Tender For Remaining Work Of New Medical College, Residence Hostels Etc. At Sawai Madhopur, Rajasthan (Excluding Cost Of Cement And Including Cost Of Internal Electrical Work) (Risk & Cost)
Tender Value
35.62 Crore
Estimated cost
Bid Submission
07 Dec 2026
18 days left
EMD
71.24 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sawai Madhopur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remaining Work Of New Medical College, Residence Hostels Etc. At Sawai Madhopur, Rajasthan (Excluding Cost Of Cement And Including Cost Of Internal Electrical Work) (Risk & Cost)
BOQ
| Sl. No. | Item Description |
| 1 | PART A (CIVIL Works) |
| 2 | EARTH WORK |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m, disposed earth to be levelled and neatly dressed: All kinds of soil |
| 4 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed: |
| 5 | Oridinary Rock |
| 6 | Hard Rock (Blasting Prohibited) useful material 30 % |
| 7 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils. |
| 8 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sum on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available. |
| 9 | Oridinary Rock |
| 10 | Hard Rock (Blasting Prohibited) useful material 30 % |
| 11 | Add extra for foundation/trenches/drains for every additional lift of 1.5 Mtr. orpart thereof in |
| 12 | In all kind of soils. |
| 13 | In Ordinary rock and hard rock. |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. |
| 15 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand |
| 16 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20% |
| 17 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRECONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) |
| 18 | Carriage of material by mechanical transport includeing, loading, unloading andstacking |
| 19 | Up to 0.5 Km beyond 50 mtr lead |
| 20 | 0.5 KM to 1.0 KM |
| 21 | 1 Km to 5 Km (Rate per KM) |
| 22 | Add for each 1Km beyond 5Km (upto 10km) |
| 23 | Add for each 1Km beyond 10Km (upto 20Km) |
| 24 | Construction of Embankment with Material obtained from Borrowpits |
| 25 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 26 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 27 | CONCRETE WORK |
| 28 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 29 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominalsize). |
| 30 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. |
| 31 | M15 grade Nominal Mix. 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). |
| 32 | Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as perspecification . |
| 33 | 50 mm thick. |
| 34 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 35 | REINFORCED CEMENT CONCRETE |
| 36 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 37 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for uptofloor five level |
| 38 | Walls (any thickness) including attached pilasters, buttresses plinth and stringcourse. |
| 39 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor locks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 40 | Columns, pillars, posts and struts etc. |
| 41 | Grid roofing with panel area more than 2.5 Sqm. (contact area to bemeasured). |
| 42 | Add extra for shuttering in circular work (in respective centering and shutteringitems)- Column |
| 43 | Add extra for centering and shuttering work in superstructure above floor five level for each four floor or part thereof . |
| 44 | Add extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured) |
| 45 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. |
| 46 | Thermo-mechanically Treated bars (Conforming relevent IS code) |
| 47 | Add extra for reinforcement in superstructure above floor five level for eachfour floor or part thereof . |
| 48 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. qty cement 400 kg/cum |
| 49 | M20 grade Nominal Mix / Design Mix |
| 50 | Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge . All works upto floor V floorM20 grade Design Mix by using min 400 Kg of cement per cum of concrete |
| 51 | Providing M-25 grade concrete by using min 410 kg of cement per cum insteadof M-20 grade design mix. |
| 52 | Providing M-30 grade concrete by using min 420 kg of cement per cum insteadof M-20 grade design mix. |
| 53 | Add extra for RCC work in superstructure above floor five level for each fourfloor or part thereof . |
| 54 | Providing and fixing 150 mm wide sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment.Aluminum fluted strips 2 mm thick |
| 55 | Providing and fixing Expansion Joint Board for building RCC column beams, walls, slab of polyethylene foam of density 30 to 35 kg/m3 of Armour Board. |
| 56 | Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes raking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. |
| 57 | To joints in flooring, as per drawing with first layer of poly sulphide sealant in size 20 mm width and 10 mm depth over PE Foam and then providing polyethylene foam back up rod 25 mm dia size and finally providing another layer of poly sulphide sealant in size 20 mm width and 10 mm depth over P.E. back up rod as per application procedure and direction of Engineer-in-charge. |
| 58 | BRICK WORK |
| 59 | Brick masonry with F.P.S. bricks of class designation 75 in foundation andplinth with bricks |
| 60 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 61 | Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. |
| 62 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 63 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : |
| 64 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 65 | Add extra for brick work in superstructure above floor five level, for each fourfloors or part thereof. |
| 66 | Quantity in Cum. |
| 67 | Quantity in Sqm. |
| 68 | Providing & Laying autoclave aerated blocks masonry with 150mm/230mm/300mm thick AAC Blocks of Grade-I Conforming to IS:2185 Part:III in superstructure above plinth level with polymer modified adhesive mortar as per direction of Engineer in Charge. |
| 69 | Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor V level in. |
| 70 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 71 | Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at everythird course of half brick masonry |
| 72 | MARBLE WORK / STONE WORK |
| 73 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. 15-18 mm thick laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. |
| 74 | Green/Black/Other granite |
| 75 | Upto 1500 Cm2 |
| 76 | 1501 to 3600 Cm2 |
| 77 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skiriting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. |
| 78 | Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. |
| 79 | Providing and fixing 75 mm wide Decorative Border in different shades and in all coloures in glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. |
| 80 | Providing and laying Ceramic MAT floor tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown of any size, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mixed with pigment of matching shade complete. |
| 81 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 82 | Granite work |
| 83 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete |
| 84 | Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 20 to 30 mm thick Pink Sand stone (Bansi Paharpur) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paidseparately) |
| 85 | Exposed face Machine cut |
| 86 | WOOD WORK & PVC WORK |
| 87 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : |
| 88 | Decorative Teak veener both side |
| 89 | 35 mm thick shutter |
| 90 | Commercial Veneer both side |
| 91 | 35 mm thick shutter |
| 92 | Add extra for Flush doors |
| 93 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. |
| 94 | Extra for providing vision panel not exceeding 0.1 Sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : |
| 95 | Extra if louvers (not exceeding 0.2 sum) are provided in flush door shutters (overall area of door shutters to be measured). . |
| 96 | Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). |
| 97 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : |
| 98 | Kota stone 25 to 30mm thick. |
| 99 | Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using : |
| 100 | 12mm thick Acoustical Board |
| 101 | Providing and fixing 50 mm thick resin bounded glass whool 32 kg/cum density wrapped in julities cloth bag (box type) and held in position using chicken mesh |
| 102 | Providing and fixing Hassian cloth of approved colour and texture over soft wood frame glass wool & fibre glass tissuse paper |
| 103 | Providing and fixing expandable fastners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/R.C.C. and making good etc. complete |
| 104 | 50 mm long |
| 105 | STEEL WORK |
| 106 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. |
| 107 | Electric resistance or induction butt welded tubes |
| 108 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 109 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a Providing and fixing pressed steel door frames onfirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : |
| 110 | Profile E |
| 111 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. |
| 112 | Extra for providing D type pipe head as top of hand railing |
| 113 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 114 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). |
| 115 | Suppling and fixing of rolling shutters of approved make, made of 80x1.25mm ms laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangments for in side and out side locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3 cm long wire spring grade No 2 and ms top cover 1.25 mm thick for rolling shutters as per design (Clear openable area to be measured for payment.). |
| 116 | Providing and fixing boll bearing for rolling shutters |
| 117 | Extra for providing mechanical device chain and crank operation for operatingrolling shutters. |
| 118 | Exceeding 10.0 Sqm and upto 16.80 Sqm in the aera |
| 119 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge |
| 120 | Window fixed. |
| 121 | Window openable. |
| 122 | Extra for additional shutter in pipe section windows with wire gauge 14 mesh x24 gauge |
| 123 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding |
| 124 | Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge |
| 125 | ROOFING |
| 126 | Making khurras 450 x 450mm with average minimum thickness 50 mm cement concrete 1:2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40 micron finished with 12 mm cement plaster 1:3 and one coat of neat cement, rounding edges and making and finishing the out let complete. |
| 127 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 128 | Providing & fixing calcium silicate ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mmcenter to center along main |
| 129 | 8 mm thick |
| 130 | Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm |
| 131 | diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. |
| 132 | Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineerin-Charge. |
| 133 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. |
| 134 | 5.0 mm thick (Wt.8.4 Kg./Mtr.Sq.) |
| 135 | Extra for corrugated Fiberglass Reinforced Plastic (FRP) (2.5\\" /4.2\\"/6\\") or step down (2.5\\" /4.2\\"/6\\") as specified |
| 136 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations.(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with proprietary water proofing compound conforming to IS. 2645 over the RCC slab including cleaning the surface before treatment.(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:4 (1 cement :4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300x300xmm square |
| 137 | (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge.With average thickness of 120mm and minimum thickness at khurra as 65 mm. |
| 138 | FLOORING |
| 139 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. |
| 140 | 40 mm thick with 20 mm thick nominal size aggregate. |
| 141 | Cement plaster in skirting and/dado 18 mm thick with cement mortar 1:3 (1 cement : 3 course sand) finished with a floating coat of neat cement including rounding of junctions with floor |
| 142 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. |
| 143 | 40 mm wide and 4 mm thick. |
| 144 | Providing & laying Chequerred terrazzo tiles of approved make 22 mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28 mm thick bed of C.M. 1:4 |
| 145 | Medium shade pigment using approximately 50% white cement and 50% ordinary cement. |
| 146 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 147 | For area of each slab up to 2001 to 5000 Sq. Cm : |
| 148 | Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete |
| 149 | For area of each slab upto 2001 Sqcm |
| 150 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete, Size 600 mm X 600 mm |
| 151 | Providing and fixing Marble stone flooring table rubbed, 15 -18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. |
| 152 | Rajnagar 1st quality/Ageria with light spots. |
| 153 | Up to 1500 Cm2 Tiles |
| 154 | Bhaislana,Abu,Kishangarh Zebra (Black Marble) |
| 155 | up to 1500 Cm2 Tiles |
| 156 | Crazy marble stone flooring 20 mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4:7 (4-Cement:7-White black or white or black marble chips) size from 1 mm to 4 mm by volume and under layer of 25 mm thick cement concrete [1:2:4, graded stone aggregate 12.5 mm nominal size] rubbing and polishing and cement slurry etc. complete : In ordinary cement. |
| 157 | Random rubble dry stone Kharanja under floor. |
| 158 | FINISHING |
| 159 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete |
| 160 | Plaster on new surface on walls in cement sand mortar 1:4 including raking ofjoints etc. complete fine finish: |
| 161 | 20 mm thick. |
| 162 | Plaster on new surface on walls in cement sand mortar 1:6 including racking ofjoint etc. complete fine finished: |
| 163 | 12 mm thick. |
| 164 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 165 | Finishing with neat cement (Punning). |
| 166 | Making grooves as per design in plaster 10mm to 20mm wide. |
| 167 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) |
| 168 | Extra for making Ornamental design like Kangooras Gola etc. as per Jaipur practice in cement plaster (12 mm Thk) |
| 169 | Extra for making Ornamental design like Kangooras Gola etc. as per Jaipur practice in cement plaster (20 mm Thk) |
| 170 | 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4fine sand) : |
| 171 | Flush band. |
| 172 | Sunk band. |
| 173 | Moulded band. |
| 174 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: |
| 175 | New work (two or more coats) over and including scrapping and priming coatwith cement primer. |
| 176 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: |
| 177 | Two or more coats on new work including preparation of base with primer,putty, lippy etc complete in all respect. |
| 178 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : |
| 179 | Two or more coats on new work |
| 180 | French sprit polishing :Two or more coats on new work including a coat ofwood filler. |
| 181 | Finishing walls with Acrylic Smooth exterior paint of required shade including allscaffolding. |
| 182 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 183 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat |
| 184 | Trowel Finish av. thickness 1000 to 1200 microns. |
| 185 | Plaster on new surface on wall in cement sand mortar 1:3 including raking ofjoints etc. complete fine finish : |
| 186 | 12 mm thick. |
| 187 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 188 | Providing and Fixing Chiken wire mesh at the joint of masonry members/R.C.C. Members with Nails complete in all respect. |
| 189 | DISMANTLING AND DEMOLISHING WORK |
| 190 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 191 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 192 | In Cement mortar. |
| 193 | Dismantling brick tiles covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 194 | Demolishing mud phuska/ Lime dhar/ Kharanja in terracing and disposal of unserviceable material within 50 meters lead. |
| 195 | WATER PROOFING |
| 196 | Providing & applying one coat of UV resistant polymer cement based waterproofing slurry coating of approved make and quality on concrete or plastered surface as per specifications including preparation of surface by cleaning brushing and dust removing, filling of cracks and making the surface leak proof by mixing one part of chemical with 2 parts of cement and 2 parts of water (covering area 1.86 Sq.M/Kg of chemical) including cost of cement, labour, tools & plant, scaffolding if necessary etc., complete as directed by Engineer in Charge. Note: Undulations/cracks found on the surface should be rectified with Cement Motor before application and the same will be paid under relavent items. |
| 197 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours.The rates includes preparation of surface treatment & sealing of all joints,corners, junction with polymer mixed slurry. |
| 198 | ALLUMINIUM & PVC WORKS |
| 199 | Providing and fixing aluminum work for doors, windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). |
| 200 | For fixed portion |
| 201 | Polyester Powder coating aluminum (minimum thickness of powder coating 50micron) |
| 202 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). |
| 203 | Polyester Powder coating aluminum (minimum thickness of powder coating 50 micron) |
| 204 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) |
| 205 | With float glass panes of 5.0 mm thickness ( weight not less than 13.50kg/sqm) |
| 206 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. |
| 207 | With stainless steel cover plate |
| 208 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. |
| 209 | Polyester Powder coating aluminum ( minimum thickness of powder coating 50micron) |
| 210 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 211 | Providing and fixing friction stay for aluminium windows, Ebco or equivalent, complete in all respect size 10\\". |
| 212 | S & f fixed wire gauge of stainless steel of 14meshx24gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws at not exceeding 150 mm distance at all heights with all lead and lift with scafolding. |
| 213 | Aluminium structural glazing work -providing and fixing of speclally designed high performance semlunltlzed system using aluminium section of Jindal / Hindalco / Mahaveer make for main mullion, corner mulliom, main transom and top & bottom transom for main frame based structural glazing. Mullion & Transom-shall be out of aluminium section size of 63.5 x 58 x weight 1.350 kg / m.Anodizing - The surface of aluminium section shall be finished with 15 micron anodizing in required shade. Silicon - D / C 995 / SSG 4000 structural sealent. Weather Silicon - 789 / uitra proof. Singie shutter section for glass panel - 19.0 x 19.0 x 0.250 kg / m.M.S clamp - size - 75x75x6 with 10 mm hilti fastners fixing for mullions. Glass 6 mm thick pyrolatic solar control coated heat reflective and tougnened glass of saint Gobain make of approved shade (glasses to be fixed using spacer tape and sealing the glasses joints with 789 Dow coming weather proofing silicon) The whole system after installation shall be completely water proof / weather resistant sealed against air and water complete as per drawings, requirements , specifications and as directed by Enginees. |
| 214 | ROAD WORK |
| 215 | Chapter 3-EARTHWORK, EROSION CONTROL AND DRAINAGE |
| 216 | Construction of Subgrade and Earthen Shoulders |
| 217 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2 |
| 218 | Chapter 4 - GRANULAR SUB-BASES, BASES (NON-BITUMINOUS) ANDSHOULDERS |
| 219 | Granular Sub-base with Well Graded Material (Table 400.1) |
| 220 | By Mix in Place Method |
| 221 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 222 | For Grading I Material |
| 223 | Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.) |
| 224 | 1. Though vibratory roller is required only for 3 hours as per norms, the same is required to be available at site for 6 hours to match with other machines. The usage rates of vibratory roller may be multiplied with a factor of 0.65 |
| 225 | 2. As three wheeled smooth steel rollers are commonly in use, the same has been provided as an alternative which can be used if the thickness of individual layer does not exceed 100 mm.. |
| 226 | Chapter 5 - BASES AND SURFACE COURSES (BITUMINOUS) |
| 227 | Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.) |
| 228 | Bitumen primer has been provided @ 0.60 kg per sqm as per clause 502.8. Payment shall be made with adjustment, plus or minus, for the variation between this quantity and the actual quantity approved by the Engineer after the preliminary trials referred to in clause No. 502.4.3. |
| 229 | Tack Coat |
| 230 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 231 | 1. Bitumen emulsion has been provided @ 0.20 kg per sqm as per clause503.8. Payment shall be made with adjustment, plus or minus, for the variation between this quantity and actual quantity approved by the Engineer after preliminary trials referred to in clause No. 503.4.3 |
| 232 | Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.) |
| 233 | for Grading II(19 mm nominal size) |
| 234 | Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects) |
| 235 | for Grading-II(13mm nominal size) using binder VG-30 |
| 236 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge). |
| 237 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for pavingspecification and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) |
| 238 | M-35,60mm thick to be used in light traffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20 years (A standard axle is defined as a single axle load of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car parks, office driveways , housing colonies, office complexes, rural roads with low volume traffic, farm houses , beach sites, tourist resorts, local authority footways, residential roads, etc. |
| 239 | Category „B‟ Denated only two side like I,Z,T shape etc. as per IRC SP63:2004 |
| 240 | M-40,80mm thick to be used in medium- traffic ( Medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc |
| 241 | Category „C‟not denated on any it‟s faces like Hexagon, Rectangular, squareshape as per IRC SP 63:2004 |
| 242 | Add extra over rates of item No. 11.38, A to C if colored paver blocks are used |
| 243 | Category „B‟ Denated only two side like I,Z,T shape etc. as per IRC SP63:2004 |
| 244 | Category „C‟not denated on any it‟s faces like Hexagon, Rectangular, squareshape as per IRC SP 63:2004 |
| 245 | HORTICUL TURE WORKS |
| 246 | CHAPTER H-1 SUPPLY OF MANURE, INSECTICIDES, PLANTS, POTS, T &P ETC. |
| 247 | Supply of dry manure including loading unloading,transportation & stacking atsite. |
| 248 | Farm yard manure(organic) |
| 249 | Supply & stacking good earth at site complete including loading unloading &transportation etc |
| 250 | Good soil of earth |
| 251 | CHAPTER H-2 MAINTENANCE OF GRADENS |
| 252 | Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn for 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost |
| 253 | in rows 7.5 cm apart in either direction |
| 254 | CHAPTER H-5 DETAIL OF PLANTATIONS AND MAINTENANCE OF PLANTS ON ROAD SIDE FOR FIVE YEARS |
| 255 | Supply & Planting of shady plants ( Neem. Peepal, Goolar, Jamun, Imli or other specified) along road side including the following activities:- |
| 256 | Preparation of soil including cleaning & removing of unwanted shrubs removalof stones & garbage. |
| 257 | Supply of plant at site of two years of age & height more than 1.50 Mtr. |
| 258 | Supply of dry manure(Farm yard manure organic) |
| 259 | Supply of Insecticides. |
| 260 | Digging of pits size 60x60x60 cms. Including removal of stones. Manuring application of insecticides & watering at least 1.5 Liter per plant after planting |
| 261 | Watering to plants |
| 262 | Maintance of plants by the contractor including pits, preparation of Thavala Hoeing weeding etc & application of insecticiedes etc. & security. If the plant die during maintence contractor has to rplace same heingh plant at his own cost. |
| 263 | Supply & Panting of ornamental plants ( Kachnar, Amaltas, Gulmohar, Arjun, Kala, Siris, Jacranda etc. or other specified) along road side including the following activities :- |
| 264 | 1. Preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage |
| 265 | Supply of plant at site of two years of age & height more than 1.50 Mtr. |
| 266 | Supply of dry manure( Farm yard manure organic) |
| 267 | Supply of Insecticides |
| 268 | Digging of pits size 60x60x60 cms. Including removal of stones. Manuring application of insecticides & watering at least 1.5 liter per plant after planting. |
| 269 | Waterring to Plants. |
| 270 | Maintenance of plants by the contractor including pits. Preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintencance contractor has to replace same height plant at his own cost. |
| 271 | Planting & Maintenance of shrubs. |
| 272 | Planting of shrubs in central verge |
| 273 | Preparation of soil including cleaning & removing of unwanted shrubs removalof stones & garbage. |
| 274 | Supply of plant at site like Bouganvillia & Kaner. |
| 275 | Supply of dry manure( Farm yard manure organic) |
| 276 | Supply of Insecticides |
| 277 | Digging of pits size 60x60x60 cms. Including removal of stones. Manuring application of insecticides & watering at least 1.5 liter per plant after planting. |
| 278 | Waterring to Plants. |
| 279 | Maintenance of plants by the contractor including pits. Preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintencance contractor has to replace same height plant at his own cost. |
| 280 | NON SHEDULE ITEMS |
| 281 | 3 seater fix seating arrangements this unit has to be mounted in a lecture theatre of step ladder type with each ladder of approx 1080mm. The units have to allgned at side by side with passage in between or as per layout approved by engineer in charge/client. 3 seater disk size top 1800W x 375 to 400D x 750h, Intermediate partition for storage : 1800W x 200D. The desk top shall be made with 25mm thick ply with matching colour on all edge. There shall be MS perforated modesty panels of 1.2mm thick. Understructure consists of MS oval tube 70x30x2mm, rectangular pipe 75x30x2.5mm, 25x10x1.6mm, epoxy powder coated of 40-50 microns. All tube ends to be provided with high denisty caps. All corners to have 10mm radius. 3 seater seat size 1800W x 350D x 450h. seat shall be 18mm thick matching colour on all edges and seat fixed to understructure with pop-up rivets. Understructure consits of MS oval tube 70x30x2mm, rectangular pipe 75x10x2.5mm, 25x10x1.6mm thk, 25x25x2mm, 55x35x2mm with base plate of 2mm thick sheet grouted on floor, epoxy powder coated of 40-50 microns. All tube ends to be provided with high density. |
| 282 | PART ;B; : PHE WORK (SANITARY FIXTURES) |
| 283 | P & E Indian type white glazed vitreous .china 1st quality W:C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : |
| 284 | size 580x440 mm |
| 285 | P & F European type white glazed vitreouschina 1st quality Double symphonic W.C. (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. |
| 286 | P & F WVC Wash basin (1st quality' IS:2556Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.l. waste pipe complete including cutting & making good the wall: |
| 287 | size 550x400 mm |
| 288 | under Counter oval shape wash basin size 600x390mm approx. (centre tap hole) |
| 289 | P&F W.V.C. Urinal Partition plate of approved standard make of size 630x315 mm including making good the wall. |
| 290 | P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. |
| 291 | Makrana `Adanga` or Raj Nagar 1St Quality White or Andhi Indo-Italian marble. |
| 292 | P&F I quality WVC Urinal (IS :2556 mark) with 25 mm dia G.I. waste pipe, dome douplings',; concealed iron “ brackets or screws etc. complete. |
| 293 | Flat Back(Large) or half stall size 610 x 400 x80 mm |
| 294 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor : |
| 295 | White vitreous china(WVC) lab sink: 530 x 430x 180 mm |
| 296 | White vitreous china laboratry(WVC) sink: 450x300x150 mm |
| 297 | Providing and fixing 1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell ) with large waste coupling. |
| 298 | Kitchen sink with drain board |
| 299 | Overall size -45 x 20x8(inches) Bowl size- 20x16x8(inches) |
| 300 | Kitchen sink without drain board |
| 301 | Overall size -24 x 18 x8(inches) Bowl size- 20x16x8(inches) |
| 302 | P & F Chromium plated Swan-neck Laboratory Cock of approved quality / make: |
| 303 | One Way. |
| 304 | Two Way. |
| 305 | Providing & Fixing waste pipe with all fitting |
| 306 | PVC with C.P. Nut 32mm |
| 307 | PVC with C.P. Nut 40mm dia |
| 308 | P & F Looking Mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) |
| 309 | Oval shape 450x350 mm |
| 310 | Providing and fixing Bottle Trap of of approved make |
| 311 | C.P. Brass 32 mm |
| 312 | C.P. Brass 40 mm |
| 313 | Providing and fixing liquid soap container with brackets complete of approved make: |
| 314 | C.P. brass l |
| 315 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : |
| 316 | C.P. Brass bib cock, 15 mm nominal bore. |
| 317 | (-do-) Long body, 15mm nominal bore weight not less than 690 gm |
| 318 | P & F Sink Cocks of superior quality &. approved made: |
| 319 | C.P. Sink cock swinging spout 15 mm. |
| 320 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Geyser etc. |
| 321 | C.P. Inlet connection 15 mm Brass (1S:8931 marked). |
| 322 | Providing and fixing Toilet paper holder with rod of approved quality/make |
| 323 | C.P. brass heavy & superior quality |
| 324 | P&F Shower arm 15mm dia of approved quality/ make. |
| 325 | C.P brass heavy & superior quality 150mm projection |
| 326 | P&F Towel rail or ring of approved quality /make: ' |
| 327 | C.P. brass towel rail with bracket 600mm x 20mm |
| 328 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : |
| 329 | PVC with PVC bend as per IS : 7231 |
| 330 | P & F C.P. brass Urinal Flush pipe set complete with flanged brackets of. Approved make. |
| 331 | For I Urinals. |
| 332 | Providing and fixing bath Shower of approved quality/make. |
| 333 | 150mm dia. |
| 334 | P & F Extension pipe for bib cocks of approved quality /make: |
| 335 | C.P Brass heavy & superior quality 150 x 15mm |
| 336 | P&F Jet spray for water closet with C.P. copper tube flange of approved make |
| 337 | P&F Soap dish or tray of approved quality/ make. |
| 338 | C.P. brass |
| 339 | P & F Toilet Shelf of approved quality/make: |
| 340 | Acrylic shelf on C.P. brass casted brackets & guard rail of commander or equivalent make size 550 X 125 mm |
| 341 | Providing and fixing Superior quality CP Brass fittings o fapproved make as per direction of Engineer-in-charge. |
| 342 | Double coat hook |
| 343 | P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-inCharge |
| 344 | P & F water closet Seat Covers with brass hinges complete : |
| 345 | Solid PVC (ISI marked) grade-I White for EWC. |
| 346 | P & F Mixing Range (15 mm)of superior quality and approved make. |
| 347 | C.P. One hole/close hole basin mixer with casted spout. |
| 348 | P & F Stop Cock (IS: 8931 Mark), superior quality& of approved make |
| 349 | Brass 400 gm. 15 mm nominal bore |
| 350 | C.P. brass Concealed Stop Cock 15 mm |
| 351 | Supply and Installation of Grab Bar S, type-304, 18-gauge (1 mm) stainless steel tubing with satin-finish. 1-1/2\\" (25.4mm) outside diameter. Concealed Mounting Flanges — 18-8 S, type-304, stainless steel plate; end flanges with two holes for attachment to wall. Snap Flange Covers — 18-8 S, type-304, 22- gauge (0.8mm) drawn stainless steel with satin-finish. Each cover snaps over mounting flange to conceal mounting screws. |
| 352 | Supply and Installation of Swing Grab Bar 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside diameter. Ends are heliarc welded to flanges.Backplate - 18-8 S, type-304, 3/16\\" (5mm) thick, satin-finish stainless steel with four screw holes for attachment to wall. |
| 353 | SOIL, WASTE,VENT AND RAIN WATER PIPES |
| 354 | Providing and fixing Spun-Cast Iron floor trap (Nahani) of (IS:3989 Mark) approved/ quality make with socket down or hinged grating including cutting and making good the floor : |
| 355 | Size 100X100 mm |
| 356 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality/make including joining the pipe with solvent cement rubber ring and lubricant |
| 357 | 110mm dia |
| 358 | 160mm dia |
| 359 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 360 | 110mm dia |
| 361 | Coupler(socket) |
| 362 | Door Tee |
| 363 | Bend 45 |
| 364 | Door Bend (top side) |
| 365 | Vent Cowel |
| 366 | Pipe clip |
| 367 | WC connector with lipring |
| 368 | WC connector bent type |
| 369 | Multi Floor Trap |
| 370 | Height raised |
| 371 | Top tile & straine |
| 372 | P-Trap |
| 373 | Gully Trap |
| 374 | Providing and fixing Grating of approved quality/make: |
| 375 | Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make |
| 376 | Painting (two or more coats) on rain water soil, waste and vent pipes and fitting with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work: |
| 377 | 100 mm dia. pipes. |
| 378 | 150 mm dia. pipes. |
| 379 | Providing and fixing floor clean out plug consist of CI bend & GI socket heavy class with Brass cap & key for opening male threaded cap etc. including lead caulked to CI pipescomplete in all respects as per drawing/ sample approved by Engineer -in -ChargeFCO (floor clean out plug shall be flushed with floor finish |
| 380 | 100 mm dia/150/200 mm dia |
| 381 | Providing and fixing WC connector socket(for vitreous china & CI pipe) of EDPM good quality with polypropelene body 100x150/100x250 of approved quality and make complete in all respect. |
| 382 | Providing and laying Laboratory / hospital Effluent waste pipe and fitting of high density polyethelene (HDPE),CLASS -PE 80 ,pressure rating PN- 6,conforming to IS :4427, electric fusion joints/flanged joints , fittings which includes bends,,junctions,cowls,offsets,access pieces.etc. complete including jointing. |
| 383 | 50 mm dia |
| 384 | 90 mm dia |
| 385 | 110 mm dia |
| 386 | Add extra for Lead caulked joints (IS:782-1978) in sand cast iron pipes/spun. |
| 387 | 100mm dia 0.98Kg pig lead |
| 388 | 150mm dia 1.48Kg pig lead |
| 389 | Providing Drip seal joint of approved make for the sand cast iron/centrifugaly cast iron pipes where the workability of lead joint can be effected due to space constraints. |
| 390 | 100 mm |
| 391 | 150 mm |
| 392 | WATER SUPPLY (Internal & External) |
| 393 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL |
| 394 | Internal work – Exposed on wall for Domestic- other than flushing |
| 395 | 15 mm nominal outer dia Pipes |
| 396 | 20 mm nominal outer dia Pipes |
| 397 | 25 mm nominal outer dia Pipes |
| 398 | 32 mm nominal outer dia Pipes |
| 399 | 40 mm nominal outer dia Pipes |
| 400 | 50 mm nominal outer dia Pipes |
| 401 | 62.5 mm nominal inner dia Pipes |
| 402 | Providing and fixing Chlorinated Polyvenyl Chloride(CPVC)pipes having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings i/c fixing the pipe with clamps at 1.0 m spacing.This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints ciompleteas per direction of Engineer in charge. |
| 403 | Concealed work including cutting chases and making good the walls etc. For domestic-Other than flushing |
| 404 | 15 mm nominal outer dia pipes |
| 405 | 20 mm nominal outer dia pipes |
| 406 | 25 mm nominal outer dia pipes |
| 407 | 32 mm nominal outer dia pipes |
| 408 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 409 | External Work |
| 410 | 32 mm nominal outer dia pipes |
| 411 | 40 mm nominal outer dia pipes |
| 412 | 50 mm nominal outer dia Pipes |
| 413 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : |
| 414 | 25mm dia, nominal bore |
| 415 | 32 mm dia, nominal bore |
| 416 | 40 mm dia, nominal bore |
| 417 | 50 mm dia, nominal bore |
| 418 | P & F Gun-metal Non-return Valve or Check valve (IS:Make) of approved make, superior quality : |
| 419 | 25 mm nominal bore. |
| 420 | Horizontal : |
| 421 | 40 mm nominal bore. |
| 422 | Horizontal : |
| 423 | 50 nominal bore (vertical) |
| 424 | 50 nominal bore (Horizontal) |
| 425 | 80 mm nominal bore |
| 426 | Horizontal |
| 427 | P & F PVC Storage Tank (IS: 12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long. G.I. over-flow pipe & 25 Cm: long wash out pipe with :' plug''; & socket, including making connection etc. complete of approved design. |
| 428 | 500 litres capacity. |
| 429 | 1000 litres capacity. |
| 430 | 5000 litres capacity. |
| 431 | P & F Water meter IS:779 mark) of approved make: |
| 432 | 25 mm dia. |
| 433 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : |
| 434 | Brass wt. 1000 gm, 25 mm |
| 435 | (-do-) wt.Not less than 800 gm, 32mm |
| 436 | Brass wt. not less than 1200 gm, 40 mm. |
| 437 | Brass wt.n not less than 2000 gm, 50 mm. |
| 438 | Making connection of G.I. distribution branch with G.I. main including all fitting. |
| 439 | Beyond 25 mm & up to 100 mm dia. |
| 440 | P & F 15 mm. Dia Connection pipe of approved quality/make: |
| 441 | PVC pipe with C.P. Brass nuts up to length 450 mm. |
| 442 | Providing and fixing C.I.mouth, brass ferrule 25 mm dia |
| 443 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 444 | Inside size 300x300mm depth upto 0.5m & 5Kg cement concrete cover with frame |
| 445 | Inside size 600x450mm depth upto 0.5m & 5Kg cement concrete cover with |
| 446 | -do- depth upto 0.5mtr to 1.0mtr |
| 447 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : |
| 448 | Exposed on wall |
| 449 | 50mm dia nominal bore ('B' Class) |
| 450 | 65 mm dia nominal bore ('B' Class) |
| 451 | 80 mm dia nominal bore ('B' Class) |
| 452 | P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. |
| 453 | 25 mm dia nominal bore. |
| 454 | 32 mm dia nominal bore. |
| 455 | 40 mm dia nominal bore. |
| 456 | 50mm dia nominal bore. |
| 457 | 65mm dia nominal bore. |
| 458 | 80mm dia nominal bore. |
| 459 | Supply and installation of Premium quality sluice valve 100mm dia including all fittings as per approved by Engineer in charge |
| 460 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : |
| 461 | 20mm dia nominal bore |
| 462 | 25mm dia nominal bore |
| 463 | 32mm dia nominal bore |
| 464 | 50mm dia nominal bore |
| 465 | 80mm dia nominal bore |
| 466 | Providing and fixing Bitumen Paint Coating over G.I. Pipes Complete as per specifications : |
| 467 | 25 mm dia. |
| 468 | 40 mm dia. |
| 469 | 32 mm dia nominal bore |
| 470 | 50 mm dia nominal bore |
| 471 | 65 mm dia nominal bore |
| 472 | 80/100 mm dia nominal bore |
| 473 | P & F Foot valve of superior quality and approved make with fittings : |
| 474 | CI 50 mm |
| 475 | CI 65 mm |
| 476 | CI 80 mm |
| 477 | Supplying & Fixing RCC Manholes covers with frame of approved make (Light duty) |
| 478 | Size 500mm dia (double seal) |
| 479 | Size 600x450mm |
| 480 | Providing and fixing double acting air valve of approved quality |
| 481 | 50 mm dia |
| 482 | 80 mm dia |
| 483 | Providing Laying Jointing DI Pipe (Ductile iron pipe) of 100 mm dia ISI marked K-7 grade as per IS : 5329-2000 with internal cement mortar lining for potable water with rubber ring (EPDM/ SBR) Joints per IS : 5382-1985 complete including Hydraulic testing & commissioning as per Technical Specification. |
| 484 | Providing Laying Jointing DI Pipe (Ductile iron pipe) of 150 mm dia ISI marked K-7 grade as per IS : 5329-2000 with internal cement mortar lining for potable water with rubber ring (EPDM/ SBR) Joints per IS : 5382-1985 complete including Hydraulic testing & commissioning as per Technical Specification. |
| 485 | Supply installation, testing & commissioning of cast iron (CI) Butterfly Valvesof PN 16 rating |
| 486 | 65 mm nominal bore |
| 487 | 80 mm nominal bore |
| 488 | 100 mm nominal bore |
| 489 | Providing and fixing of C.I. 'Y' type strainer flanged with SS 304 perforated screen including nuts, bolts and rubber insertions etc |
| 490 | 80 mm dia |
| 491 | 100 mm dia |
| 492 | Supplying and installing Bourden type pressure gauges range 0 to 20 bar 10mm brass gauge cock brass pipe snubber etc complete. |
| 493 | Hot Dipped Puddle flange Length -400mm Class C pipe, Puddle Plate 6mm Thk of Size (450x450) welded in the centre of the pipe One End Threaded. |
| 494 | 65 mm dia |
| 495 | For 80 mm dia pipe |
| 496 | For 100 mm dia pipe |
| 497 | Water Supply Pumps |
| 498 | Providing, fixing and testing of packaged type skid mounted hydropneumatic with VFD on every pump, system type comprising of :- |
| 499 | (i) Design, engineer, procure, supply, test and commission a pre-engineered, factory fabricated, assembled & tested, fully integrated, highly efficient pump, IE2 motors, skid mounted, complete ready-to-connect packaged pressure booster station, complete with vertical multi stage centrifugal pumps connected in parallel, high efficiency IE2 motors, intelligent multi-pump controller, the controller shall be mounted in a control cabinet with an IP 55 enclosure of suitable rating; SS304 suction and delivery manifolds; isolation ball valves on suction and discharge of each pump; non return valve on discharge side of each pump; hot dip galvanised common base frame; and diaphragm pressure vessel PN10 |
| 500 | (ii) The pump shall have cast iron head and base, SS304 impeller, SS304 Casing, SS316 Shaft |
| 501 | (iii) The motor shall be of efficiency class IE2, insulation class F, enclosure class IP55, capable of operation at 3 phase, 50 Hz, 380-415 V, with built-in thermistor PTC |
| 502 | (iv) Pressure vessel of non corrosive SS304 Food Grade. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles with minimum capacity of 100 Litres |
| 503 | (v) Control Panel to be of enclosure class IP41, with programmable logic controller (PLC) for cyclic operation of pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter. Control panel should also consist of cooling fan. |
| 504 | (vi) Pressure tank capacity: (as per manufacturer recommendation) Note: Back up calculation need to be provided for the same. A pre-charged Carbon Steel body diaphragm tank shall be fitted to the discharge pipe with a compatible Butyl-rubber diaphragm. It shall supply water a very low flows to minimize frequent pump start and stop and water hammering. There shall be complete separation between water and air and there should be no contact between water and tank compounds to avoid corrosion. Bladders shall be suitable for sufficient elasticity to permit full expansion inside the tank to ensure better performance and longer working life. |
| 505 | (vii) Pressure switches bellow type fitted with micro switch and having maximum pressure and differential scale should confirming BS-6134 standards and IP55 protection class. |
| 506 | (viii) Ball valves to be used should be Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. NRVs to be used should be with Springs and O-Ring arrangement. |
| 507 | Pressure Transmitter (0-10/16/25bar, based on system design pressure) |
| 508 | Pressurge Gauge - 0-16bar |
| 509 | Suction & Delivery Manifolds - SS304 |
| 510 | One non-return valve and isolating valves for each pump is provided in delivery side and one isolating valve is provided in suction side. |
| 511 | Complete set system to be mounted on a common base frame and shall follow following duty. |
| 512 | Domestic water Hydropneumatic pumps |
| 513 | System Peak Flow : 310 LPM |
| 514 | Head : 65 M |
| 515 | Power : 10 HP |
| 516 | no. of pumps: 2(1w+1s) |
| 517 | flow per pump : 310 LPM |
| 518 | Bladder Vessel : 300 litre |
| 519 | Skid Assembly with butterfly valves to isolate each pump,NRV for each pump, suction and discharge manifold in GI.Y strainer at suction of pump set with butterfly valve. |
| 520 | Starter VFD (IP 55 rated) for each pump with Microprocessor panel with wiring upto pumps and VFDs with Control Panel mounted on skid Set 2 (1 W+ 1S) |
| 521 | Providing and fixing vertical in line SS centrifugal pumps with CI volute and SS impellar and with stainless steel shaft, mechanical seal and chrome steel shaft sleeve, connected to a TEFC induction motor suitable for 400/440 volts,1500 RPM, 3 phase 50 cycles A.C. supply having IP 55 protection enclosure. complete with base frame, vibration eliminating pads, nuts and bolts, pressure gauge on delivery side etc. with suction strainer ( Necessary RCC foundations as per requirement and as per instructions shall be provided by the agency ) |
| 522 | Providing and fixing heavy duty floating flange EPDM rubber expansion bellows with unit control (tie rod & gusset plate) as per manufacturers specifications of standard length complete with all accessories and a working pressure not less than 16 Kg./sqcm including rubber gaskets, flanges, nuts, bolts & washers complete as required. |
| 523 | Raw Water Transfer Pump (Flushing Pump in Main UGT to connect to flushing ring line) |
| 524 | Capacity : 205 lpm (Each) |
| 525 | Head : 65 m |
| 526 | Power : 7.5 HP |
| 527 | with 100% standby pumps |
| 528 | Total Cost of flushing pump with accessories 2Set (1 w+ 1 S) |
| 529 | SEWARAGE & DRAINAGE |
| 530 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. |
| 531 | 100mm dia |
| 532 | 150mm dia |
| 533 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete as per RajasthanP.W.D. specifications : (Width W=Diameter of pipe in Cm+30 Cm.)(Excluding cost of pipe). |
| 534 | 100mm dia S.W. Pipe. |
| 535 | 150mm dia S.W. Pipe. |
| 536 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+30Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe). |
| 537 | 100mm dia S.W. Pipe. |
| 538 | 150 mm dia S.W. Pipe. |
| 539 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. |
| 540 | Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. |
| 541 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete |
| 542 | 150mm dia Internal. |
| 543 | 200mm dia Internal. |
| 544 | 250mm dia Internal. |
| 545 | 300mm dia Internal. |
| 546 | 450mm dia internal |
| 547 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M 15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. |
| 548 | Depth upto 0.5mtr |
| 549 | Add /Deduct extra over item 3.17.1 for every addl. 0.10mtr depth above 0.5mdepth. |
| 550 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : |
| 551 | Depth upto 1.5mtr |
| 552 | Add extra over item 3.22.1 for every addl. 0.10mtr depth above 1.5m depth. |
| 553 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 554 | Inside size 450 x 450mm upto depth of 0.5m Cement concrete cover with frame |
| 555 | Inside depth upto 0.5mtr to 1.0mtr-do- |
| 556 | Construction of Open Surface Drain with 112mm thick brick masonry in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade C.C. flooring,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: |
| 557 | 250mm drain 300mm av. Depth |
| 558 | P & F M.S. Foot Rests in with C.M.,1:3, standard design in 20mm square M.S. bar 50 mm embedded in wall & 10 cms. projected out complete. |
| 559 | Supply & Installation of Oil Skimmer with Oil Trap Type :Belt Type,Belt Size:- 100mm X 1200mm (Circumfrence) Driven: Dive Pulley/with bottom pulley with oil stopper, Tray-To Collect Oil, Capacity :15 Ltrs/Hr. Motor;0.5HP 3Phase, Oil Trap (SS 304) Size-600mmX1000mmX600mm Ht. |
| 560 | SOLAR WATER HEATING SYSTEM |
| 561 | SITC of MNRE approved & confirming to IS:12933 P-1,2,3&5 Flat Plate Collector typesolar hot water system with collector,insulated stainless steel storage tank with electrical back up , MS stand for Collector & Tank etc. as required. of following capacity. |
| 562 | 250 litre/ day |
| 563 | 375 litre/ day |
| 564 | 500 litre/ day |
| 565 | 1000 litre/ day |
| 566 | BOREWELL |
| 567 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: |
| 568 | 200 mm dia Nominal bore. |
| 569 | Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). |
| 570 | 200 mm Nominal bore. |
| 571 | Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. |
| 572 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of gradeFe410 of following sizes at site of work. |
| 573 | 200 mm nominal bore |
| 574 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. |
| 575 | 200 mm Nominal Bore. |
| 576 | Testing verticality of tube-well by plumbing system and yield test and draw down test by pumping system as per IS: 2800 (Part II) 1979. |
| 577 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts completefor casing size: |
| 578 | 200mm dia. |
| 579 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holdingthe riser pipe assembly of submersible pump set. |
| 580 | Supply of 50mm dia G.I. medium class pipe(each length 5.8 m to 6.0m) tripod as per drawing and design with chain pulley of. 3MT capacity |
| 581 | Installation of submersible motor pump set in Tube-well/open well complete ( labour charges only) including transportation of tripod, chain pulley block & any |
| 582 | Providing and installing submersible pump and electrical panel suitable for 200 mm dia casing of bore with SS impeller, high tensile SS shaft, copper wound squirrel cage wet type induction motor 3000 rpm, 415 V, 50 Hz,3 phaseA.C. supply, conforming to ISS: 8034-1976, capacity 300-500 LPM at 80-120 m head along with a directly coupled submersible type squirrel cage electric induction 10 H.P(minimum). motor suitable for operation on 400 V, 3 phase, 50c.p.s. A.C. supply, water lubricated bearings and provided with pivoted segment type thrust bearings to withstand non-vertical lead with minimum wear and tear and duly fitted with device to take up the expansion of water with heating of motor, including supply, testing and commissioning of electrical panel from the same manufacturer, complete with all accessories in all respects. The contractor to obtain approval for model and make of pump set & suitable Electrical panel after having yield report of fully developed tube well and submite actual bore strata chart. |
| 583 | including supplying laying and fixing water proof PVC insulated flat submersible cable 3x10 sqmm with end termination with its accessories. complete in all respect as required. 1 No. 3 Phase, fully automatic star-delta starter, type - IIof 15 HP with thermal overload relay, contactor, Timer, Push Buttons and Auto- manual selector switch etc complete as required. |
| 584 | RAIN WATER HARVESTING |
| 585 | Construction of tubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with \\"code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemed completed only after obtaining sound free water during pumping. |
| 586 | 200 mm nominal bore |
| 587 | 250 mm nominal bore |
| 588 | Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. |
| 589 | Diameter 900 mm |
| 590 | Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20mix with 40 mm thickness |
| 591 | Diameter 900 mm |
| 592 | Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc. |
| 593 | Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) markclass II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer |
| 594 | Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids |
| 595 | Size 9 to 12 mm |
| 596 | Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse,without deduction of voids. |
| 597 | EARTH WORK |
| 598 | Excavating trenches of required width for pipe cables, etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20 Cm. In depth including consolidating each deposited layer by ramming watering etc. and disposing of surplus excavated soil as directed within a lead of 50 Mtr.: |
| 599 | All Kinds of Soil. |
| 600 | Pipes cables etc. not exceeding 80 mm dia |
| 601 | Pipes cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 602 | Pipes cables etc. exceeding 300 mm dia but not exceeding 600 mm dia |
| 603 | Add extra in item No. 1.10for excavating trench for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 Mtr. but not exceeding 3 Mtr. |
| 604 | Pipes cables etc. not exceeding 80 mm dia |
| 605 | Pipes cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 606 | Pipes cables etc. exceeding 300 mm dia but not exceeding 600 mm dia |
| 607 | EFFLUENT TREATMENT PLANT(ETP) - |
| 608 | Providing and fixing packaged type Effluent treatment plant including design/shop drawing and obtain the approval from HSCC,erection,commissioning,construction of ETP including mechanical,electrical, civil works(excluding),piping work complete, in all respect on turnkey basis.The system should be fully automatic with level control,compact,odor free and shall consume low power. ETP will be placed near STP site of the building of suitable size for 20 KLD required to treat the effluent of lab,laundry,kitchen and hospital facilities by using suitable technology complete in all respect including oil and grease trap/chemical reaction with suitable chemical dosing such as Fentons reagent or any other suitable for effluent/mixer/settler/neutralisation chamber,dosing pump and agitator ,holding tank,including multigrade filter stand by motor pump,blower etc. pumps and piping,filter,sludge holding tank,filter press,testing kit,electrical panel,air blower,RCC Equilisation tank/holding tank.Treated water transfer pump anchart. ct. Civil work to be Please Enable Macros to View BoQ information |
| 609 | Providing and fixing packaged type Effluent treatment plant including design/shop drawing and obtain the approval from HSCC,erection,commissioning,construction of ETP including mechanical,electrical, civil works(excluding),piping work complete, in all respect on turnkey basis.The system should be fully automatic with level control,compact,odor free and shall consume low power. ETP will be placed near STP site of the building of suitable size for 20 KLD required to treat the effluent of lab,laundry,kitchen and hospital facilities by using suitable technology complete in all respect including oil and grease trap/chemical reaction with suitable chemical dosing such as Fentons reagent or any other suitable for effluent/mixer/settler/neutralisation chamber,dosing pump and agitator ,holding tank,including multigrade filter stand by motor pump,blower etc. pumps and piping,filter,sludge holding tank,filter press,testing kit,electrical panel,air blower,RCC Equilisation tank/holding tank.Treated water transfer pump anchart. ct. Civil work to be Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender