Drinking Water Supply and Sanitation Government Departments Closing in 18 days TDR #58553686

Tender For Dnit Of Rejuvenation Of Water Supply System Including Construction Of Water Treatment Plant Based On Rapid Sand Gravity Filters In Morni Area For 20 No. Dhanies Under Gram Panchayats Bhoj Jabiyal, Bhoj Dharti, Uttron And Part Of Bhoj Balia

Issued by Government Departments · Panchkula, Haryana
Tender Value
3.73 Crore
Estimated cost
Bid Submission
09 Dec 2026
18 days left
EMD
7.46 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Dnit Of Rejuvenation Of Water Supply System Including Construction Of Water Treatment Plant Based On Rapid Sand Gravity Filters In Morni Area For 20 No. Dhanies Under Gram Panchayats Bhoj Jabiyal, Bhoj Dharti, Uttron And Part Of Bhoj Baliag, Block Morni, District Panchkula Including Operation And Maintenance During Defect Liability Period For 12 Months After Successful Completion Of 3 Months Trial Run Period And There After For 5 Years Complete In All Respect And All Other Works Contingent Thereto. Amt. Rs. 373.25 Lacs

BOQ

Name of Work:- DNIT of Rejuvenation of Water Supply System including Construction of Water Treatment Plant based on Rapid Sand Gravity Filters in Morni Area for 20 No. Dhanies under Gram Panchayats Bhoj Jabiyal, Bhoj Dharti, Uttron and part of Bhoj Baliag, Block Morni, District Panchkula including Operation and Maintenance during defect liability period for 12 months after successful completion of 3 Months trial run period and there after for 5 years complete in all respect and all other works contingent thereto. Amt. Rs. 373.25 Lacs
Sl. No. Item Description
1Providing and fixing 40 mm outer diameter uPVCpipe sleeves (6 kg/cm² pressure class), conformingto IS 4985:2020, in RCC infiltration gallerywalls/slabs for formation of weep holes, includingcutting, placing in position before concreting, fixing,and all incidental works, complete in all respects asper directions of Engineer-in-Charge
2Providing, lowering, laying, aligning and fixing in position 300 mm outer diameter uPVC slotted/perforated pipes (10 kg/cm² pressure class), duly ISI marked conforming to IS 12818:1992, including all fittings, jointing, testing and commissioning, complete in all respects, for use as collector pipes in infiltration gallery, as per directions of Engineer-in-Charge
3Providing, supplying, erection, testing and commissioning Supply and installation of cast iron manually operated sluice gates of size 1000 mm (W) × 800 mm (D) to be provided at the receiving chamber, complete in all respects as per IS 13349:1992. The sluice gate shall be suitable for open channel installation, including all necessary components such as frame, gate leaf, spindle, operating mechanism, and anchor bolts. The gate shall be pressure-tight and suitable for sewage application, coated with anti-corrosive epoxy paint. ( MAKE: JASH)
4Providing, lowering, laying, aligning, fixing and jointing of ISI marked GI pipes Class – B conforming to IS 1239 (Part I and II) for rising main in hilly terrain, including all leads, lifts, levels and depths, complete with threading, welding, cutting, bending, drilling and jointing (screwed/flanged/welded), providing and fixing all specials such as bends, tees, reducers, flanges etc. as per alignment, laying in trenches/over slopes with proper supports, anchor/thrust blocks in RCC M-30, protection works, anti-corrosion treatment, carriage, loading, unloading, sectional hydro testing and commissioning complete in all respects as per specifications and directions of Engineer-in-Charge: earthwork to be measured and paid separately. (100mm i/d GI PIPE)
5Providing, Supplying, Installation, Testing and Commissioning of Non-Clog Submersible Sewage Pump Set (power-driven submersible pump suitable for handling raw water containing silt, suspended solids, floating impurities and debris during monsoon/high turbidity conditions from river source, with end suction enclosed SS CF8M impeller and volute casing), complete with suitable motor operating at 960 RPM, mechanical seal, thermal and moisture sensors, suspension device, anti-coupling bracket, guide rails (GI guide pipe with coupler at every 3.0 m and SS-411 hardware), lifting chain (alloy steel with oval ring at every 2.0 m and D-bow shackle at one end), power/control cable from sump well to pump chamber and panel, including LT PMU auto-coupling arrangement with integral bend, auto-coupling pin, SS foundation bolts, base frame and RCC foundation, complete in all respects as per specifications and scope of work, suitable for discharge of 17 m³/hr (300 LPM) at 40 m head with 7.5 HP motor. Make-Grundfos/Aqua/KSB.
6Providing, supplying, erecting, installing, testing and commissioning of LT Indoor fully automatic Control Panel complete with wireless-based Remote Controlling Unit with Push Buttons (PB) for pump control and pump status indication system for a distance of 1.5 km, including Pump Monitoring Unit (PMU), complete with Star/Delta starter, A/M switch for auto control through PLC, push buttons for manual operation, status indicating lamps, reputed make contactors, voltmeter, ammeter, digital multifunction/energy meter, hour meter, surge protection device (SPD), cables, MCBs, power capacitors etc., suitable for integration with SCADA Master Control System, for 1 Working plus 1 Standby pump arrangement (complete set for 2 Nos. pumps). Motor control Panel having required front surface area, fabricated in fully design from CRCA sheet steel 2 mm thickness for framework and covers and 3 mm thickness for gland plates, complete with cleaning, finishing and 10-tank spray-based tricationic phosphating treatment process for powder coating in approved shade, provided with jointless PU foam gasket without manual pasting having temperature withstand capacity from -40°C to plus 120°C for maintaining required IP protection, complete in all respects to the satisfaction of the Engineer-in-Charge, suitable for 7.5 HP non-clog submersible sewage pumps having discharge capacity of 17 m³/hr at 40 m head with additional 25% loading margin for safety Make- BCH, LandT, Schneider Electric.
7Operation and maintenance for complete scope of work mentioned in DNIT i.e. WTP 0.25 MLD, Rising Main, complete work etc. The cost will be charged to Annual Maintenance estimate during defect liability period of 12 months after successful completion of 3 months trial run period. (operation only)
8Operation and maintenance for next 5 years for complete scope of work mentioned in DNIT i.e. WTP 0.25 MLD, Rising Main, complete work etc. The cost will be charged to Annual Maintenance estimate after completion of defect liability period of 12 months.
9Providing, fabricating, assembling and fixing Mild Steel (MS) pipe of 150 mm nominal bore (NB), having 165.1 mm outside diameter and 5.4 mm minimum wall thickness, Heavy Class, conforming to IS 1239 (Part 1):2004, including cutting, bevelling, bending, drilling, edge preparation, welding with approved welding electrodes in accordance with relevant welding standards, fabrication of joints, bends, tees, reducers and other specials wherever required, and fixing in proper line, level and alignment. The work shall include thorough surface preparation by mechanical cleaning to remove rust, grease, mill scale and other foreign matter, application of suitable anti-corrosive protective coating on internal and external surfaces, including approved primer and finishing coats, as per the requirements of the installation environment. The rate shall also include all materials, labour, welding electrodes, tools and plants, machinery, scaffolding, handling, loading, unloading, transportation, carriage, erection, jointing, inspection, testing, and all incidental charges required for satisfactory completion of the work in all respects, including hydrostatic pressure and leakage testing, complete as per relevant IS Codes, approved drawings and directions of the Engineer-in-Charge.
10Design, Engineering, Construction, Supply, Installation, Testing and Commissioning of 0.25 MLD capacity conventional Water Treatment Plant (WTP) based on Rapid Sand Filtration Technology (for hilly terrain conditions), including complete Civil, Electrical, Mechanical, Instrumentation, Automation, PLC and SCADA works, comprising construction and commissioning of Raw Water Receiving Chamber, Flash Mixer, Flocculation Basin, Settling/Clarification Zone, Rapid Gravity Sand Filters with filter media, pipe gallery, backwash water tank, sludge/drain arrangements, blower room, chemical store, chemical dosing room, duty room, interconnecting pipelines, valves and all allied treatment units, including supply, installation and commissioning of pumps, blowers, chemical dosing systems, MCC panels, PLC-based automatic control and monitoring system with SCADA integration, online instruments, flow meters, level sensors, pressure gauges, power and control cabling, internal electrification, lighting, earthing and all associated electro-mechanical equipment complete in all respects, conforming to CPHEEO Manual and as per approved designs, drawings and technical specifications, including all ancillary, appurtenant and allied works required for efficient and satisfactory operation of the plant, complete with testing, trial run, performance testing and successful commissioning of the entire WTP system in all respects as per the Detailed Sepeficiations and the directions of the Engineer-in-Charge.
11HSR ITEMS Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553686
AUTHORITY Government Departments
TENDER VALUE 3.73 Crore
LAST DATE 09-12-2026
Authority
Authority Name Public Health Engineering Department
Work Description Tender for Dnit Of Rejuvenation Of Water Supply System Including Construction Of Water Treatment Plant Based On Rapid Sand Gravity Filters In Morni Area For 20 No. Dhanies Under Gram Panchayats Bhoj Jabiyal, Bhoj Dharti, Uttron And Part Of Bhoj Baliag, Block Morni, District Panchkula Including Operation And Maintenance During Defect Liability Period For 12 Months After Successful Completion Of 3 Months Trial Run Period And There After For 5 Years Complete In All Respect And All Other Works Contingent Thereto. Amt. Rs. 373.25 Lacs
Basic Detail
Tender No 20267712A327 AA9D 42CB 8053 EE5CDA019298547PUH
Bidding Type Tender
Location
City Panchkula
State Haryana
Key Dates
Publish Date 16 Nov 2026
Submission Date 09 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 3.73 Crore
Tender Fee 15000
EMD 7.46 Lakhs
Exemption Available
Document List
584a3fa8-c53b-4f60-ab07-40b9eee21bdf.html
BOQ_640736.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

584a3fa8-c53b-4f60-ab07-40b9eee21bdf.html

xls

BOQ_640736.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender