Tender For Periodical Services To Otm/Md Accn And Repair To Decorative Ceiling, Wall Paneling And Other Misc Wks Of Guest Rooms Of Offrs Room At Dgre Under Age (I) R N D Manali.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
19 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Otm/Md Accn And Repair To Decorative Ceiling, Wall Paneling And Other Misc Wks Of Guest Rooms Of Offrs Room At Dgre Under Age (I) R N D Manali.
BOQ
| Sl. No. | Item Description |
| 1 | Dismentling unframed timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-Charge. |
| 2 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area exc 3 Sqcm and not Exc 6 Sqcm, but bullnosed, splayed,chamfered or rounded on one edge or face, complete all as specified and as directed by Engineer-in-Charge. |
| 3 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area exc 13 and not Exc 25 Sqcm, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M & L for preparing new or previously untreated of wooden and applying two coats of synthetic enamel paint over incl a coat of red oxide over 10 cm in width or girth, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling/Walls, complete all as specified and directed by Engr-in-Charge. Note:-( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition) |
| 6 | Dismantling wall and ceiling board,of any description and incl old batterens, complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Providing & fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process, complete all as specified and as directed by Engineer-in-Charge. |
| 8 | S & F hollow PVC panel joint type (with core, tongue) of 4 to 6 mm thick termite resistance, in approved colour golssy finish fixed with screws and incl battern for fame 300 to 500 C/C. Nails or adhesive on wooden/PVC /metal battens fixed on wall/ceiling and suitable fillets , complete all as specified and directed by Engr-in-Charge. |
| 9 | Dismantling 15 mm to 40 mm nominal bore G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead, complete all as specified and as directed by Engineer-in-Charge. |
| 10 | S&F in repairs 3 layer PP-R (Poly propylene Random copolymer) pipes of PN - 16 Pipe, 20mm OD (SDR-7.4) confirming to IS:15801 , UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints, concealed work, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | S&F in repairs 3 layer PP-R (Poly propylene Random copolymer) pipes of PN - 16 Pipe, 25mm OD (SDR-7.4) confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints, concealed work, complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed by Engineer-In- Charge |
| 13 | M&L in repairs 25 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate as in levelling course for flooring, complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15 mm thick screed bed in CM (1:6) on stone wall, complete all as specified and directed by Engineer-In- Charge.. |
| 15 | M&L for Glazed ceramic tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:3, complete all as specified and directed by Engineer-In- Charge. |
| 16 | Providing and fixing in repairs white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid, complete all as specified and directed by Engineer-In- Charge. |
| 17 | Providing and fixing in repairs wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer, complete all as specified and directed by Engineer-In- Charge. |
| 18 | M&L for abour for random rubble stone masonary, uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4) including demoltion and remove debries out of MOD land, complete all as specified and directed by Engineer-In- Charge. |
| 19 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, complete all as specified and directed by Engineer-In- Charge. |
| 20 | M&L rendering 15mm thick plaster on other than face fair face of brick work in CM 1:4 and surface finished even and fair, complete all as specified and directed by Engineer-In- Charge. |
| 21 | M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of stone masonary wall surfaces, complete all as specified and directed by Engineer-In- Charge. |
| 22 | M&L for two coats of oil bound distemper on walls on newly plastered surfaces over one mm thickness wall care putty including preparation of surfaces by brooming or by steel wire brushing, complete all as specified and directed by Engineer-In- Charge. |
| 23 | M&L for preparation of new plaster surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed by Engineer-In- Charge. |
| 24 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar parapets and railings, copings, kneelers, apex stones, bed plates, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required including in repair, complete all as specified and directed by Engineer-In- Charge. |
| 25 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge. |
| 26 | M&L for applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-In- Charge. |
| 27 | M&L for complete removal of existing treatment & preparation of old plastered surface of wall and applying two coats of Distemper oil emulsion, white or tinted on old wall surface, complete all as specified and directed by Engineer-in-Charge |
| 28 | M&L for preparation of old plastered surface of wall washing, rubbing down and stopping of distempered and painted surface and applying one coats of Distemper oil emulsion, complete all as specified and directed by Engineer-in-Charge |
| 29 | M&L for preparation of old plastered surface of ceiling washing, rubbing down and stopping of distempered and painted surface and applying one coats of Distemper oil emulsion, complete all as specified and directed by Engineer-in-Charge |
| 30 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-In- Charge. |
| 32 | M & L for washing, rubbing down and stopping of old cement base paint surfaces of walls incl cornics, pillastar and applying one coat of cement base paint on wall, complete all as specified and directed by Engineer-In- Charge. |
| 33 | M & L for complete removal of existing treatement from plastered surfaces finished even & smooth of old cement base paint surfaces of walls incl cornics, pillastar and applying two coat of cement base paint over a coat ofChalk whiting on wall, complete all as specified and directed by Engineer-In- Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender