Housing Urban and Rular Development Local Bodies Closing in 6 days TDR #58553627

Tender For Renovation Of House No.1, (Type-6), Sector-7, Chandigarh (E.I Work)

Issued by Local Bodies · Chandigarh, Chandigarh
Tender Value
4.51 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
9040
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Renovation Of House No.1, (Type-6), Sector-7, Chandigarh (E.I Work)

BOQ

Name of Work:- RENOVATION OF HOUSE NO.1, (TYPE-6), SECTOR-7, CHANDIGARH (E.I WORK)
Sl. No. Item Description
1DSR Item No. 1.10Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
2Group B
3DSR Item No. 1.15Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.
4Group B.
5DSR Item No. 1.16Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.
6DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
73 x 1.5 sq. mm
83 x 2.5 sq. mm
93 x 4 sq. mm
10DSR item No.1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
112 Pair
12DSR Item No.1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
13DSR item No.1.31Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
14DSR item No.1.32Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
15DSR Item No. 2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections Ics=100% Icu and Operational Voltage 690V etc. as required.
16100 A,30KA,FPMCCB
17DSR item No.5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
18DSR item No.5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
19Supply & fixing of Computer jack & contact one module RJ45 of Molex/ R&M/ Panduit make including making connection etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.
20Supply and laying of XLPE insulated PVC sheathed Aluminium conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of M.S. clamp of suitable thickness. (As per Complete Item No. 13 of the DNIT).
2110 Sq.mm. 2 Core XLPE Armoured Aluminium conductor cable
22S/E of 8 way/ 10 way indicating call bell including making connection testing and other petty material required to complete the job to the entire satisfaction of Engineer-in-charge. The indicator should be of reputed make only.
23DSR Item No. 39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, (As per Complete Item No. 15 of the DNIT).
241 Run of cable
25DSR item No.9.2.4 Brush Less Direct Current (BLDC) Fan without RemoteSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, (As per Complete Item No. 16 of the DNIT).
261200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
27DSR item no.8.9.5 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, (As per Complete Item No. 17 of the DNIT).
2818- 22 watt
29Supply & erection of fresh air fan high speed motor with copper wound 10” sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of Havells make Ventiliar DX White / Orient make Ventilator / Crompton make Brisk Air/ Bajaj make 70049 250mm sweep only. (As per Complete Item No. 18 of the DNIT).
30S/E of LED 8W/ 9 W. bollard fitting. The bollard should be approximately (800 mm long and 200 mm wide) from the top of the fitting. The bollard should be made out of extruded aluminium profile and die cast aluminium base with PMMA/ Opal diffuser bollard painted with superior quality of paint. (As per Complete Item No. 19 of the DNIT).
31DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
325/6 amps switch
333 Pin 5/6 A. socket outlet
3415/16 amps switch
356 Pin 15/16 A. socket outlet
36TV antenna socket outlet
37Bell push
382 way 5/6 A. switch
39Telephone socket outlet
40DSR item No.1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
41Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (As per Complete Item No. 22 of the DNIT).
42Size 12” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make HDEF EXHD 380-6-1/ Bajaj make Supreme PLUS/ Usha (Turbo HDEF) only
43S/E of LED Bulk Head Luminaries weather proof frosted light with PMMA / PC reflector and silicon gasket to be installed on surface. The LED fitting should have minimum system Lumen output minimum 1000 Lumen and the driver of the fitting should be workable on 140-260 Volt. (As per Complete Item No. 23 of the DNIT). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553627
AUTHORITY Local Bodies
TENDER VALUE 4.51 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Chandigarh Administration Engineering Department
Work Description Tender For Renovation Of House No.1, (Type-6), Sector-7, Chandigarh (E.I Work)
Basic Detail
Tender No E1/TN-491
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 16 Nov 2026
Submission Date 23 Nov 2026
Open Date 23 Nov 2026
Finance
Tender Value 4.51 Lakhs
Tender Fee Ref. Documents
EMD 9040
Exemption Not Available
Document List
716f1c53-1333-4221-9758-26ec63311fff.html
Annexure.pdf
BOQ_119193.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

716f1c53-1333-4221-9758-26ec63311fff.html

pdf

Annexure.pdf

xls

BOQ_119193.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender