Tender For maintenance Of Different M.I. Schemes Under W.R Sub-Division, Karbook/ Sh: Repairing Of Pump House And Other Allied Works Within Karbook & Silachari Rd Block During The Year 2026-27.
Tender Value
9.45 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
18908
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of Different M.I. Schemes Under W.R Sub-Division, Karbook/ Sh: Repairing Of Pump House And Other Allied Works Within Karbook & Silachari Rd Block During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:-Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)Pump house floor- 1x2x3.00x2.50x0.075=1.125 cum 1x3x2.50x1.50x0.075=0.84 cum 1x4x3.25x2.75x0.075=2.68 cum Total=4.645 cum |
| 2 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge:-In cement mortar.Pump house brickwall- 1x3x2.50x0.254x0.30=0.57 cum 1x6x3.00x0.254x0.30= 1.37 cum 1x4x3.20x0.254x0.30= 0.97 cum Total= 2.91 cum |
| 3 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. Pump house roof- 1x15x4.50x4.20=284.00 sqm |
| 4 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 sq cm and below.Roof runner- 1x2x14x6.00=168.00 m |
| 5 | Of sectional area beyond 40 sq cm.Pump house post- 1x5x6x0.10x0.10x2.80=0.84 cum 1x6x4x0.10x0.10x3.00=0.72 cum Total= 1.56 cum |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sqm and below.Door- 1x04=04.00Windows- 1x05=05.00 Total= 09.00 |
| 7 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. Priming tank (outside)- 1x6x2(2.00+1.80)x1.80=82.00 sqmPriming tank (inside)- 1x5x2(1.50+1.30)x1.80=50.00 sqm Total=132.00 sqm |
| 8 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.Pump house floor- 1x2x3.00x2.50x0.075=1.125 cum 1x3x2.50x1.50x0.075=0.84 cum 1x4x3.00x2.75x0.075=2.475 cum Total=4.44 cum |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:3:6 (1 Cement: 3 fine sand : 6 graded well burntbrick aggregate 20 mm nominal size)Pump house floor- 1x3x2.70x2.00x0.100=1.62 cum 1x3x2.10x1.50x0.100=0.945 cum 1x2x3.25x2.30x0.100=1.495 cum Total=4.06 cum |
| 10 | Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete.40 mm thick with 20 mm well burnt brick aggregatePump house floor- 1x3x6.00x4.00= 78.00 sqm |
| 11 | 12 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand)Pump house wall- 1x3x4.60x2.50= 34.50 sqmPriming tank (outside)- 1x5x2(2.00+1.80)x1.80=68.40 sqmPriming tank (inside)- 1x4x2(1.50+1.30)x1.80=40.32 sqm Total= 143.22 sqm |
| 12 | Neat cement punning.Priming tank (outside)- 1x6x2(2.00+1.80)x1.80=82 sqmPriming tank (inside)- 1x5x2(1.50+1.30)x1.80=50 sqm Total=132.00 sqm |
| 13 | Providing and fixing of GI pipes for column post complete with necesarry M.S. square plates and making holes (16 mm dia) in/c cutting & placing complete as per direction of the Engineer-in-Charge.a) 80 mm dia NomPump house column post- 1x6x6.00= 36.00 minal bore |
| 14 | Providing and fixing M.S. round holding down bolts with nuts and washer plates complete as per standard design.Lumpsum- 1x25.00= 25.00 kg |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes. Pump house roof- 1x15x4.50x4.20=284 sqm |
| 16 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/m2Pump house roof- 1x15x4.50x4.20=284 sqm |
| 17 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275gm/m2pump house ridge/hip- 1x7x5.00= 35.00 m |
| 18 | Providing and fitting G.C.I sheet (0.63 mm thick) for walling including Vertical/curved surface fixed with galvanized steel J or L hooks 8 mm diameter, bolts and nuts with bitumen and G.I limpet washers or with G.I. limpet Washers filled with white lead and including a coat of appoved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ Verticle or curved surfaces) excluding the cost of G.S. sheet purlins rafters and trusses and including cutting to size and shape wherever required as per direction of Engineer -in-Charge.Pump house walling- 1x10x6.00x3.00= 180.00 sqm 1x5x4.00x0.5(3.00+2.80)= 58.00 sqm Total= 238.00 sqm |
| 19 | Charges for fixing corrugated GS Sheet roofing/ walling fixed with polyer coated J or L hooks 8 mm diameter, bolts and nuts 6 mm diameter with bitumen & GI limpet washers filled with lead and including a coat of approved steel primer.0.63 mm thick with zinc coating not less than 275gm/m2Pump house roofing- 1x10x3.50x2.50 = 87.50 sqmPump house walling- 1x7x3.00x3.00= 21.00 sqm 1x5x2.00x0.5(3.00+2.80)= 29.00 sqm Total= 137.00 sqm |
| 20 | Providing and fixing 1 mm thick M.S. sheet door/ window with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-Using flats 30x6mm for diagonal braces and central cross piece.Pump house door- 1x3x1.10x2.10= 6.93 sqmPump house window- 1x2x1.00x1.20= 2.40 sqm Total= 9.33 sqm |
| 21 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding. (Lumpsum- 1x20.00= 20.00 kg) |
| 22 | Fixed to openings /wooden frames with rawl plugsscrews etc. (Lumpsum- 1x45.00= 45.00 kg) |
| 23 | Painting on G.S. sheet with synthetic enamel paint (oneor more coats) of approved brand and manufacture of required colour to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge:-Pump house roofing- 1x4x9.50x4.60= 174.80 sqm 1x7x6.50x4.50= 204.75 sqmPup house walling- 1x4x9.00x3.00= 108.00 sqm 1x6x6.00x3.00= 108.00 sqm Total= 595.55 sqm |
| 24 | Finishing with Epoxy paint (two or more coats) of approved brand and manufacture at all locations prepared and applied as per manufacturer's specification including appropriate priming coat, preparation of surface etc. complete [Payment shall be made after submission of Test Certificate issued by the Manufacturer].On steel workPump house door- 1x6x1.10x2.10x2.25times= 31.185 sqmPump house window- 1x9x1.00x1.20x2.25times= 24.30 sqm Total= 55.48 sqm |
| 25 | Labour charge for fitting and fixing old timber including cutting, fitting and fixing in position of wood work in frames, wrought frames etc. as per direction of the Engineer-in-Charge.Pump house post- 1x4x3x0.10x0.10x2.00=0.24 cum 1x3x3x0.10x0.10x2.50=0.225 cum Total= 0.465 cum |
| 26 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.Pump house- 1x6= 06 nos. |
| 27 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. Hiring Charge- 1x3= 03 days. |
| 28 | First class brick work in foundation and plinthincluding cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).Pump house wall- 1x2(9.00+4.00)x0.254x0.30= 1.98 cum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender