Defence Statutory Bodies & Commissions/Committees Closing in 22 days TDR #58556578

Tender For Special Repairs Roof Treatment Of Bldg No. P-112 To P-120 Of Dbn Vihar Under Ge (East) Jalandhar Cantt.

Issued by Statutory Bodies & Commissions/Committees · Jalandhar, Punjab
Tender Value
1.07 Crore
Estimated cost
Bid Submission
14 Dec 2026
22 days left
EMD
1.86 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs Roof Treatment Of Bldg No. P-112 To P-120 Of Dbn Vihar Under Ge (East) Jalandhar Cantt.

BOQ

Name of Work:- Special repairs roof treatment of bldg No. P-112 to P-120 of DBN Vihar under GE (east) Jalandhar cantt.
Sl. No. Item Description
1Dismantling of brick tiles single layer as in roof covering complete all as specified & directed.
2Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof), complete, all as specified & directed.
3M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges, including necessary formwork wherever required, complete, all as specified & directed.
4M&L for Cutting out cracks to V-section in existing RCC roof slabs or terracing, cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed
5M&L for 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc, complete, all as specified and directed
6Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in ‘V’ groove filled with repairs mortar/micro concrete / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight, complete, all as directed.
7Supply and applying high build waterproofing system based on pure hydrophobic polyurethane, cold applied by spray/brush, forming a seamless elastomeric membrane. The membrane shall have minimum elongation of 280% and tensile strength of 2.7 N/mm² as per ASTM D 2370, crack-bridging ability of minimum 3 mm, and shall withstand water pressure up to 5 bar without leakage as per DIN 1048. The solid content shall not be less than 88%. The system shall include surface preparation, application of suitable epoxy primer as per manufacturer’s recommendation, and application of pure polyurethane coating in two coats with fibre-mesh reinforcement, with a minimum total consumption of 1.25 kg/m². Application shall be carried out by an authorised applicator of the membrane manufacturer using Graco make airless spray equipment or equivalent.
8M&L for GI water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing complete all as specified & directed
9M&L for GI water tubing 20 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing, complete all as specified & directed.
10S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete, all as specified & directed.
11S&F 500 litre rotational moulded polythylene water storage tank (Cylindrical vertical with closed top), triple layered, ISI marked, hosted and fixed in position including dismantling of existing tank of any description complete all as specified & directed.
12S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms.)
13Demolition and braking up drain pipes AC/PVC pipe, not exc 150 mm dia including all fittings.
14S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls.
15S&F PVC (SWR) bends 110 mm.
16Demolition of brick work built in cement mortar including all quoins, arches pillars etc but excluding precast concrete articles, complete, all as directed.
17M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6), complete all as specified & directed.
18Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus spoil out of Defence Land where directed at a level not exc 1.5 m above the starting point, complete all as directed.
19M&L for 15mm thick cement plaster in cement mortar 1:4 on external brick or concrete surface, finished even and fair, complete all as specified & directed.
20M&L for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint over a coat of primer, complete all as specified & directed.
21M&L for complete removal of the existing treatment on walls for preparation of wall surfaces by scrapping (any No of layers), rubbing down, washing, etc as directed and apply two coats of cement base paint, complete, all as specified and directed.
22M&L for complete removal of the existing treatment from walls for preparation of wall surfaces by scrapping (any No of layers), rubbing down, washing, etc as directed and apply a uniform layer of wall care putty as approved after that let the surface dry then apply two coats of oil bound distemper white or tinted over a coat of primer, complete, all as specified and directed.
23M&L for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coats of white (lime) wash on celling complete all as specified and directed.
24Dismantling structural steel works as in grills, doors, gates etc., all as directed.
25Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, Fe 410-W (Gde-E- 250) quality-A complete all as specified and as required.
26Supply and fixing in repair 2 mm thick fiber glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall up to 8 meter height complete all as specified and directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58556578
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.07 Crore
LAST DATE 14-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs Roof Treatment Of Bldg No. P-112 To P-120 Of Dbn Vihar Under Ge (East) Jalandhar Cantt.
Basic Detail
Tender No 8326/73/E8
Bidding Type Tender
Location
City Jalandhar
State Punjab
Key Dates
Publish Date 16 Nov 2026
Submission Date 14 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 1.07 Crore
Tender Fee 1000
EMD 1.86 Lakhs
Exemption Available
Document List
5f7a89e1-bf43-49b4-a350-57d2879791bd.html
BOQ_896293.xls
Tender73.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 14, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 24 days

Tender Documents

Download All (ZIP) ↓
html

5f7a89e1-bf43-49b4-a350-57d2879791bd.html

xls

BOQ_896293.xls

pdf

Tender73.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender