I LAC accredited lab equipped with C type Photogonio meter as per IES ANSI 2019 for all for all testing approved scope for LED fixture. The bidder should submit ISO 9001 : 2015,ISO 50001 ,certificates of concerned OEM duly issued by Bureau Of Indian Standard (BIS). All the component must have the warranty for 5 years
17Supplying Installation, Testing and Commissioning of LED RGB/RGBWW/RGBNW/ RGBA/ RGBW (as per site requirement) Linear Profile / Wall Washer luminaire for Facade lighting with aluminium extruded/ Die Cast housing with inbuilt driver of following wattage as given below. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°, having the rotation degrees scale shall be provided. The luminaire shall be IP66 protection also having silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under voltage, over voltage protection, driver inbuilt surge protection of 4KV and external surge protection (SPD) of 10 KV common mode/differential mode, Driver Efficiency>85%, EMI/EMC as per CISPR-15. There should be options of beam angles of 10/20/30/40/60, asymmetric degree. Luminaire should have efficacy of minimum 40 lm/W for RGB/ RGBNW/ RGBWW/TNW and 65 lm/W for mono colour options. Luminaire shall be capable of producing dynamic colour changing light for with 16 million colours by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9. Fixture shall be suitable to operate at an ambient temperature range of - -10°C to +50°C and shall have impact resistance of IK 07. Lifetime of complete luminaire (LED ,Driver , Electrical & control circuitry) shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) with dully R Number marked and shall be complete with all necessary accessories required for proper working of fixture including connection/inter connection with weather proof ISI Marked copper conductor of minimum size 1.5sqmm connection cables and accessories , Integral male/female water proof connectors of IP68 etc. as required. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer, Rohs Compliance. 25W
18LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 200 W
19Supplying Testing & Installation of Garden Spike Light 12W WW Make Philips/ Wipro/ Twinkle etc all complete of direction of engineer in charge.
20Supply and fixing of 8 to 16 Watt LED bollard luminaire with Base Plate made of powder coated die cast aluminium and extruded AI housing with UV stabilized PC diffuser, SMD LEDs, electronic driver set, confirming to IP 65/66 and ik 07 and above protection, 600 - 800 mm height complete in all respect. 960 -1920 system lumens > 120 Lm/W, PF > 0.95, THD < 10% at full load > 300 V over voltage protection, 4 KV internal surge protection with 5 years warranty. CAT-AAA
21Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
22Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.
23Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 3 output(1output per phase) and suitable for three phase supply.
24Supplying and Laying of Aluminium Coductor PVC Insulated armoured served sheated cables 1100 V grade at a depth of 750 mm below the ground level over a cushion of 75 mm thick sand all around and protected with burned bricks on the sides and top as directed by the Engineer in Charge complete in all respects including excavation and refilling. The armouring of the cable shall be properly connected with theearth conductor by clamps etc.
25Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100 V grade on wall surface as directed by Engineer-in-Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
26Supply, Installation, Testing and Commissioning (SITC) of outdoor type floor-mounted Feeder Pillar / LT Panel Board, vermin-proof, fabricated from 2.0/1.6 mm thick CRCA sheet steel duly powder coated after seven-tank treatment process, mounted on M.S. channel base with bottom cover complete. The panel shall be provided with electrical grade high conductivity aluminium bus bars of suitable rating supported on non-hygroscopic SMC/DMC bus bar supports and designed to withstand short circuit levels of 36 kA for MCCB incomers.The panel shall be of fully compartmentalized and segregated construction as per Form-3B, conforming to IS 8623 Part-II & III, complete with separate metering compartment, digital multifunction meter, CTs, indicating lamps, control MCBs, terminal blocks, copper control wiring, and all associated accessories. The panel shall be suitable for outdoor operation and complete in all respects including internal wiring, testing, commissioning, earthing terminals, hardware and foundation fixing arrangements.Incoming: 100A TPN MCCB - 1 No. Outgoing: 63A TPN MCCB - 2 Nos. Category-B Cubicle Type Panel.
27Providing and stacking of ( date palm/khajur) height 270-300 cm. as per direction of theofficer-in-charge.
28Providing and stacking of Putranjiva roxburghii (dense) of ht. 45-60 cm in bag of size 15 cm as per direction of the officer-in-charge
29Providing and stacking of Plumeria alba dwarf height 90-105 cm. with 3 4 branches and thick stem in big size HDPE bag as per direction of the officer-in-charge.
30Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer-in-charge.
31Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
32Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid separately)
33Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep
34Providing, stacking and Displaying Tecoma Dwarf well developed fresh & healthy foliage 25 cm to 40 cm ht. bushy plant at blooming stage in 20 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge
35Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 45 cm dia, and 45 cm deep
36Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
37Supplying and stacking of sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment)
38Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20 mm
39Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: — All kinds of soil
40Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : — 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
41Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
42Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
43Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58557577
AUTHORITY Local Bodies
TENDER VALUE 40.75 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Bulandshahr Development Authority
Work Description Tender for Renovation Of Entrance Structures At Ganganagar Yojana
Basic Detail
Tender No 3275/BKDA/2026-27 Dt.13-11-2026 TB
Bidding Type Tender
Location
City Hathras
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 40.75 Lakhs
Tender Fee 1475
EMD 82000
Exemption Not Available
Document List
293940f4-eee9-4a5c-91bd-89be70d98ba5.html
BOQ_2295713.xls
TD_3275_TB.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

293940f4-eee9-4a5c-91bd-89be70d98ba5.html

xls

BOQ_2295713.xls

pdf

TD_3275_TB.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender