Textiles Government Departments Closing in 19 days TDR #58557048

Tender For Repair Of The Auditorium False Ceiling And Wall Paneling In The Administration Building At Urja Vihar Parisar, Omkareshwar Power Station

Issued by Government Departments · East Nimar, Madhya Pradesh
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
19 days left
EMD
10000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Nimar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair Of The Auditorium False Ceiling And Wall Paneling In The Administration Building At Urja Vihar Parisar, Omkareshwar Power Station

BOQ

Name of Work:- Repair of the Auditorium false ceiling and wall paneling in the Administration building at Urja Vihar Parisar, Omkareshwar Power Station
Sl. No. Item Description
1Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling. Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.
2Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board Plain board conforming to IS: 2095- Part I: 2011 (Board with BIS certification marks).
3Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
4Providing and fixing in position wall Panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10- 0.20 for plain and designer 0.15- 0.40 for pinhole texture and NRC 0.45- 0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA- 32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.050 to 0.052 W/m. KC as per ECBC Code 2007, weight 1.900 Kg to 2.100 Kg per tile, density 450 Kg/m3 in edge portion (thickness 15 mm) and 350 Kg/m3 in central portion (thickness 10 mm), comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e. Vertical studs of size 48 x 34 x 36 mm are placed at 600mm centre to centre in a floor and ceiling channel section of size 50 x 32mm fixed to the floor and soffit at 600 mm centres using 12mm dia, 40mm long wedge type expanded zinc alloy dash fastener with 10 mm bolt. This same channel is then to be fixed in horizontal direction at 600mm centre to centre so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non - combustible panels/tiles are to be screw fixed with self-tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles.
5Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
6Providing and fixing aluminium composite panel with 3 mm thick ACP sheet in required pattern, colour and panel size including opening / folding panels, duly fixed extruded aluminium section frame duly fixed with screws etc. including fixing of ACP sheet with sealant compound wherever required as per direction of Engineer-in-charge; work up to 5.0 m above ground level.
7Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
8Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). Double strip (horizontal type).
9Providing and fixing bright finished brass handles with necessary screws etc. complete. 125 mm
10Providing and fixing bright finished brass handles with necessary screws etc. complete. 100 mm Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58557048
AUTHORITY Government Departments
TENDER VALUE 4.99 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name National Handloom Development Corporation Limited
Work Description Tender for Repair Of The Auditorium False Ceiling And Wall Paneling In The Administration Building At Urja Vihar Parisar, Omkareshwar Power Station
Basic Detail
Tender No NHDC/3C/385/NIT-814/26/868 dated 13.11.2026
Bidding Type Tender
Location
City East Nimar
State Madhya Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 08 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 4.99 Lakhs
Tender Fee 590
EMD 10000
Exemption Available
Document List
4682a205-e415-44d9-9ad0-6c0fb0b46aec.html
BOQ_981904.xls
tender385.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

4682a205-e415-44d9-9ad0-6c0fb0b46aec.html

xls

BOQ_981904.xls

pdf

tender385.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender