Power Boards / Undertakings / PSU Closing in 8 days TDR #58553828

Tender For New Feeder To Omassery Town Under Electrical Section Omassery

Issued by Boards / Undertakings / PSU · Kozhikode, Kerala
Tender Value
41.97 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
50000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For New Feeder To Omassery Town Under Electrical Section Omassery

BOQ

Name of Work:- NEW FEEDER TO OMASSERY TOWN UNDER ELECTRICAL SECTION OMASSERY
Sl. No. Item Description
1Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.
2Doing one cable end termination on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally after making fencing,caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers.
3Mounting and connecting HT XLPE UG cable ends of all sizes upto and including 3x300 sq mm with special type cable clamps, bolts, nuts, terminal protectors etc.including cost of extra materials if needed and giving necessary jumper connections.
4Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at standard distance (1.5m) away from the pole/structure in ordinary soil & backfilling the pit with 15cm alternate layer of charcoal, salt and sand up to 90cm from the bottom. including the cost of 20kg salt, 25kg charcoal, excluding supply of earth pipe.
5Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
6Laying HT XLPE UG cable of sizes beyond 3x185 sq mm and upto and including 3x300 sqmm by HDD method including cost of 110 mm HDPE pipe, coupler etc. transporting cable from storage site to work site including loading and unloading, pulling cable through pipe carefully, providing HDD route markers at pit locations etc. complete as per the direction of department officer at site excluding cost of cable.
7Excavation of cable trench of appropriate size ( normally 1.2m deep and 0.35m /0.5m wide for single/double run) in all classes of soil including breaking clods, watering, ramming and sectioning of soil bank etc. and back filling the soil after cable laying and consolidating the soil in layers of 75cm (excluding laying of cable).
8Laying HT XLPE UG cable of sizes beyond 3x185 sq mm and upto and including 3x300 sqmm including conveying cable from Sub Regional Store/stacking place to work site and laying it carefully using cable rollers, taking through stone ware/G.I.pipes at road crossing/culverts/bridges etc. whereever necessary, providing identification tags at 5m intervals, filling the space around the cable with riddled soil and covering the top with bricks, providing cable route markers at 100m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour and transport including crane charges excluding excavation and backfilling.
9Additional rate for excavating trench on tarred/concrete surface of specified size.
10Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
11Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
12Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
13Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
14Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.
15Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
16Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
17Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon or equivalant (3 conductors) after fitting insulators, binding conductors to pin insulators using suitable tie and anchoring with wedge type anchoring clamps including cutting and removing tree branches wherever necessary excluding cut point works.
18Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.
19Fiting One No MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable
20Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm and connecting to existing MVT or other terminals,using the cable end termination kit supplied departmentally including charges for cable jointer etc. complete as per the direction of the departmental officers.
21Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
22Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
23Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.
24Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
25Drilling hole of various sizes on existing Channel/Cross Arm. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553828
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 41.97 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender For New Feeder To Omassery Town Under Electrical Section Omassery
Basic Detail
Tender No PMU/KKD/e-Tender/33/2026-27 Dtd 16-11-2026
Bidding Type Tender
Location
City Kozhikode
State Kerala
Key Dates
Publish Date 16 Nov 2026
Submission Date 25 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 41.97 Lakhs
Tender Fee 5900
EMD 50000
Exemption Not Available
Document List
8c2052fa-e3cb-49d7-8c80-190177db7b55.html
Biddocument_UG.pdf
BOQ_1519721.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

8c2052fa-e3cb-49d7-8c80-190177db7b55.html

pdf

Biddocument_UG.pdf

xls

BOQ_1519721.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender