Tender For Special Repair To Sncos Living In Accn (Gharonda) Under Age (B/R-I) Adm Area At Af Station Agra
Tender Value
63.49 Lakhs
Estimated cost
Bid Submission
15 Dec 2026
23 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Sncos Living In Accn (Gharonda) Under Age (B/R-I) Adm Area At Af Station Agra
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone or concrete surfaces of wall etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complet all as specified and directed. |
| 3 | M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface should be even and smooth including liquid WPC @ 200 ml per bag of cement complete. |
| 4 | M&L for rendering 5mm thick on concrete surfaces of ceiling with CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture including three coat of white wash complete all as specified and directed. |
| 6 | M&L brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in, old size built in CM (1:6) including demolition of brick work complete all as specified and directed. |
| 7 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 8 | Material & Labour for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on internal/ceiling surfaces including preparation of new plastered surface complete all as specified and directed. |
| 9 | M&L for Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 10 | M & L for complete removal existing treatment from old decorated surface of walls and applying two coats of oil bound distemper of required shade and colour, over a coat of primer, including 1 mm thick approved brand wall care putty, as per manufacturer's specification, including preparation complete all as specified and directed |
| 11 | M & L for complete removal existing treatment from old decorated surface of walls and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, on external surfaces like ceiling of slab/ chajja / band / facia / walls etc over primed surfaces up to two storied builings complete all as specified and directed.Note : Colour code of paint as approved by GE. |
| 12 | M&L for preparation of old plastered decorated surfaces of ceilings and applying two coat of white wash complete all as specified and directed |
| 13 | Demolition of cement concrete ( reinforced) of any description in any position not otherwise specially provide for complete all as specified and directed. |
| 14 | M&L RCC 1:2:4 (Type B1) using 20 mm graded aggregate in slabs supported on walls , beams, columns and similar work etc . complete all as specified and as directed. |
| 15 | Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed |
| 16 | Material and labour for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 17 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles including dismantling of old tiles complete all as specified and directed. |
| 18 | M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed. |
| 19 | Demolition of plain cement concrete (unreinforced) of any mix / grade in ground floor and pavings or sunken slab including removal of debris out off the AF station premises / MOD land etc complete all as specified & directed . |
| 20 | M&L for plain cement concrete 1:5:10, type E-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed. |
| 21 | M & L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sunken floor for correction of slope etc complete all as specified and as directed. |
| 22 | Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 23 | M&L for 20-25 mm thick machine cut kota stone slab flooring or in trades of steps over 15 mm thick screed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing rounding of edges and dismantling of old tiles complete all as specified and directed. |
| 24 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed by Engr-in-Charge |
| 25 | Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed. |
| 26 | Taking down chowkats with shutters (without taking down of shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 27 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. complete all as specified and directed.. |
| 28 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. all as specified and directed. |
| 29 | S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed. |
| 30 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 31 | S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed. |
| 32 | S&F Pressed steel frames 125x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed. |
| 33 | S&F Pressed steel frames 105x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed. |
| 34 | M&L PCC (1:3:6) type C0 using 12.50 mm graded aggregate as infilling in PS Chowkhats complete all as specified . |
| 35 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 36 | S&F 35mm thick skeliton/gauzed shutter factory make open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), supplied and fitted to chowkats all as specified and directed.. |
| 37 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 38 | S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed. . |
| 39 | S&F 300mm long aluminium sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 40 | S&F repairs for Vitreous China wash down water closet pan semi-pedestal pattern (Anglo-Indian Type), white (including fixing bolts,flush pipe) front or back inlet including plastinc water closet seat cover closed pattern with flat bottom and connection to drain (or outgoing pipe) and to flushing pipe, etc and making good to floor complete as in repair all as specified and directed. |
| 41 | S&Frepairs for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with new trap and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan complete as in repairs all as specified. |
| 42 | S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete as in repair all as specified and directed. |
| 43 | S&F in repair Vitreous china wash hand basin white flat back size 450 x 300mm including 32mm CP brass waste fitting, 45 cm long PVC connection with brass nut at both ends,32mm dia PVC west pipe cast iron brackets and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 complete all as specified and directed . |
| 44 | S&F in repair for Pillar taps 15 mm Bore dia cast copper alloy with capstan heads cromium plated fancy type screwed down high pressure with or without lettered 'HOT' or COLD with long screwed for iron pipe complete all as specified and directed. |
| 45 | S&F in repairs Glass shelf assembly fixed to wall with rawl plug and SS bolts complete all as specified and directed |
| 46 | M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 10 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed. |
| 47 | S&F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed.. |
| 48 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipeand fixed double inlets for hot & cold water with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. |
| 49 | S&F in repairs for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm boreand fixed in repair complete all as specified and directed |
| 50 | S&F in repairs Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. |
| 51 | S&F in repairs stop valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore complete. |
| 52 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 53 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as directed and specified. |
| 54 | S&F in repairs tubular towel rail brass chromium plated 20mm dia, D type 60cm long complete. |
| 55 | S&F in repairs 50mm bore low density polyethylene pipes(LDPE) of pressure rating 6 Kg/cm2 laid in trenches complete as specified. |
| 56 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified. |
| 57 | S&F GI tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia including taking down old pipe complete all as specified and directed. |
| 58 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia including taking down old pipe complete all as specified and directed. |
| 59 | Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 15 mm bore complete all as specified and directed. |
| 60 | Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 20 mm bore |
| 61 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified. |
| 62 | PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed. |
| 63 | S&F in repairs stop valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 20 mm bore complete. |
| 64 | S&F fix in repairs tripple layer 500 ltrs rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) white in colour hoisted and fixed in position including float valve complete all as specified in SSR Part-I and directed by engr-in-charge. |
| 65 | S&F cast iron floor trap spun type with CP grating including jointing to waste pipe in run lead dia of outlet 75mm including cutting floor and making good to match with existing surface fixed in repair complete all as specified and directed. |
| 66 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including taking down of old pipe complete all as specified. |
| 67 | S & F bend suitable for 110mm dia PVC (SWR) pipe including clamps complete all as specified and as directed |
| 68 | S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed including taking down of existing Rain water pipe incl fittings. |
| 69 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 70 | M&L 75mm thick PCC 1:2:4 type B1 (using 20mm graded agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement complete all as specifie and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 71 | M&L 75mm thick PCC 1:2:4 type B1 (using 20mm graded agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement complete all as specifie and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender