Tender For Welcome Maintenance To Offrs Md/Otm Accns And Other Misc B/R Repair Works At Beg And Centre Under Age B/R-Ii In Ge(Central) Khadki.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance To Offrs Md/Otm Accns And Other Misc B/R Repair Works At Beg And Centre Under Age B/R-Ii In Ge(Central) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | NOTE FOR ALL PAINITNG ITEMS :-The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit.(ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.(iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item.(v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. |
| 2 | NOTE FOR PLUMBING AND SANITARY ITEMS:-(i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.(iii) make specified in BOQ will supersede to all. |
| 3 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 4 | Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J- type or cranked hook bolts complete all as specified and as directed. |
| 5 | Description all per item No 4 above but except AC sheet |
| 6 | Material and labour for asbestos cement two- piece adjustable plain wing ridge 6mm thick fixed with L-type or J- type or cranked hook bolts complete all as specified and as directed. |
| 7 | Dismantling of Plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 8 | Supply and fix for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 9 | Supply and fix for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed . |
| 10 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 11 | Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed. |
| 12 | Supply and fix steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed . |
| 13 | Material and labour preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed . |
| 14 | Dismantling of single layer Mangalore pattern or similar tiles in roof coverings |
| 15 | Supply and fix roof tiles, Mangalore pattern, inter locking at side joints laid dry complete all as specified and as directed. |
| 16 | Description all as per ser No 15 above except tiles |
| 17 | Supply and fixridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1 : 6 complete all as specified and as directed . |
| 18 | Dismantling battens for tiles singles etc of any size including tiling fillets spaced exc 15 cm complete all as specified and as directed . |
| 19 | Supply and fix second class hard wood clean sawn battens at 30 cm centre to centre and section area exceeding 15 and not exceeding 25 sqcm complete all as specified and as directed . |
| 20 | Description all as per item No 19 above but except battens |
| 21 | Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position. |
| 22 | Description all as per ser No 21 above but in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section. |
| 23 | Supply and fix for 2nd class soft wood timber framed and fixed clean sawn in scantling all as specified and as directed. |
| 24 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed. |
| 25 | Taking down steel tubing and connection 15mm bore. |
| 26 | Taking down steel tubing and connection 20mm bore. |
| 27 | Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed. |
| 28 | Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed. |
| 29 | Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed . |
| 30 | Supply and fix tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed . |
| 31 | Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete all as specified and as directed . |
| 32 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of white (lime) wash on wall complete all as specified and as directed. |
| 33 | Description all as specified in item No 32 above but applying one coat of white (Lime) wash on ceiling. |
| 34 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of cement based paint (any tint) on walls complete all as specified and as directed . |
| 35 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying two coat of cement based paint (any tint) on walls complete all as specified and as directed. |
| 36 | Material and labour for preparing of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed . |
| 37 | Material and labour for preparing of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and as directed . |
| 38 | Material and labour for preparing plastered or unplastered old surfaces of walls and applying one coat of plastic emulsion complete all as specified and as directed . |
| 39 | Complete removal of existing treatment and Material and labour for applying 1mm thick layer wall care putty and applying two coats of oil bound distemper on walls all as specified and as directed. |
| 40 | Wall care putty of 1mm thick as in interior on wall in layers surfaces of any description finished smooth and even surfces complete all as specified and as directed. |
| 41 | Material and labour for applying two coats damp proof course on affected interior wall surfaces by using Damp stop from Berger/Asian Damp proof/Nerolac perma No Damp using roller,including prepartion and cleaning existing wall surface,including brooming down/scrap down the surfaces using sand paper etc. complete all as specified and as directed.NOTE :-(i) Cracks of wall to be filled with its crack fill paste of make as per recommended by manufacturers instruction.(ii) Damp proof should be done by skilled labour and as per manufacturer's instructions. |
| 42 | Material and labour for applying two coats damp proof course on affected Exterior wall surfaces by using Damp protect from Nerolac /Dr Fixit raincoat select/ Damp Shealth by Asian using roller,including prepartion and cleaning existing wall surface,scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot etc by using jet. complete all as specified and as directed.NOTE :-(i) Cracks of wall to be filled with its crack fill paste of make as per recommended by manufacturers instruction.(ii) Damp proof should be done by skilled labour and as per manufacturer's instructions. |
| 43 | Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of oil bound distemper complete all as specified and directed |
| 44 | Dismantling of ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete. |
| 45 | Supply and fix interlocking GI snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc. complete all as specified and as directed. |
| 46 | Material and labour for 7-8 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling. complete all as specified and as directed. |
| 47 | Material and labour for providing and fixing 10mm thick Plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets,or metal frame work and reinforced with G.I. wire mesh (Fillets,metal frame work and G.I wire mesh paid seperately complete all as specified and as directed . |
| 48 | Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 49 | Material and labour for 9mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work and fixed in ceiling, flat or sloping complete all as specified and as directed . |
| 50 | Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level all as specified. |
| 51 | Material and labour 25mm thick PCC type B1 (1:2:4) 20 mm graded stone agg as in floor finished fair, even and smooth without using extra cement complete all as specified and as directed . |
| 52 | Material and labour 75mm thick PCC type C2 1:3:6( using 40mm graded aggregate) as in plinth protection complete all as specified and as directed . |
| 53 | Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410 x 330 x160mm complete all as specified and as directed. |
| 54 | Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed. |
| 55 | Material and labour for Granite slab machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required complete all as specified and as directed . |
| 56 | Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including Material and labour for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed . |
| 57 | Material and labour for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed . |
| 58 | Description all as per ser No 57 abovebut on step riser skirting over and including 10mm thick rendering in CM (1:4) complete. |
| 59 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations. |
| 60 | Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete |
| 61 | Material and labour for Double charged ceramic vitrified coloured tiles 10 mm thick light shade, (square / rectangular) polished, area of each tiles exceeding 0.42 Sqm and n. exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed . |
| 62 | Material and labour for Double charged ceramic vitrified coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed . |
| 63 | Material and labour for ceramic coloured tiles 10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed . |
| 64 | Material and labour for Ceramic coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed . |
| 65 | Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar complete all as specified and as directed. |
| 66 | Material and labour for Glazed ceramic coloured tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. |
| 67 | Supply and fixin repairs Aluminium body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed . |
| 68 | Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section comprising of outer frame 50mmx25mm with minimum wall thickness of 1.30mm,louver carrier sections of size 25mmx18mm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators/old steel ventilator complete all as specified and as directed . |
| 69 | Demolition of precast concrete block /brick work walling built in cement mortar |
| 70 | Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and as directed. |
| 71 | Material and labour for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed. |
| 72 | Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 73 | Material and labour preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and as directed |
| 74 | Material and labour for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) all as specified and as directed. |
| 75 | Material and labour preparation of newly plastered surface and applying two coat of oil bound Distemper over a coat of primer including putty on wall etc complete all as specified and as directed. |
| 76 | Supply and fix in repairs Wall mixer, three in one, brass chromium plated, with complete accessories all as per makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed. |
| 77 | Supply and fix in repair Bib taps 15mm dia, cast copper alloy chromium plated, with CP flange Tranquil series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed. |
| 78 | Supply and fix in repair Bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 79 | Supply and fix in repair Looking mirror of 600x450mm beveled edge of selected quality glass fixed to plugs with chromium plated brass screws complete all as specified and directed |
| 80 | Supply and fix in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 81 | Supply and fix in repairs Stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 82 | Supply and fix in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per makes specified in PS. complete including making good to floor fixed in repairs all as specified and asdirected. |
| 83 | Supply and fix in repairs Brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 84 | Supply and fix in repairs Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 85 | Supply and fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per makes specified in PS fixed as in repairs, complete all as specified. |
| 86 | Supply and fix in repairs Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and as directed. |
| 87 | Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 88 | Supply and fix in repairs Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per makes specified in PS complete fixed in repairs all as specified and directed. |
| 89 | Supply and fix in repairs PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs all as directed. |
| 90 | Supply and fix in repairs 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PS fixed in repairs complete all as specified and as directed. |
| 91 | Supply and fix in repair for CP Health Faucet ABS Body with 1 Meter Flexible tube & Hook complete all as specified and as directed |
| 92 | Supply and fix in repairs PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed. |
| 93 | Supply and fix in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed. |
| 94 | Supply and fix in repairs Tubular towel rail, 20mm dia, 60 cm long complete all as specified and as directed. |
| 95 | Supply and fix in repair rotational moulded polyethylene water storage tanks triple layered capacity 500 lit ( cylindrical vertical with closed top ) hoisted and fixed in position with embossment of ISI mark including dismantling and removing of old tank complete all as specified and as directed. |
| 96 | Supply and fix in repair rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position with embossment of ISI mark including dismantling and removing of old tank all as specified and as directed. |
| 97 | Supply and fixed in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mmdia of the pipe complete all as specified and as directed. |
| 98 | Supply and fix in repairs fancy type SS curtain rod powder coated 20mm dia with wall thickness not less than 1mm ( of approved colour and design) including bracket (latto) and wall face support bracket fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete all as specified and as directed. |
| 99 | Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and as directed |
| 100 | Taking down chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each all as specified and as directed. |
| 101 | Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site all as specified and as directed. |
| 102 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II. complete all as specified and as directed. |
| 103 | Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. |
| 104 | Supply and fix factory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 105 | Supply and fix35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plainchamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed. |
| 106 | Supply and fix 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 107 | Supply and fix for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed . |
| 108 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth all as specified and as directed . |
| 109 | Material and labour for Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as specified and as directed |
| 110 | Stainless steel 100 mm size butt hinges, medium weight complete all as specified and as directed. |
| 111 | Aluminium handles 150 mm long, cast type anodised complete all as specified and as directed. |
| 112 | Aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed. |
| 113 | Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long all as specified and as directed |
| 114 | Supply and fix flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in holdfasts all as specified and as directed . |
| 115 | Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one gauzed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick plain sheet glass and minimum 1.2 mm wall thickness including shutters,interlocks,EPDM gaskets with necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonary wall complete including dismantling of old window of any type complete all as specified and directed by Engr-In-Charge.Frame Section as below:-Bottom member (21446) : 91x31.75mmSide & Top (21447) : 91x31.75mm |
| 116 | Supply and fixfor frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 117 | Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below:Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete. Chowkhat Frame : 101.60x44.45x1.60 mm Shutter verticle/stile: 85.00x44.45x1.60 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm |
| 118 | Supply and fix in repair 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed. |
| 119 | Supply and fix in repair 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed. |
| 120 | Supply and fix in repair PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed. |
| 121 | Supply and fix in repair PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed. |
| 122 | Supply and fix in repair 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed. |
| 123 | Supply and fix in repair 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed. |
| 124 | Supply and fix in repair 110mm bore PVC (SWR) WC connector type 'B' any type fixed in repairs complete all as specified and as directed. |
| 125 | Supply and fix in repair PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed. |
| 126 | Supply and fix in repair 100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) fixed in repairs complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender