Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58556619

Tender For Special Repair To Bldg No P-50 Evatt Line At Grrc Lansdowne

Issued by Statutory Bodies & Commissions/Committees · Pauri Garhwal, Uttarakhand
Tender Value
24.41 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
48834
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Bldg No P-50 Evatt Line At Grrc Lansdowne

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO P-50 EVATT LINE AT GRRC LANSDOWNE
Sl. No. Item Description
1Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed.
2S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of colour, as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
3S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
4Dismantling of timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and as directed.
5M&L for second class soft wood as in timber scantling (clean sawn) as in framed work, complete all as specified and as directed.
6Dismantling of boarding of any deescription and fixed in any position with nails complete all as specified and directed.
7Dismantling of wall and ceiling boards ( fibre, pulp insulation etc) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed.
8M & L in repair for E-boards, ceiling 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet 3 mm thick double at web and single at flange and the flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x 5 mm powder coated for ceiling and the ceiling boards 60 cm X 60 cm X 4 mm thick, suspended with GI wire 2 mm dia and 2 m average length with adjustable hanging device complete including plugging in brick / stone walls with steel rawl plug @ 600 mm C/C and the ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper after preparation of surfaces including making good all the disturbed portion complete all as specified & directed.
9Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
10M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
11Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, and removing unseviceable materials out side MoD land etc complete all as specified and as directed.
12M&L for 15mm thick plastering on brick or concrete surface in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.
13M&L for 15mm thick plastering on brick or concrete surface in CM (1:6) surface finished even and fair complete all as specified and directed.
14M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
15M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacturer of paint complete all as specified and directed.
16M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of exterior anti fungal acrylic emulsion paint having three years of performance warranty) over a coat of exterior water based primer complete all as specified and as directed.
17M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacturer of paint complete all as specified and as directed.
18M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.
19M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.
20Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed.
21M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.
22M & L for plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) in copings,parapets, Kneelers, apex stone, bed plate, kerbs including slightly rounded or chamfered angles and throating complete all as specified and directed..
23S&F in repair 110 mm bore PVC (SWR) pipe single socketed , in any length with rubber ring joints laid in trenches / walls etc complete all as specified and directed.
24M&L precast ce ment concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns,posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers,weatherings, throat- ing etc. and setting in 1:4 mortar complete with joints to match complete all as specified and directed.
25Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
26M & L 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in levelling course to floor complete all as specified and directed.
27M&L coloured glazed ceramic tiles 450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as backing coat to receive wall tiles/skirting/dados complete all as specified and directed.
28M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed.
29M&L Vitrified Ceramic tiles double charge light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed.
30-Ditto all as per Item No 29 above but as in skirting, including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as backing coat to receive wall tiles/skirting/dados complete all as specified and directed .
31Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
32M & L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
33Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed
34Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed.
35Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed.
36Supply and fixing windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated (PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 90 Gsm/Sqm. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick in Double rebate windows in which both glazed shutter and flymesh shutter, 74 X 60mm outer frame , Mullion 72 x 49mm, Glazed shutter 48 x 22mm, Flymesh 41 x 22mm, Beading with round ends for Glass Fixing 12 x 12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner PolyViny lChloride brackets centre mullion fixed with PolyViny lChloride Mullion caps . Glass of 4mm thick plain float glass fitted with Ethylene Propylene Diamine Monomer in glazed shutter and wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Black Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of polyvinylchloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, PolyVinyl Chloride handle 1 in each and Powder coated Peg stay in Glass shutter.Window shall be provided with Powder coated MS Grill/Guard Bars made of 10mm MS Sq Bar welded to 6 x 12mm MS Flat with countersunk holes at both vertical ends . Gap between the bars should not be more than 150mm . Window frames shall be fixed to brick / concrete masonry by using nylon self expension caps & 75/100 mm MS screws after drilling in walls. VC Black Gypsum Drywall screws should be used while fixng corner brackets,stay,hinges,mullion caps of windows. complete all as specified and directed.
37S&F Factory made single extruded WPC (Wood polymer composite ) solid door /window /ceosetory windows & other Frames/ Chowkat size 65mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ),calcium carbonate and natural fibers ( wood powder /rice husk /wheat husk ) and non toxic additives (maximum toxicity index of 12mm for 100gms )fabricated with miter joints after applying PVC solvent cement and screwed with full body threated star headed SS screws having minimum framed density of 750kg/ cum,screw withdrawal strength of 2200N (Face) & 1100N (Edge) minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with being termite /borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast /lugs/SS dash fasteners of required dia and length complete as per direction of Engineer -in-charge .(MS hold fast /lugs or SS dash fasteners shall be paid separately).Note:- for WPC solid door /window frames ,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable .Variation in profile dimensions on plus side shall be acceptabel but no extra payment on this account shall be made complete all as specified and directed.
38S&F 30mm thick factory made single extrude WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60(suspension Grade ),calcium carbonate and natural fibers (wood powder /rice husk /wheat husk ) and non toxic additves (minimum toxicity index of 12 for 100gms ) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800N (Face & 900N (Edge),minimum compressive strength 50 N/mm2,modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof ,water /moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of appproved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.s screws, all as per direction of Engineer in Charge .
39S&F second class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
40S&F for 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.
41Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed.
42M& L for Steel windows or ventilators, fixed type, with glazing bars if any portion of ventilation requirement of glass to be provided by contractor complete all as specified and directed.
43M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
44S&F framed brackets of angle or tee with web and flanges cut to shape, drilled and counter sunk for screw including benching and welding angles as necessary gusset plate rivetting etc. confirming to Fe-290 Gde-E-165 complete all as specified and as directed.Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.
45S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed.
46S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed.
47S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.
48S & F 100mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified.
49S & F in repair stainless steel drapery rod 25 mm dia including stainless steel brackets including fixing arrangements with drilling holes etc complete of approved quality complete all as specified and directed.
50S&F Stainless steel wire cloth of size 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed..
51S&F 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet and cupboard shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed
52S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed
53S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back sides complete as per manufacturer’s specifications complete all as specified and directed
54S&F Auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in position complete all as specified and directed.
55S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.
56M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed.
57Taking up or down 15 or dia steel tubing complete all as specified and directed.
58Taking up or down 20 mm dia steel tubing complete all as specified and directed.
59Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
60Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
61M&L Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc complete all as specified and directed.
62S&F in repair Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed of bore of pipe 20mm bore complete all as specified and as directed.
63S & F in repairs vitreous china squatting pan \\"Orissa pattern\\" size 580X 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding etc complete all as specified and directed.
64S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed
65S&F for Stop valves, fancy type, chromium plated with long shank and cup (Angle valve type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed.
66S&F in repair Soap dish any type fixed to plugs with chromium plated brass screws size 130x80x120mm complete all as specified and directed
67S&F in repair 15mm fancy type Cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
68S&F in repair cromium plated Grating doom 100mm dia of CP (minimum weight 25 Gms) complete all as specified and directed
69S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed all as specified and as directed.
70S&F in repair for PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
71S&F in repair Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed.
72S & F in repairs 600 X 450 mm bevelled edge miror of selected guality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washe rcomplete all as specified and directed.
73S&F PVC waste coupling 32 mm bore with cup and washers complete and all as specified and directed.
74S&F PVC waste pipe 32mm bore with cup and washers complete on new or old locations complete all as specified and directed.
75S & F 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position a including 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod& high density plastic ball screwed for iron pipe and fixed including dismantling all as specified in SSR Part I complete all as specified and directed
76S&F in repair chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges , including brackets and fixed to walls complete all as spd and directed
77S&F in repair corner self fency type three tier with 5.50 mm thick glass mounted on cp brass frame fixed with brass screw & plug size 300- 450mm as suitable for bath room as per manufacturer instruction complete all as spd and directed
78S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and waste, inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe ,overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as spd and directed
79S&F in repair stainless steel plate rack (size 900x600x250 mm) of min thickness 0.80mm incl necessary drilling fixing with screw ,plugs in kitchen etc fixed in position complete in all respect as spd and directed .
80S&F in repair Toilet roll holder with flap, with accessories set complete all as specified and as directed.
81S & F in repair over head shower 150x150mm square shape single flow(ABS Body chrome plated with greay face plate)with Rubit cleaning system complete all as specified and as directed.
82S&F in repair CP brass wall mixer 15mm dia mark hot and cold complete all as spd and directed
83Dismantling of 110mm bore PVC pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed.
84Dismantling of 75mm bore PVC pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed.
85S&F 110 mm bore PVC (SWR) pipe single socketed , in any length with rubber ring joints laid in trenches in floors etc complete all as specified and directed.
86S&F 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber ring joints laid in trenches in floors etc complete all as specified and directed.
87S&f 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
88S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
89S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
90S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
91S&F in repair 110 mm PVC (SWR) vent cowl complete all as specified and directed.
92Demolition of reinforced cement concrete any description complete all as specified and directed.
93M&L Precast cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) as in manhole cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.
94Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.
95S & F for 1:2:4 type B-1 ( using 20 mm graded stone aggregate) cement concrete in surface channels and drains all as spd and directed
96Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed.
97Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense type of soil including removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point in soil complete all as specified and directed.
98M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spread and , levelling in layers not exceeding 15 cm thick each layer watered and well rammed to a true surface complete all as specified and directed.
99PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as fdn filling and mass concrete for post holes. complete all as specified and directed.
100M & L for chequered tiles 30cm x 30cm x25 mm thick, rubber finished, (ISI Marked) set jointed and pointed in neat cement slurry in floors with grey cement and pigment including screed bed 20mm thick in CM 1:6 complete all as specified and directed.
101M&L 75mm thick for PCC 1:3:6 type C-2 using 40 mm graded stone agg as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed
102Dismantling of wrought iron or mild steel work of any description work not otherwise provided for,complete all as specified and directed
103S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410 W(Gde -250) quality -B complete all as specified and directed.
104S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
105M & L for preparation of new steel or iron surface and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer over 10 cm width or girth complete all as specified and directed
106Dismantling post struts (wood, steel or RCC) any description incl taking out embeded portion & making good disturbed ground ,post embeded in concrete /masonery etc complete all as specified and directed
107Excavation in post holes in hard dense soil (or similar holes) each n exc 0.5 cum,getting out,returning,filling in and ramminjg earth or broken rubble mixed with earth around,in layers not exceeding 25cm,watering,and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
108M&L for PCC (1:2:4) type B2 (using 40mm graded stone agg) as in mass concrete for embedding of post complete all as specified and directed.
109Dismantling fencing wire mesh any type complete all as specified and directed
110S & F Joist, channel, angle, tee/flat or other sections, including cutting tops to shapes as directed drilling holes ,notching for wire etc and similar work conforming to Fe 290 Gde-E-165 etc complete all as specified and directed.
111Fixing only Chain link fencing in patch incl line wires any mesh size and any type of standard rail ,staining bolts etc incl provn of binding wire complete all as specified and directed.
112Supply only Chain link MS glavanised fencing any size or type as required at site complete all as specified and directed.
113S&F to Fe-410-W (Gde.E-250 quality-A or Fe 290 (Gde - E-165) 10 mm dia and over mild steel round bar for line wire of Chain link fencing complete all as specified and directed.
114S & F mild steel screw bolts (machine made) 5 to 10mm dia and length of bolt exceeding exc 5cm but n exc 10 cm long with hexagonal or square head at one end and other end screwed or both end screwed, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.
115S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with complete fixing accessories complete all as specified and directed.
116S&F stainless steel (304 grade of steel ) for making steel railing/racks/ guard bars of any size in kicthen of any thickness made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts of required size including fabrication and fixing in wall/floor etc complete all as specified and directed.
117S&F Bands, straps, supports or stays for valley gutter,rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
118Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed.
119Taking down carefully TPN DB/ MCB DB complete, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed.
120Taking down carefully Copper/ aluminium sub main wiring complete, including fixture such as conduit etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc. all as specified and directed.
121Material & Labour for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with continuous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed rigid PVC conduit(ISI marked) ,duly cutting chases & concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) including metal flush box made of GI sheet and white cover with making good the disturbs surfaces of wall/floor/ceiling complete all as specified and directed for the following.Note: Flush box and cover plate should be of same make all as approved for switches/sockets.
122One light/fan/bell point controlled by one No modular type switch 6 Amps single pole one way
123One 3 pin 6 Amps socket outlet on same board controlled by one, one way 6 Amps modular switch.
124One socket outlet 5/3 pin 6 Amps controlled by one modular switch on independent board.
125All as per item No 121here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLSH but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLSH cable as earthwire.
126S & F switch Modular single pole, one way 6 Amps , 1 module, 230 volts, 50 hz complete all as specified and directed.
127Supply and fix Modular switch 1 way 16 Amps, 1 module, 230 volts, 50 Hz complete all as specified and directed.
128Supply and fix Modular Socket outlet, 6A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified and directed.
129Supply and fix Modular Socket outlet, 16A - 2/3 pin combined, 2 module ISI marked, 230 volts, 50 hz complete all as specified and directed.
130S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as speccified and directed
131S&F 10 Watt LED aluminum Bulkhead surface mounted with opaque aluminum diffuser for optimum light output IP65 environmental friendly, Voltage range-120V-280V AC,power factor>0.90 system complete including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ all as specifified & directed.
132S & F LED Bulb 10 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for \\"B-22 type to fix on batten holder complete all as specified and directed.
133Supply & fixing fancy lamp holder, insulated body ISI marked with back plate for batten fitting complete all as specified & directed
134S&F bell ding dong elelctric 230V AC single pole complete all as specified and directed
135S & F bell push Modular single pole, one way 6 Amps , 1 module, ISI marked, 230 volts, 50 hz complete all as specified and directed.
136S&F MCB DB SPN 8 way, 240 volts in sheet steel enclosure, double door type complete all as specified and directed.
137S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.
138S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.
139Supply and fixing LED lights fitting 1 x20 watt 4 Ft, 220 V, AC including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
140Supply and fixing LED lights fitting mirror type with high output diffuser 02 Feet , 10 watt. 220 V and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
141Supply and fix LED building security light 1 x 20 W housing made out of pressure die-cast aluminium alloy with toughned glass, working on 240 volts, 50 Hz, consisting of reflecting lamps wired with appropriate driver including fixed on wall with 1.2 mtr 32 mm GI pipe bracket & 02 Nos MS clamp made out of F1 40 x 6 mm or as directed including connecting with 1.5 sqmm , 3 core, PVC insulated copper conductor cable 1100 Volt grade from ceiling box to light complete all as specified and as directed by Eng-in-Charge.
142Supply and fixing Steel body fresh air fan single phase 230volt of size 300mm complete with louvers including making hole and grouting of nut bolts etc and making good the disturbed surface of wall complete all as specified and directed. Note:- Old Exhaust Fans to be deposit at MES Store Yard.
143Supply and fixing PVC body fresh air fan single phase 230volt of size 250mm complete with louvers including making hole and grouting of nut bolts etc and making good the disturbed surface of wall complete all as specified and directed. Note:- Old Exhaust Fans to be deposit at MES Store Yard.
144Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 4mm GI Wire check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 15 mm dia light grade GI pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighing not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items.
145Supply and fix Water heater storage type water heater (Geyser) capacity 25 litres BEE 5 star rated including grouting the nut bolts - 04 Nos, PVC Connection Pipe - 02 Nos, Chromium plated Stop Cock 15mm - 02 Nos, bib tap- 01 Nos and necesssary GI pipe etc all complete all as specified and directed. Note:- Old Geyser deposit at MES Store Yard.
146S&F sub main wiring two single core 6 Sqmm PVC insulated, unsheathed, stranded copper conductor cable(FRLSH) 1100Volts grade drawn in & including rigid PVC Conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sqmm PVC insualted unsheathed copper conductor cable (FRLSH) as earth wire and wire connected with main earth dolly including cutting chases and making good disturbed portion complete all as specified and directed. Note : Two runs of phase and neutral wire and one run of earth wire and PVC conduit will be measured as one RM or one length.
147S&F sub main wiring two single core 4 Sqmm PVC insulated, unsheathed, stranded copper conductor cable(FRLSH) 1100Volts grade drawn in & including rigid PVC Conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sqmm PVC insualted unsheathed copper conductor cable (FRLSH) as earth wire and wire connected with main earth dolly including cutting chases and making good disturbed portion complete all as specified and directed. Note : Two runs of phase and neutral wire and one run of earth wire and PVC conduit will be measured as one RM or one length.
148S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed.
149Supply, fixing, laying, jointing & testing of galvanised iron water tubing 'medium grade' conforming to IS-1239 with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc as required complete fixed checknuts, caps, plugs etc as required complete fixed to walls and ceilings, laid in trenches/under floor/under road or floors for the 40 mm bore pipes complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58556619
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24.41 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Bldg No P-50 Evatt Line At Grrc Lansdowne
Basic Detail
Tender No 87366/LDN/E8
Bidding Type Tender
Location
City Pauri Garhwal
State Uttarakhand
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 15 Dec 2026
Finance
Tender Value 24.41 Lakhs
Tender Fee 500
EMD 48834
Exemption Available
Document List
37aeaaa1-67db-4a03-8853-8b0f56b1eabc.html
BOQ_896304.xls
Tender87366.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 24 days

Tender Documents

Download All (ZIP) ↓
html

37aeaaa1-67db-4a03-8853-8b0f56b1eabc.html

xls

BOQ_896304.xls

pdf

Tender87366.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender