Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58556567

Tender For Special Repair And Roof Treatment Of Toilet And Bathroom Of Bldg No P-84 And P-79 Under Age B/R-I Of Ge (N) Mamun

Issued by Statutory Bodies & Commissions/Committees · Pathankot, Punjab
Tender Value
43.65 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repair And Roof Treatment Of Toilet And Bathroom Of Bldg No P-84 And P-79 Under Age B/R-I Of Ge (N) Mamun

BOQ

Name of Work:- SPECIAL REPAIR AND ROOF TREATMENT OF TOILET AND BATHROOM OF BLDG NO P-84 AND P-79 UNDER AGE B/R-I OF GE (N) MAMUN
Sl. No. Item Description
1Schedule 'A' Part-I (B/R Works)
2Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.
3Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.
4S&F factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other Frames / Chowkhat of size 65x125mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardantand fixed in position with MS hold fast / lugs /SS dash fasteners of required dia and length (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
5S&F factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other Frames / Chowkhat of size 65x100mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardantand fixed in position with MS hold fast / lugs /SS dash fasteners of required dia and length (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
6S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws (stainless steel butt hinges and necessary S.S screws shall be paid separately), complete all as specified and directed.
7S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided), complete all as specified and directed.
8S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.
9S&F 30mm thick factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face, supplying and fining in frame at site as per specification and drawing
10S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks, 1:2:4 type-B0, (using 12.5mm graded crushed stone aggregate) including wire mesh and plain/frosted glass and two coats of synthetic enamel paint over a shop coat of red oxide primer etc. complete all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3, complete all as specified and directed.
11S&F Powder Coated aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.
12M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, 150 mm handles 2 Nos in each door shutter, 100 mm hinges-03 Nos, 150mm tower bolt -02 Nos in each shutter anodised aluminium snap beading, screws etc., complete all as specified and as directed.
13S&F aluminium window and ventilator shutters powder coated of any colour (thickness or powder coating not less than 50 micron), side hung type without sash bars/ Sliding windows, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.
14Preparation of old wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.
15Preparation of old steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint , complete all as specified and directed.
16Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
17S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
18M&L for hacking out old broken glass (any thickness, size, quality or description) from frame glazed with putty or fixed with beads / clips, complete all as specified and directed.
19S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / glazing pins in squares not exceeding 0.50 Sqm, complete all as specified and directed.
20S&F 3mm thick sheet glass obscured or frosted, on one side glass, ordinary quality and glazing with oil putty / wooden beading / glazing pins in squares not exceeding 0.50 Sqm, complete all as specified and directed.
21S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..
22S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
23S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.
24S&F 150mm size Aluminium anodised, handle of extruded section, fabricated type, anodised and fixed, complete all as specified and directed.
25S&F 300mm mild steel ordinary rat tail pattern springs for door including rollers and roller plate, complete all as specified and directed.
26S&F in repairs 25mm dia stainless steel drapery curtain rods, chromium plated including ornamental brackets, clamps etc., complete all as specified and directed.
27Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.
28M&L for brick work with fly ash bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed.
29Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
30M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed.
31M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling, soffits of slabs, chajjas, columns and beams etc in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed.
32M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 in two layers (5mm finishing layer over 10mm base layer) and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately).
33M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces of fascia / edging / ceiling of Chajjas, roof projections etc in CM 1:3 and finishing even and smooth without using extra cement including taking out peeled off plaster / concrete and making the line in true shape, complete all as specified and directed.
34Preparation of new plastered surfaces of external wall and chajjas and making the surface smooth with sand paper and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer, complete all as specified and directed.
35Preparation of newly plastered wall surfaces by using necessary filling compound of Altek/Birla white 2mm thick wall care putty to obtain smooth / even surface using sand paper and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.
36Preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.
37Complete removal of existing treatment of walls and applying 2mm thick wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.
38Complete removal of existing surface treatment from the old plastered surface of wall,chajjas, facia etc. and applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer, complete all as specified and directed.
39Preparation of old plastered or unplastered wall surfaces including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of white wash, complete all as specified and directed.
40Preparation of old plastered or unplastered ceiling surfaces including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. and applying two coats of white wash, complete all as specified and directed.
41Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed.
42Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
43M&L for 25mm thick plain cement concrete, 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base of floor finish even and rough to receive further floor finishes, complete all as specified and directed.
44M&L for 10mm thick Vitrified Ceramic tiles, dark shade, (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
45M&L for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
46M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.
47M&L for 20-25mm thick machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing / grinding and polishing upto mirror finish complete over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
48M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 15mm thick backing coat in CM 1:4, complete all as specified and directed.
49M&L for 18 to 20mm thick Green marble work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms with gas pipe hole, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed.
50M&L for round chamfering to the edges of marble slabs, complete all as specified and directed
51S&F hollow PVC wall paneling, decorative type, consisting of 5mm thick plain colour PVC pre-laminated sheet inclusive of solvent cement, screws and and fixing at site on PVC frame or wall as per specifications, complete all as specified and directed.
52S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and directed.
53S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing hollow PVC ceiling paneling, decorative type, consisting of 5mm thick plain colour PVC pre-laminated sheet inclusive of solvent cement,screws and and fixing at site, complete all as specified and directed.
54M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without extra cement, complete all as specified and directed.
55Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.
56Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.
57S&F 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.
58Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls, concrete cutting n exc 10cm girth. complete all as specified and directed.
59S&F 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.
60S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed.
61S&F in repairs 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed both ends including necessary fittings such as sockets for pipe or for union, complete all as specified and directed.
62S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
63S&F in repairs swivel shower of CP with shower arm 125mm size for fixing with 15 mm bore GI pipe, complete all as specified and directed .
64S&F in repairs brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed.
65S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick PVC / AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed
66S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed.
67S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.
68S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed.
69S&F in repairs vitreous China urinal half stall type, white, suitable for childrens with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs,bedding urinal agaist wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including CP urinal spreader of any colour for fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed.
70S&F in repairs vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc., complete all as specified and directed.
71S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.5m fitted in the existing water connection in the toilets, complete all as specified and directed.
72S&F in repairs toilet paper holder, vitreous China, box type, white, fixed to walls with chromium plated brass screw, complete all as specified and directed.
73S&F in repairs soap dish, brass chromium plated any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.
74S&F in repairs corner shelves consisting 3 sets of PTMT fixed with and including chromium plated brass screws, railing and wooden/ plastic cleats (minimum weight 300gms), complete all as specified and directed.
75S&F in repairs mirror cabinet selected quality of size 450mm x 600mm, box type, with PVC frame, complete all as specified and directed.
76S&F stainless steel peg set of 06 Nos of approved make fixed with mild screw, complete all as specified and directed.
77S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed.
78S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm Ball brass valves, high pressure, with polythene float and flynut including dismantling existing water tank and removing from site, complete all as specified and directed.
79S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
80S&F in repairs corner sheet glass shelf assembly consisting 5.5mm thick sheet glass, chromium plated, 300mmx300mm with chromium plated brackets, guard bar and railing, complete all as specified and directed.
81S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls with clamps, complete all as specified and directed.
82S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls with clamps, complete all as specified and directed.
83S&F in repairs 110mm size PVC bore (SWR) branch piece, single Y equal or unequal, complete all as specified and directed.
84S&F in repairs 110mm size PVC (SWR) bends of any radius, complete all as specified and as directed.
85S&F in repairs 75mm size PVC (SWR) bends of any radius, complete all as specified and as directed.
86S&F in repairs 75mm size PVC bore (SWR) branch piece, double Y equal or unequal, complete all as specified and directed.
87S&F in repairs 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.
88S&F in repairs 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed.
89M&L for 20mm thick cement plaster on concrete surfaces in cement mortar 1:4, finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 litre in 50 Kg of cement, complete all as specified and directed. (WPC shall be measured and paid separately). Please Enable Macros to View BoQ information
90M&L for 20mm thick cement plaster on concrete surfaces in cement mortar 1:4, finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 litre in 50 Kg of cement, complete all as specified and directed. (WPC shall be measured and paid separately). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58556567
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.65 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair And Roof Treatment Of Toilet And Bathroom Of Bldg No P-84 And P-79 Under Age B/R-I Of Ge (N) Mamun
Basic Detail
Tender No GE(N)/M-77/2026-27
Bidding Type Tender
Location
City Pathankot
State Punjab
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 43.65 Lakhs
Tender Fee 500
EMD 87300
Exemption Not Available
Document List
62395155-1236-443c-8908-c85b64d203ba.html
BOQ_896426.xls
Tender77.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

62395155-1236-443c-8908-c85b64d203ba.html

xls

BOQ_896426.xls

pdf

Tender77.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender