Tender For Supply, Installation, Testing And Commissioning (Sitc) Of New Csir-Neeri Signages At Main Building Front Wall And Rooftop Of Main Building (Lift Shaft), Csir-Neeri, Nagpur.
Tender Value
6.48 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
7 days left
EMD
13000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning (Sitc) Of New Csir-Neeri Signages At Main Building Front Wall And Rooftop Of Main Building (Lift Shaft), Csir-Neeri, Nagpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing & commissioning signage’s Board on Main Building wall (Size 14X1.7 mtr), above porch/entrance at the height 7.3 mtrs from ground with following Specifications - (a Representational Drawing and its dimensions has been attached herewith for ready reference.) |
| 2 | A. Letter - CSIR-NEERI / National Environmental Engineering Research Institute - The material will be Rose Gold 304-grade or above steel sheet (0.8 mm), and the letters will be fully machine-fabricated. 10mm Cast Acrylic on backside of letters, Modular LED (1.8watt) to be use in letter, 1Sq. mm. wire for electrical wiring, 400w SMPS for power supply, 1.5\\"x1.5\\" MS PIPE 16 GEUGE. |
| 3 | B. Size:CSIR Logo - 1.1mX0.76mX25mmNEERI logo - 1.1mX0.76mX25mmCSIR-NEERI - all letters in minimum length 4 mtr with suitable size having height 0.5m and thickness 25mm.National Environmental Engineering Research Institute - all letters in minimum length 11.67 mtr with suitable size having height 0.3m and thickness 25mm. |
| 4 | C. CSIR & NEERI logo will be provide Departmentally. CSIR logo, NEERI logo and all letters will have back light LED's. |
| 5 | D. The fabrication, mounting, electrical connections, illumination and finishing shall be carried out suitably to ensure a durable and aesthetically pleasing installation. As per attached drawing. |
| 6 | E. Required cement concrete and any constructional work for base for NEERI Sign board, shall be done by contractor if required. |
| 7 | *Tentative Drawing is attached. Final drawing & 3D representational drawing / presentation shall be prepared by supplier and submit to NEERI for approval. |
| 8 | Supply, Installation, Testing & commissioning signage’s Board with ACP Covering for letters and Base (board of minimum size 6.70X0.85 mtrs), The letters will be mounted onto the structure. Front side 3mm Acrylic sheet Modular (AC) led back side ACP sheet. (Letter Height -0.762 m) to be installed on Lift Shaft/Terrace/rooftop of Main Building as specified with following Specifications - (a Representational Drawing and its measurement has been attached herewith for ready reference.) |
| 9 | A. Letter - CSIR-NEERI - The letters will be made of aluminum channel with a trim cap, and the logo will feature UV printing. The letters will be mounted on the structure of minimum 6.65mtrsX0.78 mtrs at Lift Shaft/Terrace/rooftop. (As specified below). (Logo and letters have same height and length shall be in proportionate.) |
| 10 | B. Required ACP Covering for letters and Base have same height and length shall be in proportionate. |
| 11 | C. CSIR & NEERI logo will be provide Departmentally. CSIR logo, NEERI logo and all letters will have back light LED's. |
| 12 | D. The fabrication, mounting, electrical connections, illumination and finishing shall be carried out suitably to ensure a durable and aesthetically pleasing installation. As per attached drawing. |
| 13 | E. Required cement concrete and any constructional work for base for NEERI Sign board, shall be done by contractor if required. |
| 14 | *Tentative Drawing is attached. Final drawing & 3D representational drawing / presentation shall be prepared by supplier and submit to NEERI for approval. |
| 15 | SITC of GI Pipe Structure: The structure will be fabricated using 1.5-inch by 1.5-inch pipes, 6-inch x 6-inch plates (0.6 mm thick) will be fixed using anchor bolts. The frame size will be 6.7Mtr x 0.76 mtrs, with 45-degree supports provided at the back. The structure will be finished in grey. Subsequently, perforated ACP sheets will be installed, followed by the mounting of the letters. All frame and support shall be grouted in CC foundation of 0.3mtrsX0.3mtrsX0.3mtrs each. Structure have provision of air passing to avoid damage to board. (For Item No. 2) |
| 16 | Providing, temporary erecting, maintaining, shifting, and dismantling of suitable scaffolding required for execution of installation of signage boards works, including all necessary scaffolding pipes, couplers, clamps, base plates, platforms, ladders, bracing, guardrails, toe boards, safety nets, and other accessories. The scaffolding shall be properly secured, stable, and capable of safely supporting workers, materials, and equipment. All work shall comply with applicable safety standards and shall include transportation, erection, dismantling, and removal from site upon completion. (For Item No. 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender