Tender For Repair/Maint Of Water Mains & Distribution Pipeline, Valves And Cleaning Of Ug Sump & Oh Tank At Raspunja And Repair/Maint Of External Water Supply Pipelines, Valves And Cleaning Of Reservoirs At Od And Sahapore Area Under Ge (C) Kolkata
Tender Overview
Project Description
Tender for Repair/Maint Of Water Mains & Distribution Pipeline, Valves And Cleaning Of Ug Sump & Oh Tank At Raspunja And Repair/Maint Of External Water Supply Pipelines, Valves And Cleaning Of Reservoirs At Od And Sahapore Area Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA NAME OF WORK :- REPAIR/MAINT OF WATER MAINS & DISTRIBUTION PIPELINE, VALVES AND CLEANING OF UG SUMP & OH TANK AT RASPUNJA AND REPAIR/MAINT OF EXTERNAL WATER SUPPLY PIPELINES, VALVES AND CLEANING OF RESERVOIRS AT OD AND SAHAPORE AREA UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 (8998) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches n.exc 1.5 mtr wide and not excedding 1.5 mtr in depth for laying GI/CI pipes and gettings insoft /loose soil complete all as specified and directed. |
| 3 | Returning filling including spreading levelling watering and well ramming inlayers not exceeding 25cm complete all as specified and directed. |
| 4 | Removal of excavated soil to a distance not exc 50 metre away from starting point where directed at a level not exc 1.5m above the starting point. |
| 5 | Taking out existing pipe line of any type from trenches, walls, floors etc including cleaning for refixing or removal of unserviceable pipe from site all as directed for following bores :- |
| 6 | 150mm Bore |
| 7 | 100mm bore |
| 8 | 80mm bore |
| 9 | 50mm bore |
| 10 | 40mm bore |
| 11 | 25mm bore |
| 12 | 20mm bore |
| 13 | Supply & laying GI tubing medium grade galvanised with all fittings (union, elbow, socket, flanges with nut bolts & gasket) laid in trenches complete all as specifed and as directed for the following bores :- |
| 14 | 150mm Bore |
| 15 | 100mm bore |
| 16 | 80mm bore |
| 17 | 50mm bore |
| 18 | 40mm bore |
| 19 | 25mm bore |
| 20 | 20mm bore |
| 21 | All as per item No. 5 but fixed to wall/Ceiling or laid on floor with all fitting (union, elbow, socket, flanges with nut bolts & gasket) using necessary arrangement for scaffolding upto building of 12 storey height any type complete all :- |
| 22 | 80mm bore |
| 23 | 50mm bore |
| 24 | 40mm bore |
| 25 | 25mm bore |
| 26 | 20mm bore |
| 27 | M & L for re-fixing of old steel tubing obtained from item no 4 and connection in new or old position with all new fittings complete all as specified and directed for following bores:- |
| 28 | 100 mm bore size |
| 29 | 80 mm bore size |
| 30 | 50 mm bore size |
| 31 | 40mm bore size |
| 32 | 25 mm bore size |
| 33 | 20mm bore size |
| 34 | Supply , laying & jointing in trenches ductile iron 150mm dia pipe K-7, ISI marked of standard length with internal cement motor coating & external surface with bituminous paint spigot and socketed end, push type joint including rubber gasket as jointing material including taking out u/s one complete all as specified and directed |
| 35 | All as per item No. 8 here in before but for 100 mm bore |
| 36 | M/L for fixing in repairs CI specials such as Cast Iron bends (any type, radius and angle), tapers (any type I.e straight, bend, increasing or decresing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross, collar, caps, connecting pieces up to 150 mm dia |
| 37 | M & L Lead wool joints suitable for spigot & socketed CI Pipes and caulking the joints properly for avoiding leakage etc for the following sizes as directed :- |
| 38 | 150 mm bore size |
| 39 | 100 mm bore size |
| 40 | 80 mm bore size |
| 41 | S & F in repair Cast iron detachable joint (CID) with all accessoires suitable for the following sizes of pipes:- |
| 42 | 150 mm bore size |
| 43 | 100 mm bore size |
| 44 | 80 mm bore size |
| 45 | Supplying and laying of CPVC pipe of 25mm bore (32 mm OD) size SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/ trenches with all fitting (union, elbow, socket) complete all as specified :- |
| 46 | All as per item No. 13.00 here in before but for 20 mm bore (25 mm OD) |
| 47 | S&F CI sluice valve (class PN 1.6) 150mm bore ISI market with SS spindle both ends flanged iron wheel with necessary size of gaskets nuts, both washer etc including taking down the unserviceable complete all as specifed & directed. |
| 48 | All as per item No. 15.00 here in before but for 100mm bore |
| 49 | All as per item No. 15.00 here in before but for 80 mm bore |
| 50 | M & L for welding of broken pipe / flanges etc by cleaning the rust,dust and preperation of surface for welding including dismantling the existing and refixing again after repair complete all as specified and directed. |
| 51 | S&F gun metal gate valve screwed both ends for iron pipes with ironwheel (ISI marked) including taking down the unserviceable complete all as specified and directed |
| 52 | 80mm bore |
| 53 | 50mm bore |
| 54 | 40mm Bore |
| 55 | 25mm bore |
| 56 | 20mm bore |
| 57 | M & L Cutting drilling & tapping of existing CI/DI pipe line by necessary tools with out damaging the pipe line as required upto 150mm dia complete all as specified. |
| 58 | M & L for opening stuffing box of sluice valve and S&F new Stainless steel spindle with check nut fabricated out of superior quality all as per sample and as required at site including replacement of unserviciable rubber gasket, bolts, nuts & washers suitable for following size of sluice valves:- |
| 59 | 150mm bore |
| 60 | 100mm bore |
| 61 | 80mm Bore |
| 62 | M&L for cleaning and sterilization of under ground sump or service tank of capacity 100000 gallon through bactrological treatment and ultra violet ray in following stages including writing the date of cleaning complete all as specified and directed(a) To drain out the water by using exit valve or our own high capacity dewatering system.(b) Cleaning all the algae formation inside the tank using wire brush, scrubbing the walls, floor of the tanks.(c) Fresh water cleaning by high speed jet pump and draining out all the mud from the tank and cleaning of the floor thoroughly with clean water to obtain clean surface. |
| 63 | All as per item No 22.00 here-in- before but under ground sump of capacity 25000 gallons |
| 64 | All as per item No 22.00 here-in- before but under ground sump of capacity 10000 gallons |
| 65 | All as per item No 22.00 here-in- before but under ground sump of capacity 50000 gallons |
| 66 | All as per item No 22.00 here-in- before but overhead tank 50000 Gallons capacity |
| 67 | Supply only Calcium based High strength Chlorination chemical, Make - Purichlor/Altoc contains chlorine contents not less than 65% for water Disinfection complete all as specifed & as Directed. |
| 68 | M & L for paintig the external surface of existing pipeline surfaces of any description, n.exc 10cm in width or girth upto 250mm bore by scrapping the surface, applying red oxide primer & 2 coats of synthetic enamel paint with approved colour complete all as specified and directed. |
| 69 | M & Labour only for attending emergency external water supply compliants of all nature i.e. leakage in any type of water supply pipe lines, fittings / Fixtures, no water supply involving replacement of fittings like tee, elbow, socket union, etc .from 0600 hrs to 2200 hrs complete all as directed.(Any major material required for attending complaints shall be measured & paid separately under respective items hereinafter) |
| 70 | M&L for construction of valve pit chamber of size 2100 X 1400 X 900mm internal dimention using sub class-'B' bricks (1:6) plastering in cement mortar (1:4) externally & internally extended to 15CM below ground level incl PCC bed 10 cm in PCC 1:3:6 type C2 with MS frame fabricated by angle of size 50x40x6mm complete with top cover of 3mm MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer and cement surface with cement based paint. including demolition of damaged valve pit all as specifed & directed. |
| 71 | M&L for construction of valve pit chamber of sizse 1050x1050x900mm internal dimention using sub class-'B' bricks (1:6) plastering in cement mortar (1:4) externally & internally extended to 15CM below ground level incl pcc bed 10 cm in PCC 1:3:6 type C2 with MS frame fabricated by angle of size 50x40x6mm complete with top cover of 3mm ms sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer and cement surface with cement based paint. including demolition of damaged valve pit all as specifed & directed. |
| 72 | M&L for construction of valve pit chamber of sizse 900x900x900mm internal dimention using sub class-'B' bricks (1:6) plastering in cement mortar (1:4) externally & internally extended to 15CM below ground level incl pcc bed 10 cm in PCC 1:3:6 type C2 with MS frame fabricated by angle of size 50x40x6mm complete with top cover of 3mm ms sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer and cement surface with cement based paint. including demolition of damaged valve pit all as specifed & directed. |
| 73 | M & L Repair of valve chamber by cleaning and removing small bushes inside and surrounding the valve chamber and necessary brick works, plastering in cement mortar 1:4, painting with cement based paint of 2 coats inside and out side including dismantling of unserviceable MS sheet cover, S & F new MS sheet cover of 3.00mm thick with 2 coats of synthetic enamel paint over a coat of red oxide to steel surface and locking arrangements, including necessary welding upto 90cmx 90cm x 90 cm (internal dimension) all as directed. |
| 74 | M & L for painting of valve chamber of any size with two coats of cement based paint inside and outside of chamber and chamber cover with two coats of synthetic enamel paint over one coat of red oxide primer including replacement of rusted / damaged metal hinges / locking by welding with valve chamber frame and removing small bushes and grass inside & outside of valve chamber all as specified and directed |
| 75 | M&L Painting to UG sump manhole cover with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces etc all as specified and directed |
| 76 | Taking sample of raw water/tap water from Pump Houses & getting tested by Deirectorate of PHED office or NABL by collection of sample from Pump House for physical, Chemical and Bacterelogical analysis. Report shall be submitted to engr-in-charge.Note : One sample with all above test result shall be measured as one Job. |
| 77 | M & L for top cover valve pit chamber made of MS sheet & locking arrangement and painting with two coats of synthetic enamel over a coat of red oxide primer including removal of rusted damaged top cover all as specifed & directed with MS frame fabricated by angle iron of suitable size complete all as specified and directed. |
| 78 | M & L providing cement concrete type C1 (1:3:6) using 20mm graded stone aggregate as in roof kerbs or mud stops, base for valve pit, making good the road cutting and like, rounded or chamfered on edges all as specified and directed |
| 79 | M & L rendering 10 mm thick plaster in CM 1:6 on brick work or concrete surface, finished even & smooth without using extra cement all as specified and directed. |
| 80 | M &L brick work with burnt bricks best quality locally available bricks old size laid staright or curved on plan to any radius built in cement mortar 1:4 complete all as directed including dismantling old complete all as specified and directed. |
| 81 | S & F in repairs wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staples of size 12 mm for covering UG sump air vent as specified and directed |
| 82 | M&L for Boring of holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary machine complete all as specified and directed. |
| 83 | S & F HDPE pipe of 100mm (dia inner (PN-10) working pressure) for water supply complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender