Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58556628

Tender For Repair And Maintenance Of Various Summer And Cooling Appliances At Otm & Central Institute At Mil Stn Dhrangadhra

Issued by Statutory Bodies & Commissions/Committees · Surendranagar, Gujarat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Dec 2026
16 days left
EMD
23000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of Various Summer And Cooling Appliances At Otm & Central Institute At Mil Stn Dhrangadhra

BOQ

Name of Work:- REPAIR AND MAINT OF VARIOUS SUMMER AND COOLING APPLIANCES AT OTM & CENTRAL INSTITUTE AT MIL STN DHRANGADHRA
Sl. No. Item Description
1Taking down of ceiling fan 1200/1400 mm sweep from existing position/hook, dismantling blades deposite to store and removing fan cleaning, servicing or re-fixing on same position after complete all as specified and directed.
2De-assembling (opening) of the ceiling fan, 1200mm/1400mm sweep for repair, removing existing burnt winding, rewinding as per existing winding the same gauge and weight with super enameled copper winding wire of appropriate gauge, slot insulation, heat varnishing, greasing and re-assembling including replacement of split pin and flexible twisted copper cable of 23/0.0076 gauge, testing including leath work complete all as specified and directed. Note:- (i) Contractor shall collect the Ceiling fan for repair from Store Yard/site of AGE E/M and fix the repaired fan on the location given by Engineer-in-charge. (ii) Where ever required the Ball bearing, bush and capacitor shall be measured and paid separately under respective item of this schedule as \\"Supply only\\".
3Supply only capacitor of 2.5 Mfd suitable for 1200/1400 mm sweep ceiling fan.
4Supply only ball bearing suitable for 1200mm/1400mm sweep ceiling fan.
5Supply only gun metal bush suitable for 1200/1400mm sweep ceiling fan of appropriate make.
6S&F, in repair, PVC canopy set (Upper & Lower) suitable for ceiling fans complete all as specified and directed.
7S & F in repair, ceiling fan down round metal rod/pipe of lenghts of one feet suitable for 1200 mm/1400mm sweep ceiling fan.
8S&F, in repair, MS hanging clamp with rubber bush, bolts, nuts & washer with split pin suitable for ceiling fan complete all as specified and directed.
9Disconnecting and removing the U/S Ceiling/fan and S&f in repair AC ceiling fan 1200 mm (BLDC) sweep with Accessires Complate with set of lades, down rod and set of canopy.
10S&F in repair, PCB circuit complete for BLDC fan as per fan manufacturer make complete all as specified and as directed by Engr-in-Charge
11S&f in repair fan blades (set of three blades) for 1200/1400 mm sweep ceiling fans complete all as specified and as directed by Engineer-in-charge.
12M & L Painting of ceiling fans complete, in situ/in store with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning/removing existing paint and all dust etc.
13M&L for lathe work to any type of fan for taking out bush from the lower body part of Ceiling/Exhaust fan and replacing it with suitable size of ball bearing as per matching size to shaft making necessary bearing boring, cutting, greasing, polishing of shaft Complete all as specified and as directed by Engineer-in-charge. Note : - Supply & fixing to Bearing shall be measured and paid separately under respective item of this Schedule.
14Taking down exhaust fan metal body of size 200/230/250/300/380/450 mm sweep from existing position, cleaning, servicing and re-fixing on same position complete all as specified and directed by Engr-in-charge.
15De-assembling (Opening) of exhaust fan 200/230/250/300 mm sweep for repair, removing existing burnt winding, rewinding as per existing winding gauge & weight with super enameled copper winding wire of approprite gauge, slot insulation heat varnishing, greasing, re-assembling, refixing, testing complete all as specified and directed. Note:- (i) Contractor shall collect the exhaust fan for repair from Store/Site Yard of AGE E/M and Refix repaired fan on the location given by Engineer-in-charge. (ii) Where ever required the Ball bearing, bush and capacitor shall be measured and paid separately under respective item of this schedule as \\"Supply only\\".
16De-assembling (Opening) of exhaust fan 380/ 450 mm sweep for repair, removing existing burnt winding, rewinding as per existing winding gauge & weight with super enameled copper winding wire of approprite gauge, slot insulation heat varnishing, greasing, re-assembling, refixing, testing complete all as specified and directed. Note:- (i) Contractor shall collect the exhaust fan for repair from Store/Site Yard of AGE E/M and Refix repaired fan on the location given by Engineer-in-charge. (ii) Where ever required the Ball bearing, bush and capacitor shall be measured and paid separately under respective item of this schedule as \\"Supply only\\".
17Supply only capacitor of 4.0 Mfd suitable for exhaust fan.
18Supply only ball bearing suitable for 200/230/250/300mm sweep exhaust fan complete.
19Supply only ball bearing suitable for 380/450 mm sweep exhaust fan complete.
20Supply only gun metal bush suitable for 200/230/250/300mm sweep exhaust fan complete.
21Supply only gun metal bush suitable for 380/450mm sweep exhaust fan complete.
22M&L for preparation of surfaces of exhaust fan of size 200/230/250/300/380/ 450mm including blade, frame/louver and apply one coat of synthetic enamel paint with spraying after taking down in respective items all as specified and directed by Engg-in-change.
23Taking down of exhaust fan PVC type 200/250/300mm sweep for repair, removing existing burnt motor and replacement of motor/fan blade etc. refixing, testing complete all as specified and directed. Note : Where ever required the fan motor/fan blade shall be measured and paid separately under respective item of this schedule as \\"Supply only\\".
24Supply only PVC exhaust fan motor suitable for 200/250/300mm sweep
25Supply only PVC exhaust fan blade suitable for 200/250/300mm sweep
26S&F exhaust fan, 200 mm sweep, 1200 rpm, PVC body, AC single phase, 230 volts, 50 Hz with louvers including connecting up with ceiling rose complete all as specified and as directed.
27S&F exhaust fan, 250 mm sweep, 1200 rpm, PVC body, AC single phase, 230 volts, 50 Hz with louvers including connecting up with ceiling rose complete all as specified and as directed.
28S&F exhaust fan, 300 mm sweep, 1200 rpm, PVC body, AC single phase, 230 volts, 50 Hz with louvers including connecting up with ceiling rose complete all as specified and as directed.
29S&F, in repair, fan motor (ISI Marked), 1/6 HP, 230 volt single phase of existing desert cooler with fixing clamps, complete all as specified and directed
30S&F, in repair, stainless steel fan motor blade, 230 volt single phase suitable for existing desert coolers with fixing clamps, nuts, bolts, washers etc. complete all as specified and directed
31S&F, in repairs, water lifting submerssible pump (ISI Marked) suitable to operate on 230V AC supply of desert cooler and connecting electically, complete all as specified and directed.
32S&F in repair, PVC distributer, Elbow and PVC pipe and Supply and fix new water distributer 3 way consisting 3 Nos of PVC elbow and 1/2 \\" heavy duty PVC Pipe of length upto 2 mtrs suitable for existing desert coolers.
33S&F, in repair, grass pads and wood wool pade, superior quality, of same size and good thickness set of 3 for desert cooler to the satisfaction of Engineer-in-Charge.
34S&F in replacement brackets for fan motors of desert cooler made out of flat iron of size 25mmX3mm, 300mm long, bent to shape and including drilling of holes (set of four) etc complete all as specified and as directed by Engineer-in-charge.
35S&F in replacement selector switch suitable and to match the existing desert cooler to match the existing suas per sample.
36Supply and fixing of steel body evaporative Duct Type desert cooler with fan motor (copper winding) (ISI marked to IS 996 latest), fan blade of 380mm sweep of aluminum material, 1400 RMP for 2000 cum/hr nominal air capacity, 3 Speed Control, wood wool filter pads of thickness size is 15mm or above with non-corrosive wire guard for filter pads, float valve at the inlet, submersible pump, the material of filter panel, grill, top of the cooler body is made of galvanized steel sheet of thickness not less than 0.8mm and sump/water tank of minimum 80 liters capacity including sheet thickness not less than 1.00mm with zinc coating not less than 100 gms/sq.meter and all internal surface of steel body painted with water-resistant paint to IS 9862 latest and brass/ss material drain 3 pin molded plug top of 5/6 amps plug ISI marked, 230 Volts, 50Hz, connecting cable and commissioning complete all as specified and directed.
37S&F, in repair, PVC insulated, sheathed cable 3 core, 1.5 Sqmm, multistandard copper conductors minimum length 2 mtr for Desert Cooler, water coolers/ refrigerators as main cord with 5A, 3 pin top complete all as specified and directed.
38Taking down/Disconnecting carefully water storage type water heater of 25/50 ltr cap of any make, disconnecting electric connection and dismantling for repair by taking out the syphon assembly of thermostat, heating element and cleaning, de-scaling the inner tank by chemical compound including soldering, brazing if required, Re-assembling and re-fixing the geyser after cleaning & servicing at existing position/location complete all as specified and directed. Note:- (i) Heating element, thermostat, air release valve, safty valve, indicating lamp and syphone assembly shall be measured and paid under relevant items as \\"Supply Only\\". (ii) The rate quoted are deemed to include cost of soldering/brazing work if required at site.
39Supply only heating element of 1.5 KW with circular or triangular base suitable for existing entry of geysers of any make complete all as specified and directed.
40Supply only heating element of 2.0 KW with circular or triangular base suitable for existing entry of geysers of any make complete all as specified and directed.
41Supply only thermostat assembly for existing geysers make, tempetrature setting up to 85 degree centigrade, ISI marked complete all as specified and directed.
42Supply only indicating lamp suitable for existing entry of geyser complete all as specified and directed.
43S&F, in repair, inlet/outlet (cold& hot) pipe of 15mm bore 400mm long, PVC connection, high density suitable for temperature upto 100 degree complete all as specified and directed.
44S&F, in repair, inlet/outlet (hot & cold) pipe of 15mm bore 600mm long, PVC connection, high density suitable for temperature upto 100 degree complete all as specified and directed.
45S&F, in repair, water storage type steel inner tank of 25 ltr capacity as per existing tank complete all as specified and directed.
46S&F, in repair, water storage type steel inner tank of 50 ltr capacity as per existing tank complete all as specified and directed.
47S&F, in repair, water storage type steel body outer tank of 25 ltr capacity as per existing tank complete all as specified and directed.
48S&F, in repair, semi circular bottom cover plate of 25/50 ltr capacity geyser duly painted of appropriate make complete all as specified and directed.
49S&F, in repair, Geyser syphon assembly (flange) made out of copper/steel as existing including heat resistance and leak proof gasket suitble for 25/50 ltrs capacity geyser all as specified and directed.
50S&F, in repair, safty relief valve, as per existing of 25/50 ltr capacity geyser complete all as specified and directed.
51S&F, in repair, pressure safty valve, as per existing of 25/50 ltr capacity geyser complete all as specified and directed.
52S&F, in repair, glass wool superior quality around the water container as heat resistance upto full capacity complete all as specified and directed.
53S&F in repair 3 Pin plug top, 15Amp, on 230 Volts AC.
54Cutting chasing in bricks/walls or concrete surfaces for GI tubing 15/20mm bore including making good with cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed by Engineer-in-charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58556628
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair And Maintenance Of Various Summer And Cooling Appliances At Otm & Central Institute At Mil Stn Dhrangadhra
Basic Detail
Tender No GE(A)/GNR/TOKEN/67 of 2026-27
Bidding Type Tender
Location
City Surendranagar
State Gujarat
Key Dates
Publish Date 16 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 23000
Exemption Available
Document List
BOQ_896408.xls
eb2b490a-928d-4462-b00a-691267436bba.html
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896408.xls

html

eb2b490a-928d-4462-b00a-691267436bba.html

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender