Housing Urban and Rular Development Government Departments Closing in 9 days TDR #58557433

Tender For maintenance Of Different M.I. Schemes Under W.R Sub-Division, Amarpur, Gomati Tripura/ Sh: Repairing Of Pump House And Other Allied Works Etc. At Different L.I Schemes Within Amarpur Block Area During The Year 2026-27.

Issued by Government Departments · Gomati, Tripura
Tender Value
8.77 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
17557
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for maintenance Of Different M.I. Schemes Under W.R Sub-Division, Amarpur, Gomati Tripura/ Sh: Repairing Of Pump House And Other Allied Works Etc. At Different L.I Schemes Within Amarpur Block Area During The Year 2026-27.

BOQ

Name of Work:- Mtc. Of different M.I. Schemes under W.R Sub-Division, Amarpur, Gomati Tripura/ SH: Repairing of Pump House and other allied works etc. at different L.I Schemes within Amarpur Block area during the year 2026-27.
Sl. No. Item Description
1Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engg-in-charge.
2Charges for fixing corrugated G.S. Sheet roofing fixed with polymer coated J or L hooks 8 mm diameter, bolts and nuts 6 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with lead and including a coat of approved steel primer.(i) 0.63 mm thick with zinc coating not less than 275gm/m²
3Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.(i) 0.63 mm thick with zinc coating not less than 275 gm/m²
4Providing and fitting G.C.I sheet (0.63 mm thick) for walling including Vertical/curved surface fixed with galvanized steel J or L hooks 8 mm diameter, bolts and nuts with bitumen and G.I limpet washers or with G.I. limpet Washers filled with white lead and including a coat of appoved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / Verticle or curved surfaces) excluding the cost of G.S. sheet purlins rafters and trusses and including cutting to size and shape wherever required as per direction of Engineer -in-Charge.
5Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.i) 0.63mm thick with zinc coating not less than 275gm/m².
6Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :(i)Of sectional area 40 sq cm and below.
7(ii) Of sectional area beyond 40 sq cm.
8Labour charge for fitting fixing old timber in/c. cutting, fitting & fixing in position of wood work in frames wrought framed etc. asper direction of the Engg-In-Charge.
9Providing wood work in frames of false ceiling, partitions etc. sawn and fixing in position .(iv) Other wood (Jam, Garjan, Chamal)
10Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge(i) Local Teak wood.(b) 30 mm thick shutters
11Providing & fitting, fixing soft wood (chamal) EVE Board 25 mm thick & 225 mm wide in/c. painting two coats complete as directed.
12Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engg-in-charge.(i) Nominal concrete 1 : 3 : 6 or richer mix (i/c equivalent design mix)
13Providing and laying in position specified grade of cement concrete excluding the cost of centering and shuttering.All work up to Plinth level.i) 1 : 3 : 6 ( 1 cement : 3 fine sand : 6 graded well burnt brick aggregate of 40 mm nominal size)
14Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. all complete as per direction of Engineer-in-charge.(i) 40 mm thick with 20 mm well burnt brick aggregate.
15First class brick work in foundation and plinth including cost of all materials as required complete.i) In Cement mortar 1:4 (1 cement : 4 fine sand)
16Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.completeas per direction of the Engineer- in-charge.
1712 mm cement plaster of mix.(i) Cement mortar 1:4 (1 cement:4 fine sand)
18Neat cement punning.
19Painting on G.S. sheet with synthetic enamel paint ( one or more coats ) of approved brand and manufacture of required colour to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge:-
20Painting with synthetic enamel paint (one or more coats) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engg-In-Charge.
21Providing and fixing in position 1 mm thick M.S. sheet door with frame of (40 x 40 x 6) mm angle iron and 3 mm thick M.S. gusset plates at the junctions and corners, and with cleats with bolts and nuts rivets locking arrangement handles hooks and eyes inlets including embedding in cement concrete of reqired grade for fixing in position all necessary fittings including applying a priming coat of approved steel primer etc. complete as required.(i) Using MS angles (40x40x6) mm for diagonal braces.
22Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(a) Hot finished welded type tubes
23Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional/ replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge.
24Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items in/c. 2 nos. MS angle post (Size 50x50x6mm 2.80 Mtr. long) nuts & bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feet x 1feet x 2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engg-in-Charge.b) Size 1.20 x 1.20 x 0.025 mtr.
25Supplying and filling in plinth, under floor, foundations etc. with sand(fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
26Earthwork in excavation by mechanical means (Hydraulic exavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
27Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:- In cement mortar Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58557433
AUTHORITY Government Departments
TENDER VALUE 8.77 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for maintenance Of Different M.I. Schemes Under W.R Sub-Division, Amarpur, Gomati Tripura/ Sh: Repairing Of Pump House And Other Allied Works Etc. At Different L.I Schemes Within Amarpur Block Area During The Year 2026-27.
Basic Detail
Tender No 48/EE/WR-III/UDP/DNIeT/2026-27
Bidding Type Tender
Location
City Gomati
State Tripura
Key Dates
Publish Date 16 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 8.77 Lakhs
Tender Fee 1000
EMD 17557
Exemption Not Available
Document List
b0805fc8-bda9-446c-9d6b-f71940a1d7d2.html
BOQ_80459.xls
dniet48.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

b0805fc8-bda9-446c-9d6b-f71940a1d7d2.html

xls

BOQ_80459.xls

pdf

dniet48.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender