Water Resources and Irrigation Government Departments Closing in 18 days TDR #58557389

Tender For Installation And Energisation Of Khasbahal-V And Khasbahal-Iv L.I. Project Under Kesinga Block In Kalahandi District Out Of Ridf-2026-27

Issued by Government Departments · Kalahandi, Odisha
Tender Value
1.31 Crore
Estimated cost
Bid Submission
07 Dec 2026
18 days left
EMD
1.31 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kalahandi → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Installation And Energisation Of Khasbahal-V And Khasbahal-Iv L.I. Project Under Kesinga Block In Kalahandi District Out Of Ridf-2026-27

BOQ

Name of Work:- INSTALLATION AND ENERGISATION OF KHASBAHAL-V AND KHASBAHAL-IV L.I. PROJECT UNDER KESINGA BLOCK IN KALAHANDI DISTRICT OUT OF RIDF-2026-27
Sl. No. Item Description
1Earthwork in excavation of foundation in hard soil such as hard stiff clay,stiff black cotton,hard red earth,shales,moorum ordinary gravels etc. including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. (Excavation by mechanical means 60% and manually 40%)
2Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge.
3Construction of 3.50 MTR. Dia R.C.C.well sinking in soft rock to line levels and plumb by scooping out from inside and below the staining including cost of hire running charges of tools and plants and supplying & working of pumps bailing out of water and removal of all materials and obstacle from inside the well by divers etc including precuation against shifting and tilting disposal of the soil with all leads and lift etc. complete as direction by the Engineer -in-charge
4Filling the foundation and plinth in hard soil with excavated material in layers not exceeding 0.30m including breaking of clods within 50m initial lead including lavelling the trenches as the case may be etc. complete as directed by the Engineer-incharge quality of means of mechanical 60% & manually 40% i.e. of respective item no. 1
5Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. i.e. respective of item no.2
6Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.
7Cement concrete (1:3:6) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.
8Cement concrete (1:2:4) with 12mm size black C.B. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge.
9Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.
10Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in Super Structure etc. complete as per the Engineer-incharge.
1112mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
12Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
13Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.(a)R.C.C. foundation and Plinth bend and footing bases of columns, mass concrete, pre-cast slabs etc.
14R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
15Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Steel Bar (FE 415/ FE 500)
16Wall painting 2 coats with cement paint of approved shade on new work over coat of primer to give an even shade including cost of paint.
17Distempering two coats to walls with distermper of approved shade on new work to give an even shade including cost of distemper & labour etc. complete.
18Cost of 47mm dia steel pipe of length 6.1Mtr for Stainless steel Display board
19Cost of thick steel plate of 4mm thick of size for Stainless steel Display board
20Cost of Fabricated M.S door & Window of Size 1.2x1.98 M & 0.60 X 0.75 M including trnsportation form work shop to work site and painting of door with approved paint 2 coat including cost of paint
21Making step iron into 20 mm dia steel bar and fixing into walls of the intake well dully emboded in cement concrete(1:2:4) propertion using 12 mm size CBHG chips as per specification.
22Cost of C.C Ventilator (size 0.45x0.30m)
23Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing and stickering on the satinless steel display board etc. complete as per the direction of the Engineer-incharge.
24Supplying of 250mm dia HDPE Pipe (PE-80 PN -4) including Pre & Post delivery CIPET Testing Fees
25Supplying of 160mm dia HDPE Pipe (PE-80 PN -4) including Pre & Post delivery CIPET Testing Fees
26Supplying all materials, labour, T&P for jointing of 250 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge
27Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge
2810 HP/7.5 KW Energy efficiency Submersible pump set of total head 25 mtrs having discharge 1300 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all Taxes excluding cost of GST
2912.5 HP/9.375 KW Energy efficiency Monoblock pump set of total head 20 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all Taxes excluding cost of GST
30Control out door Pannel with Automatic Star delta Starter,6KVAR Capacitor,63Amp Main switch, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification with 4nos, MS Leg including all Taxes excluding cost of GST
31Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red oxide primer and two coats of smoke gray / navey blue enamel n both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board.
32Base Plate made of MS Channel with holes
333x 16 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below 0 .9mtr. of the ground and filling the excavated materials including watering and ramming.
344mm² 3 core submersible flat cable of ISI
35100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark.
36100 mm dia G.I. bend IS No.1239(Part-II/1992)
37100 mm Ø C.I. Foot Valve should be of swing type friction less with single disc confirming to IS – 4038/1979 of reputed brand
38100 mm dia G.I. flange IS No.6392 / 1971
39100 mm Ø Sluice Valve Flanged type of Manufacturing Standard - BS 5163 / IS14846 Pressure Ratings PN10.
40100mm Non-return valve C I double flanged swing type PN - 1.0 as per IS:5312 part-I with by-pass arrangement
41273mm MS Pipe with plain ends in random length of 4 to 7 mtrs. Confirming to BIS 3589 with minimum wall thickness of pipe should be 5.5mm each pipe should bear ISI specification and manufacturers name/trade mark.Steel grade of pipe should be Fe330.
42Cost of 273mm MS/Steel Flange
43Welding,laying & fitting of 273mm dia MS Pipe
44150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
45160X160X110mm dia G.I. outlet Tee made with 151mm ID and 159 mm OD GI Pipe of 8mm thick 400mm long fitted with 1 mtr long 100mm dia G.I.Pipe welded with 2 nos of 100mm dia G.I.Flange in between the 1 mtr G.I..Pipe and 0.25 mtr long 100 mm dia G.I. Pipe fitted horizentally with 2 mtrs of 100mm dia G.I. Elbow with water locking arrangement made out of 1 no. of 100mm dia open flange and 1 no. of 100mm dia blind flange and with hinges gaskets arrangement that HDPE pipe should be inserted directly 100mm long inside the 151mm dia ID G.I.Pipe at the both ends .
46Cost of 250x250x250 mm spigot moulded reducing HDPE Tee 10 kg
47Cost of 250x250x160 mm spigot moulded reducing HDPE Tee 10 kg
48Cost of 250mm HDPE Tail piece 160 mm long
49Cost of 160mm HDPE Tail piece 160 mm long
50Cost of 250mm dia HDPE elbow spigot design 6kg
51250 mm Ø slipon flange
52160 mm Ø slipon flange
53250 mm Ø HDPE End Cap
54160 mm Ø HDPE End Cap
55Cost of River Bank cutting & shaping for const. of P.F.
5650 mm Ø Air release valve with 250mm saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark.
57100x100x25mm G.I. Tee with Plug with 25x50mm GI Reducer and 50mm Ball Valve
58Cost of 250 mmx200 mm HDPE Reducer
59Cost of 250x250x100mm M.S. fabricated \\"Y\\" joint
605/8 ' x12\\" Nut bolt & washer F.T. for foundation
615/8 ' x3\\" Nut bolt F.T. as per IS specification
621/2\\" x2 1/2\\" Nut bolt F.T.as per IS specification
63⅛\\" thick Rubber Insertion as per IS specification
64Cost of 300 mm R.C.C. hum pipe( NP 3 )as per specifications including laying & fitting
65Cost of 160x160x160 mm spigot moulded reducing HDPE Tee 10 kg
66Labour charges for installation of 10/12.5/15HP Motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the Engineer-incharge.
67Construction and erection of 11 /0.4 KV , 63 KVA Double Pole mounted Substation with 3.6mtrx3mtrx1.5mtr height masonary boundary wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 400 kg 10 mtr long PSC pole,transformer hard channel top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5) A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices all other necessary fittings i.e required size Nuts Bolts, Brackets, Cable, Cable Sockets as per TPWODL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection commissioning as per specification of TPWODL etc complete.
68Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 400 kg 10 M long PSC Pole with 55 Sqmm AAA Conductor average span 50mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T C Disc. polymer Insulators in tension point 11 KV Pin Polymer insulators, Couping Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required. including cost of all materials, labour transportation,inspection commissioning etc. complete including all Taxes excluding cost of GST.
69Construction of 3 Phase L.T line as per REC standard confirming to RE rule 1956 with 300Kg 9 Mtr long PSC pole support in 0.30M span length with 3x35mm² +1x25 mm ² LT, XLPE AB cable with coil earthing device, LT dead end clam, Suspension clamp with G I hook , stay accessories such as wire insulator , clamp etc. nut bolts, alongwith concreting copping padding of poles and stayset as per direction of Engineer in Charge including all Taxes excluding cost of GST.
70Earthing installation with required earthing materials like charcoal, common salt, conduit pipe, soft solder alcaps ,nuts & bolts, cable socket etc. including excavation of earth pits 2 Nos of size 1200mm X1200mm X 3200mm for fixing of earthing pipe 2 Nos of size 40mm dia X 3000 mm length with required slotting in pipes & fittings with 40 mm dia G.I.Flange etc. includidng excavation of earthing trench for laying of earthing G.I.Wire & filling the Trench Pits after fixing of pipes on completion on earthing work and pannel wiring with required 4mm2/2.5mm2 PVC coper wire including supply & transportation of materials to work site as per the direction of site Engineer in-charge
71Construction of 11 K.V.Tapping Pole/Interposing pole with 10 mtr. PSC pole including cost of construction, construction materials involved, transportation of materials involved, taxes and cess ect complete excluding GST. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58557389
AUTHORITY Government Departments
TENDER VALUE 1.31 Crore
LAST DATE 07-12-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Installation And Energisation Of Khasbahal-V And Khasbahal-Iv L.I. Project Under Kesinga Block In Kalahandi District Out Of Ridf-2026-27
Basic Detail
Tender No OLIC-BPT-01/2026-27 Dt.06.11.2026
Bidding Type Tender
Location
City Kalahandi
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 1.31 Crore
Tender Fee 11800
EMD 1.31 Lakhs
Exemption Available
Document List
BOQ_621495.xls
c4aa04ff-8172-48e0-a4a9-b6e8047a0931.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_621495.xls

html

c4aa04ff-8172-48e0-a4a9-b6e8047a0931.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender