Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58556585

Tender For Welcome Maintenance To Offrs Md Accn And Other Servíces To Jco/Ors Md Accn And Misc B/R Repair Inc Joinery, Tiling, Roofing, Flooring, Ceiling, Plumbing, Sanitary Fitting, Brick/Block Masonary Wall And Misc Br Repaír At Tb-Ii Under Age B/R

Issued by Statutory Bodies & Commissions/Committees · Pune, Maharashtra
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Dec 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Welcome Maintenance To Offrs Md Accn And Other Servíces To Jco/Ors Md Accn And Misc B/R Repair Inc Joinery, Tiling, Roofing, Flooring, Ceiling, Plumbing, Sanitary Fitting, Brick/Block Masonary Wall And Misc Br Repaír At Tb-Ii Under Age B/R-Ii In Ge (C) Khadki.

BOQ

Name of Work:- WELCOME MAINTENANCE TO OFFRS MD ACCN AND OTHER SERVÍCES TO JCO/ORs MD ACCN AND MISC B/R REPAIR INC JOINERY, TILING, ROOFING, FLOORING, CEILING, PLUMBING, SANITARY FITTING, BRICK/BLOCK MASONARY WALL AND MISC BR REPAÍR AT TB-II UNDER AGE B/R-II IN GE (C) KHADKI.
Sl. No. Item Description
1NOTE FOR ALL PAINITNG ITEMS :-The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit.(ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.(iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item.(v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.
2NOTE FOR PLUMBING AND SANITARY ITEMS:-(i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.(iii) make specified in BOQ will supersede to all.
3Dismantling of Plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
4Supply and fix for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.
5Supply and fix for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.
6Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B all as specified and as directed.
7Supply and fix steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed.
8Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.
9Material and labour preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
10Preparing old plastered or unplastered surfaces of walls including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts, trading oil, greasy spot and applying two coat of white wash on ceiling complete all as specified and as directed.
11Preparation of old plasterd or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed.
12Preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
13Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
14Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying two coat of oil bound distemper complete all as specified and as directed.
15Material and labour for providing and applying 1 mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth.
16Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of oil bound distemper complete all as specified and as directed.
17Supply and fix sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410 x 330 x 160mm complete all as specified and as directed.
18Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed.
19Material and labour for Granite slab machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required all as specified and as directed.
20Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including Material and labour for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
21Material and labour for kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
22Description all as per ser No 21 above but on step riser skirting over and including 10mm thick rendering in CM (1:4) .
23Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.
24Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed.
25Material and labour for vitrified ceramic tiles 7-9 mm thick light shade, (square/rectangular) polished, area of each tiles exc 0.18 & n. exc 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
26Material and labour for vitrified coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed.
27Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
28Description all as per item no.27 above but as in skirting over, including 10mm thick plaster in CM(1:4)
29Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar complete all as specified and as directed.
30Material and labour for glazed ceramic coloured tiles in vertical surface 450 X350X7/300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed.
31Taking down chowkhats but with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each etc complete all as specified and as directed.
32Description all as item No 31 above but n.exc. 1.50 sqm each
33Taking down shutters of any description exc. 1.0 sqm and not exc. 2.0 sqm each complete all as specified.
34Supply and fix Anodised aluminium door shutters, aluminium section weighing more than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.NOTE :- The item include Glass, particle board, SS Wire cloth 0.36 nominal dia.Chowkhat Frame : 63.50x38.00x0.80 mm Shutter verticle/stile: 47.50x44.50x1.1 mm Shutter middle rail : 49.90x44.45x1.00 mm Shutter top : 47.50x44.45x1.00 mm Shutter bottom rail : 114.5.50x44.45x1.10 mm
35Supply and fix in repairs Aluminium excruded section body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.
36Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one gauzed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick plain sheet glass and minimum 1.2 mm wall thickness including shutters, interlocks, EPDM gaskets with necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonary wall complete including dismantling of old window of any type complete all as specified and directed by Engr-In-Charge.Frame Section as below:-Bottom member (21446) : 91x31.75mmSide & Top (21447) : 91x31.75mm
37Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section comprising of outer frame 50mmx25mm with minimum wall thickness of 1.30mm, louver carrier sections of size 25mmx18mm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and fixed to stone masonry wall complete all as specified and as directed.
38Supply and fix 2 nd class hard wood (haldu/ hallock) plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.
39Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but n. exc.two bricks &making good dismantled portion in cement mortar or cement lime mortar and stone walls built in lime mortar as required complete all as specified and as directed.
40Supply and fix mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and as directed.
41Supply and fixing PVC door frame (50x47) mm made out of plain colour 5mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing all as specified and as directed.
42Supply and fix Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
43Supply and fix factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood complete all as specified and as directed.
44Supply and fix flush shutter solid core 30 mm thick with block board core & ply wood face panels commercial type on both sides complete all as specified and as directed.
45Supply and fix factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed.
46Supply and fix in repairs pre-laminated particle board 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti incl dismantling complete all as specified and as directed.
47Supply and fix continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified and as directed.
48Supply and fix ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and as directed.
49Supply and fix extruded aluminium alloy handles, 100 mm long fabricated type., anodised complete all as specified and as directed.
50Supply and fix in repairs butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed.
51Supply and fix 150mm long Aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
52Supply and fix for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed.
53Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed.
54Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.
55Supply and fix as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.
56Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples complete all as specified and as directed.
57Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide (wall) with chromium plated bracket guard and with CP aluminium railing complete all as specified and as directed.
58Supply and fix in repair bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per specified in PS complete all as specified and as directed.
59Supply and fix in repair bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per makes specified in PS complete all as specified and as directed.
60Supply and fix in repair towel rail 600 mm long of fixed with and including chromium plated brass screw and wooden / plastics cleats complete all as specified and as directed.
61Supply and fix in repairs soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repair complete all as specified and as directed.
62Supply and fix in repair stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per makes specified in PS and as directed.
63Supply and fix in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per makes specified in PS complete including making good to floor all as specified and as directed.
64Supply and fix in repair brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as per makes specified in PS complete all as specified and as directed.
65Supply and fix in repair gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
66Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per makes specified in PS complete all as specified and as directed.
67Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per makes specified in PS complete all as specified and as directed.
68Supply and fix in repair vitreous china wash basin white flat back size 550x400 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per makes specified in PS complete all as specified and as directed.
69Supply and fix in repair PVC connections 15 mm size with PTMT nut of length 450 mm complete all as specified and as directed.
70Supply and fix in repair 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PS complete all as specified and as directed.
71Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.
72PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.
73Supply and fix in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.
74Supply and fix Fancy type (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.
75Supply and fix in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.
76Supply and fix fancy type SS curtain rod powder coated 20mm dia with wall thickness not less than 1mm ( of approved colour and design) including bracket (latto) and wall face support bracket fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as specified and as directed
77Supply and fix 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.
78Supply and fix 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.
79Supply and fix PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and as directed.
80Supply and fix PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and as directed.
81Supply and fix 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.
82Supply and fix 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.
83Supply and fix 110mm bore PVC (SWR) WC connector type 'B' any type fixed in repairs complete all as specified and as directed.
84Supply and fix PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.
85Supply and fix 100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) PVC (SWR) fixed in repairs complete all as specified and as directed.
86Taking down steel tubing and connection 15mm bore.
87Taking down steel tubing and connection 20mm bore.
88Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
89Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
90Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.
91Supply and fix tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.
92Dismantling of wall and ceiling boards (fibre, pulp insulation, Ac etc), any thickness including cover fillets complete.
93Supply and fix interlocking GI Powder coated snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm & it also including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level adjusters and screws etc complete all as specified and as directed.
94Material and labour for 7-8 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58556585
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 40 Lakhs
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Welcome Maintenance To Offrs Md Accn And Other Servíces To Jco/Ors Md Accn And Misc B/R Repair Inc Joinery, Tiling, Roofing, Flooring, Ceiling, Plumbing, Sanitary Fitting, Brick/Block Masonary Wall And Misc Br Repaír At Tb-Ii Under Age B/R-Ii In Ge (C) Khadki.
Basic Detail
Tender No 8496/E8 OF 2026-2027
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 16 Nov 2026
Submission Date 08 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 40 Lakhs
Tender Fee 500
EMD 80000
Exemption Available
Document List
8496Tender.pdf
BOQ_896340.xls
d4a9167a-a6c9-4d75-99da-0c95837e5bb9.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
pdf

8496Tender.pdf

xls

BOQ_896340.xls

html

d4a9167a-a6c9-4d75-99da-0c95837e5bb9.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender