Agriculture Boards / Undertakings / PSU Closing in 18 days TDR #58557049

Tender For Renovation Of Officers Lounge, Staff Canteen And Kitchen At Nabard Head Office, Bandra Kurla Complex (Bkc), Mumbai - S/H : Supply, Installation, Testing And Commisioning Of Commercial Kitchen Equipment

Issued by Boards / Undertakings / PSU · Mumbai Suburban, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Dec 2026
18 days left
EMD
6.32 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Officers Lounge, Staff Canteen And Kitchen At Nabard Head Office, Bandra Kurla Complex (Bkc), Mumbai - S/H : Supply, Installation, Testing And Commisioning Of Commercial Kitchen Equipment

BOQ

Name of Work:- RENOVATION OF OFFICERS LOUNGE, STAFF CANTEEN AND KITCHEN AT NABARD HEAD OFFICE, BANDRA KURLA COMPLEX (BKC), MUMBAI - S/H : SUPPLY, INSTALLATION, TESTING AND COMMISIONING OF COMMERCIAL KITCHEN EQUIPMENT
Sl. No. Item Description
1DISH WASH AREA
2Soiled Dish Receiving Table DIMENSIONS -1800mm x 700mm x 850mmm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
32 Sink Pre Rinse UnitDIMENSIONS - 1300mm x 700mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
4Pre Rinse Showermake: - T & S BRASS & BRONZE WORKS (EX - 1DP00H)
5Clean Dish Table DIMENSIONS - 1250mm x 700mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
6Rack Conveyor Dish Washer with Drying Zone (Right to Left) & dosing pumpDIMENSIONS - (2000mm x 800 mm x 1850mm)make: - WINTERHALTER (C 50 SINGLE RINSE)
7Roller TableDIMENSIONS - 1400mm x 700mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
8Clean Dish Rack (5- Shelves)DIMENSIONS - 1800mm x 600mm x 1650mmof APPROVED MAKE / CUSTOM FABRICATED
9Hood Type Dishwasher (Electrically Operated) DIMENSIONS - (746mm x 750 mm x 1549mm)make: - ELECTROLUX (505089 (NHT8P))
10Water Softener DIMENSIONS - (273mm x 273mm x 1617mm) + 323mm x 323mm x 1000mmMake:- PENTAIR (PWCE54P12)
11Garbage BinDIMENSIONS - Dia 450mm x 700mm Ht Cap: 80 Ltrs.Make:- SINTEX (CV-08-01) / Nilkamal wbr80lgrey or approved make
12Grease ChamberDIMENSIONS - 508mm x 410mm x 250mmof APPROVED MAKE / CUSTOM FABRICATED
13Insect KillerMake:- TECHNOCRAT (TRAPPER)
14120 Liters Green Dust Bins On Castors120 LITERS CAPACITY(500mm x 550mm x 1000mm)Make:- NEELKAMAL (WB 120 L1)
15Water Cooler 120 Lit Capacityof APPROVED MAKE / CUSTOM FABRICATED
16Storage Rack (5- Shelves)DIMENSIONS - 1500mm x 600mm x 1650mmof APPROVED MAKE / CUSTOM FABRICATED
17Multi Purpose Trolley DIMENSIONS - 600mm x 1200mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
18WET- PREP AREA
19Potato Peeler20 KG Capacity DIMENSIONS - 470mm x 800mm x 1140mmMake: - COSMOS (CP 20)
20Pulverizer (70 KG. / HR.)Make: - COSMOS (IMG 70) / 5 hp
21Tilting Commercial Wet Grinder15 Lit. CapacityDIMENSIONS - 765mm x 565mm x 1100mmMake: - COSMOS (CMG 15)
22Wet Grinder with Coconut Scraper (15 Lit.Capacity)of APPROVED MAKE / CUSTOM FABRICATED
23PRE-PREP AREA
24Work Table With 1 OH/CabinetDIMENSIONS - 1500mm x 750mm x 850mm + 450mm + 600mmof APPROVED MAKE / CUSTOM FABRICATED
25Crate TrollyDIMENSIONS - 500mm x 700mm x 900mmof APPROVED MAKE / CUSTOM FABRICATED
26Work Table with 1 OH/Cabinet & Sink on L.H.S.DIMENSIONS - 1800mm x 750mm x 850mm + 450mm + 600mmof APPROVED MAKE / CUSTOM FABRICATED
27Vegetable Cutting Machine. (Capacity : 150 – 225 Kgs / Hr)DIMENSIONS - 432mm x 813mm x 1016mmMake:- GAJANAN CANTEEN EQUIPMENT (GVC-1) / MODEL NO.:- VC-150K10H Floor Model or approved equivalent
28Work Table with Bottom Storage & 1 OH/CabinetDIMENSIONS - 1200mm x 750mm x 850mm + 450mm + 600mmof APPROVED MAKE / CUSTOM FABRICATED
29Work Table with 1 OH/Cabinet & Sink on R.H.S.DIMENSIONS - 1500mm x 750mm x 850mm + 450mm + 600mmof APPROVED MAKE / CUSTOM FABRICATED
30DOUGH PREP
31Planetary MixerDIMENSIONS - 620mm x 670mm x 1000mmMake:- SINMAG (SM - 401) or approved equivalent
32Spiral Dough Mixer ( 50 kg Flour Capacity ) DIMENSIONS - 640mm x 1080mm x 1220mmMake:- SINMAG (SM2 - 50T) or approved equivalent
33Work Table with 1 OH/Cabinet & Sink on L.H.S.DIMENSIONS - 1200mm x 750mm x 850mm + 450mm + 600mmof APPROVED MAKE / CUSTOM FABRICATED
34GN Pan TrolleyDIMENSIONS - 450mm x 600mm x 1800mmof APPROVED MAKE / CUSTOM FABRICATED
35Work Table with 2 U/SH DIMENSIONS - 900mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
36Stand for Combi OvenDIMENSIONS - 800mm x 800mm x 300mmof APPROVED MAKE / CUSTOM FABRICATED
37Combi Oven 5 GN 1/1DIMENSIONS - 750mm x 783mm x 675mm (Imported)Make:- UNOX (XEVC - 0511 - EPRM with kit) or approved equivalent
38Combi Oven Accessories
39Baking Tray (Perforated Nonstick Coated Baking Tray)DIMENSIONS - 530mm x 325mmMake:- ZANUFF (1/1 GN) or approved equivalent
40Stainless Steel TrayDIMENSIONS - 530mm x 325mmMake:- ZANUFF (1/1 GN) or approved equivalent
41Idli Tray (15 Idli)DIMENSIONS - 530mm x 325mmMake:- ZANUFF (1/1 GN) or approved equivalent
42Mini Idli Tray (60 Idli)DIMENSIONS - 530mm x 325mmMake:- ZANUFF (1/1 GN) or approved equivalent
43Skewer FrameDIMENSIONS - 530mm x 325mmMake:- ZANUFF (1/1 GN) or approved equivalent
44Skewer For The TrayDIMENSIONS - 530mm x 325mmMake:- ZANUFF (ROUND) or approved equivalent
45Dhokla TrayDIMENSIONS - 530mm x 325mmMake:- ZANUFF (1/1 GN) or approved equivalent
46Onion BinDIMENSIONS - 700mm x 650mm + 100mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
47Potato BinDIMENSIONS - 700mm x 650mm + 100mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
48Cocunut BinDIMENSIONS - 700mm x 650mm + 100mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
49POT WASH & POT WASH STORAGE
50Pre Rinse Shower (Wall Mounted) (Imported)Make:- T & S BRASS & BRONZE WORKS (EX-6WP12-H ) or approved equivalent
51Pot Rack Shleves ( 4 Shelves )DIMENSIONS - 2100mm x 900mm x 1650mmof APPROVED MAKE / CUSTOM FABRICATED
52Pot Rack Shleves ( 4 Shelves )DIMENSIONS - 1300mm x 700mm x 1650mmof APPROVED MAKE / CUSTOM FABRICATED
53NON VEG KITCHEN SECTION
54Sink UnitDIMENSIONS - 600mm x 700mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
55Work Table with 2 U/SH and Drawer on L.H.SDIMENSIONS - 1800mm x 700mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
56Wall CabinetDIMENSIONS - 950mm x 350mm x 600mmof APPROVED MAKE / CUSTOM FABRICATED
57Wall Cabinet
58Knife SterilizerIMPORTED (400mm x 140mm x 620mm)Make:- SIRMAN (STER UV 16W) or approved equivalent
592 Door Upright Combi (Refrigerator/Freezer)IMPORTED (700mm x 818mm x 1990mm)Make:- HOSHIZAKI (HRFWH77MS4 ) or approved equivalent
60Single Burner RangeDIMENSIONS - 900mm x 900mm x 600mmof APPROVED MAKE / CUSTOM FABRICATED
61Side Table with 2 U/SH DIMENSIONS - 900mm x 900mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
62Condiment Trolley DIMENSIONS - 1000mm x 800mm x 700mmof APPROVED MAKE / CUSTOM FABRICATED
63BULK COOKING AREA
64Milk Boiler (55 Ltr.Cap)DIMENSIONS - 900 Dia x 850 Ht.of APPROVED MAKE / CUSTOM FABRICATED
65Bulk Cooker (160 Ltr.Cap)DIMENSIONS - 900mm Dia x 850 Ht.of APPROVED MAKE / CUSTOM FABRICATED
66Tilting Brasing Pan (120 Ltr. Capacity)DIMENSIONS - 1350mm x 900mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
67HOT SECTION - 1
68Work Table with 2 U/SH DIMENSIONS - 600mm x 900mm x 850mm +100mmof APPROVED MAKE / CUSTOM FABRICATED
69Bulk Fryer ( Gas Operated )DIMENSIONS - 900mm x 900mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
70Single Burner Range DIMENSIONS - 600mm x 600mm x 600mmof APPROVED MAKE / CUSTOM FABRICATED
71Work Table with 2 U/SH DIMENSIONS - 1200mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
72Condiment Trolley DIMENSIONS - 800mm x 1000mm x 700mmof APPROVED MAKE / CUSTOM FABRICATED
733 Burner Range DIMENSIONS - 1800mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
742 Burner Range DIMENSIONS - 1200mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
75Work Table with Bottom StorageDIMENSIONS - 600mm x 900mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
76HOT SECTION - 2
77Work Table with 2 U/SH DIMENSIONS - 1000mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
78Dosa PlateDIMENSIONS - 1500mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
79Chapatti Plate with PufferDIMENSIONS - 1500mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
80Work TableDIMENSIONS - 1800mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
81Ingredient BinsDimensions: - 420mm x 750mm x 710mmMake:- CAMBRO (IBS27) or approved equivalent
82Dough DividerDimensions: - 420mm x 750mm x 710mmMake:- COSMOS (DD2500) or approved equivalent
83Work Table with 2 U/SH DIMENSIONS - 1350mm x 900mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
84Chapati Machine ( 1000 Roti / Hr.)Dimensions: - 2103mm x 731mm x 1432mmMake:- COSMOS (SCMG1000) or approved equivalent
85SMALL QTY HOT SECTION - 3
86Work Table with Part 2 U/SHDIMENSIONS - 2100mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
87Condiment Trolley DIMENSIONS - 800mm x 1000mm x 700mm of APPROVED MAKE / CUSTOM FABRICATED
88Deep Fat Fryer DIMENSIONS - 625mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
89Griddle PlateDIMENSIONS - 600mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
904 Burner Range DIMENSIONS - 750mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
91Work Table with Sink on L.H.S.DIMENSIONS - 1200mm x 600mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
92Work Table with Bottom StorageDIMENSIONS - 1500mm x 450mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
93Work Table with 2 U/SHDIMENSIONS - 1500mm x 450mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
94PANTRY SECTION
952 door Under Counter Chiller
96Wall Shelf DIMENSIONS - 1500mm x 375mm x 225mmof APPROVED MAKE / CUSTOM FABRICATED
97Hardcore JuicerDimensions: - BRANDEDMake:- LINCON (LJA-10) or approved equivalent
98Cold Press Juicer Dimensions: - 145mm x 240mm x 530mmMake:- SIRMAN (EKTOR 37) or approved equivalent
99Work Table with Sink on L.H.S.DIMENSIONS - 1250mm x 750mm x 850mm + 150mmof APPROVED MAKE / CUSTOM FABRICATED
1002 Door Upright ChillerDimensions: - 700mm x 818mm x 1990mmMake:- HOSHIZAKI (HRWH77MS4) or approved equivalent
101SERVING COUNTER-1
102Cutlery Dispenser - 3 ContDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (CCD03H) or approved equivalent
103Drop in Bain Marie (2 x 1/1 - 150 GN) Dimensions: - 615mm x 280mm x 200mmMake:- CORNELL (HBM2GD) or approved equivalent
104Drop in Bain Marie (3 x 1/1 - 150 GN) Dimensions: - 615mm x 280mm x 200mmMake:- CORNELL (HBM3GD) or approved equivalent
105Work Table with 2 U/SH DIMENSIONS - 700mm x 700mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
106Hot Holding CabinetDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (HBC19D) or approved equivalent
107Work Table with Sink on L.H.S with Bottom StorageDIMENSIONS - 1250mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
108Work Table with Bottom StorageDIMENSIONS - 900mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
109SERVING COUNTER-2
110Cutlery Dispenser - 3 ContDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (CCD03H) or approved equivalent
111Drop in Bain Marie (2 x 1/1 - 150 GN) Dimensions: - 615mm x 280mm x 200mmMake:- CORNELL (HBM2GD) or approved equivalent
112Drop in Bain Marie (3 x 1/1 - 150 GN) Dimensions: - 615mm x 280mm x 200mmMake:- CORNELL (HBM3GD) or approved equivalent
113Work Table with 2 U/SH DIMENSIONS - 700mm x 700mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
114Hot Holding CabinetDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (HBC19D) or approved equivalent
115Work Table with Sink on L.H.S with Bottom StorageDIMENSIONS - 1250mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
116Work Table with Bottom StorageDIMENSIONS - 900mm x 750mm x 850mm + 100mmof APPROVED MAKE / CUSTOM FABRICATED
117FAST FOOD COUNTER
118Cold Display CounterDIMENSIONS - 900mm x 700mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
119Hot Display CounterDIMENSIONS - 900mm x 700mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
120Work Table with Sink on R.H.S & 1 OH/SH with Bottom StorageDIMENSIONS - 160000mm x 750mm x 850mm + 375mmof APPROVED MAKE / CUSTOM FABRICATED
121BlenderDimensions: - 240mm x 280mm x 540mmMake:- TRUFROST (TruBlend Crush) or approved equivalent
122Work Table with Bottom StorageDIMENSIONS - 1600mm x 750mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
123Microwave oven (Capacity 21 Liters) Dimensions: - 475mm x 285mm x 460mmMake:- LG (MC2146BP) / Alternate Celfrost CMO25 or approved equivalent
124Sandwich GrillerDimensions: - SingleMake:- SIRMAN (Elio L-R) / ELIO RR or approved equivalent
125Pizza OvenDimensions: - 580mm x 490mm x 245mmMake:- SIRMAN (STROMBOLI) / STROMBOLI 1 or approved equivalent
126Pizza Makeup TableDimensions: - 900mm x 700mm x 1056mmMake:- HOSHIZAKI (RTSW97MS4-GNTE) or approved equivalent
127SERVING COUNTER-3
128Cutlery Dispenser - 3 ContDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (CCD03H) or approved equivalent
129Drop in Bain Marie (5 x 1/1 - 150 GN) Dimensions: - 1580mm x 660mm x 510mm + 310mmMake:- CORNELL (HBM5GD) or approved equivalent
130Drop in Bain Marie (1 x 1/1 - 150 GN) Dimensions: - 500mm x 660mm x 310mmMake:- CORNELL (HBM1GD) or approved equivalent
131Hot Holding CabinetDimensions: - 475mm x 600mm x 800mmMake:- CORNELL (HBC13S) or approved equivalent
132SERVING COUNTER-4
133Cutlery Dispenser - 3 ContDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (CCD03H) or approved equivalent
134Drop in Bain Marie (5 x 1/1 - 150 GN) Dimensions: - 1850mm x 660mm x 510mm + 310mmMake:- CORNELL (HBM5GD) or approved equivalent
135Drop in Bain Marie (1 x 1/1 - 150 GN) Dimensions: - 500mm x 660mm x 310mmMake:- CORNELL (HBM1GD) or approved equivalent
136Hot Holding CabinetDimensions: - 475mm x 600mm x 800mmMake:- CORNELL (HBC13S) or approved equivalent
137EXHAUST HOODS
138S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 1050mm x 1050mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
139S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 1050mm x 1050mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
140S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 5400mm x 1400mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
141S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 5050mm x 1150mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
142S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 4500mm x 1050mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
143S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 3200mm x 750mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
144S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 1800mm x 1050mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
145S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 4600mm x 750mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
146S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 2300mm x 900mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
147S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 800mm x 800mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
148S.S. Exhaust Singal Skin Hood with FiltersDIMENSIONS - 2800mm x 1050mm x 500mmof APPROVED MAKE / CUSTOM FABRICATED
149Exhaust Grill For S.W - SR. NO - 14.7 & POT WASH AREADIMENSIONS - 300mm x 200mmof APPROVED MAKE
150Fire Suppression System-The Fire Suppression System shall consist of wet agent tank, Heat sensing cable, Nozzles, and Piping.Temperature SensorThe system consists of automatic actuation.On actuation, the system starts spraying Synergy low PH – liquid fire suppressant on plenum area, cooking surface, exhaust duct system with predetermined flow rate.On contact with hot grease, it shall form a layer of soap like foam on the surface & shall act as an insulation between hot grease and atmosphere, which cuts down Oxygen Supply.The system shall be capable of shutting down other appliances on system actuation.Additional equipment such as gas shutoff valves, alarm, warning lights etc. shall be integrated with the system.The system shall be developed according to the NFPA & UL Standards and as directed by consultant.
151Gas ShutOff Valve (GSV)
152GRATING & CORNER GUARD
153S.S Grating DIMENSIONS - 300mm x 300mmof APPROVED MAKE / CUSTOM FABRICATED
154S.S Grating DIMENSIONS - 300mm x 300mmof APPROVED MAKE / CUSTOM FABRICATED
155S/S Corner Guard DIMENSIONS - 2400 MM Ht.of APPROVED MAKE / CUSTOM FABRICATED
156SERVING COUNTER-5
157Cutlery Dispenser - 3 ContDimensions: - 615mm x 280mm x 200mmMake:- CORNELL (CCD03H) or approved equivalent
158Drop in Bain Marie (5 x 1/1 - 150 GN) Dimensions: - 1850mm x 660mm x 510mm + 310mmMake:- CORNELL (HBM5GD) or approved equivalent
159Drop in Bain Marie (1 x 1/1 - 150 GN) Dimensions: - 500mm x 660mm x 310mmMake:- CORNELL (HBM1GD) or approved equivalent
160Hot Holding CabinetDimensions: - 475mm x 600mm x 800mmMake:- CORNELL (HBC13S) or approved equivalent
161COUNTER-1
162Work Table with Sink on L.H.S with Bottom StorageDIMENSIONS - 1200mm x 750mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
163Work Table with Bottom StorageDIMENSIONS - 1200mm x 750mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
164Coffee GrinderDimensions: - Imported 280mm x 390mm x 650mmMake:- CARIMALI (X010M) / Hey cafe 600 or approved equivalent
165Coffee Machine (2 Groups)Dimensions: - Imported 585mm x 475mm x 500mMake:- CARIMALI (PRATICA E2) or approved equivalent
166Cold Display CounterDIMENSIONS - 1200mm x 750mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
167Ice Cream CabinetDIMENSIONS - 1200mm x 650mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
168COUNTER-2
169Ice Cream CabinetDIMENSIONS - 1200mm x 650mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
170Cold Display CounterDIMENSIONS - 1200mm x 750mm x 1200mmof APPROVED MAKE / CUSTOM FABRICATED
171Work Table with Bottom StorageDIMENSIONS - 1200mm x 750mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
172Work Table with Sink on R.H.S with Bottom StorageDIMENSIONS - 1200mm x 750mm x 850mmof APPROVED MAKE / CUSTOM FABRICATED
173Coffee Machine (2 Groups)Dimensions: - Imported 585mm x 475mm x 500mmMake:- CARIMALI (PRATICA E2) / LA CARIMALI bubble or approved equivalent
174Coffee GrinderDimensions: - Imported 280mm x 390mm x 650mmMake:- CARIMALI (X010M) / Hey cafe 600 or approved equivalent
175FOOD GRAIN STORAGE
176Cam Shelving Rack ( WITH FOLLOWING COMPONENTS)
177Post Dimensions: - 610mm x 1830mmMake:- CAMBRO (CPPK2472) or approved equivalent
178Shelves Dimensions: - 1220mm x 610mm x 1830mmMake:- CAMBRO (CPSK2448V1) or approved equivalent
179Shelves Dimensions: - 1525mm x 610mm x 1830mmMake:- CAMBRO (CPSK2460V1) or approved equivalent
1802 Door Upright ChillerDimensions: - 700mm x 818mm x 1990mmMake:- HOSHIZAKI (HRWH77MS4) or approved equivalent
1812 Door Upright FreezerDimensions: -700mm x 818mm x 1990mmMake:- HOSHIZAKI (HRWH77MS4 / HFW-77MS4) or approved equivalent
182S.S. Oil TrayDimensions: - 800mm x 1200mmMake:- CUSTOM FABRICATED or approved equivalent
183Sack PlatformDimensions: - 1200mm x 1000mm x 130mmMake:- NILKAMAL (SP 1210 ) or approved equivalent
184STORE FOR DISHES ETC.
185Cam Shelving Rack ( WITH FOLLOWING COMPONENTS)
186Post Dimensions: - 610mm x 1830mmMake:- CAMBRO (CPPK2472) or approved equivalent
187Shelves Dimensions: - 915mm x 610mm x 1830mmMake:- CAMBRO (CPSK2436V1 / CPSK2434V1 ) or approved equivalent
188Shelves Dimensions: - 1220mm x 610mm x 1830mmMake:- CAMBRO (CPSK2448V1) or approved equivalent
189Shelves Dimensions: - 1525mm x 610mm x 1830mmMake:- CAMBRO (CPSK2460V1) or approved equivalent
190Step In Refrigerator with Racks Dimensions: - 1800mm x 1200mm x 2100mmPreserva for +2 to +4 deg C, SS Exterior Finish, Alongwith Racks Make:- RINAC (PRESEVA)
191DETAILS OF VENTILATION WORKS AT HOT KITCHEN
192PROVIDING FRESH AIR FAN M.S BODY CAPACITY 34000 CFM FAN SPEED960 RPM MOTOR 25HP DRIVE V BELT DYNAMIC BALANCINGPROVIDING EXAUST CENTRIFUGAL FAN M. S BODY CAPACITY 7.5 HP FAN FAN SPEED 960 RPM 10000 CFM 3 PHS MOTOR
193RUBBER PAD PROVIDING AND FIXING
194NETS FOR COWL PIECE
195ALUMINIUM P Q GRILS AREA
196COLLOR DAMPER AREA
197VOLUME CONTROL DAMPER AREA
198CANVAS JOINT
199S .S. HOODS:PROVIDING AND FIXING 18 SWG 304 HIGH QLTY WITH OIL BUFFLE FILTER WITH OIL CAP AND WASHEBLE FILTER WITH WALL MOUNTING SUPPORT
200G I DUCTING WORKS - PROVIDING 22 SWG FABRICATION AND ERCETION G I FLANGE DUCT FOR 8 MM GI ROD WITH 8 MM NUTS WISHER AREA
201G I DUCTING WORKS -24 SWG AREA
202Erectio, Testing and Commisioning for Ventilation system
203Dynamic Balancing of Ventilation system
204Installation, Commisionning, Loading and Unloading Charges for Entire Kitchen Equipment
205Buyback of old Kitchen Equipment as per annexure attached in tender document and dismantlingof existing kitchen and shifting of kitchen to defunct area temporarily & set properly for preparation & maintenance for delivery of food item till completion of project
206COMPREHENSIVE ANNUAL MAINTENANCE CONTRACT for 5 years altogether after DLP for all Kitchen Equipment (VALUE should be between 0 to 0.10, means bidder shall not quote more than 10% of total cost upto row no.26 of BOQ) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58557049
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 07-12-2026
Authority
Authority Name National Bank For Agriculture And Rural Development
Work Description Tender for Renovation Of Officers Lounge, Staff Canteen And Kitchen At Nabard Head Office, Bandra Kurla Complex (Bkc), Mumbai - S/H : Supply, Installation, Testing And Commisioning Of Commercial Kitchen Equipment
Basic Detail
Tender No NB. DPSP/ HO/ HO Kitchen Renovation/ 95474 /2026-27
Bidding Type Tender
Location
City Mumbai Suburban
State Maharashtra
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 6.32 Lakhs
Exemption Not Available
Document List
46828f16-5872-47a8-b996-357b0d4a66e1.html
BOQ_982042.xls
BUYBACK.pdf
Drawing.pdf
Layout.pdf
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

46828f16-5872-47a8-b996-357b0d4a66e1.html

xls

BOQ_982042.xls

pdf

BUYBACK.pdf

pdf

Drawing.pdf

pdf

Layout.pdf

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender