Tender For Construction E Type Quarter At Champua For Je Project Section For The Year 2026-27_Building
Tender Value
30.81 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
7 days left
EMD
30820
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction E Type Quarter At Champua For Je Project Section For The Year 2026-27_Building
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of foundation in hard soil within initial lead of 50 mtr and lift of 1.5 mtr etc including levelling and dressing the foundation trenches, stacking the excavated materials away from the work site etc as per the instruction of E.I.C. |
| 2 | Supplying, filling in foundation & plinth with well watered sand in layers not exceeding 150mm thick including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 3 | Providing Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
| 4 | Brick work with Fly Ash brick in foundation & plinth using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C. |
| 5 | R.C.C.work of M25 having a minimum comprresive strength 250 kg/Cm2 of 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 20mm down grade size black hard crusher broken granite chips including hoisting,lowering(A) Column Base |
| 6 | (B) Column -GF |
| 7 | (C) Plinth Beam |
| 8 | (D) Lintel -GF |
| 9 | (E) Chajja -GF |
| 10 | (F) Wall Beam |
| 11 | (G) Roof Slab -GF |
| 12 | Supplying and straightening bent up or coiled rods cutting, bending, cranking, hooking, welding (if required) the M.S.Rods or Tor steel & binding and tying the grills, hoisting, lowering & placing in proper position as required for R.C.C. works with all cost, conveyance & taxes of M.S. rods or Tor steel & binding wires of 18 to 20 gauge & labour with all T&P required for the work etc. complete in all floors (weight of binding wires and laping of MS rod will not be considered for payment & payment will be made on weight of M.S.rods or Tor steel only).as per direction of the Engineer-in-charge. |
| 13 | Brick work with Fly Ash brick in superstructure using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C. |
| 14 | 2.5 cm. thick grading concrete (1:2:2) on roof slab with 6mm. size hard granite chips on new work.as per direction of the Engineer-in-charge. |
| 15 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge. |
| 16 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge. |
| 17 | Providing fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of approved make on 25mm thick bed of cement mortar (1:1) joint with neat cement slury mixed with pigment to match the shade of tile including polishing, rubbing etc. including cost, conveyance, royalty, taxes of all materials and cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 18 | Providing and fixing Ceramic tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 19 | Providing fitting and fixing of M.S. doors, windows & grill gate of approved design and fixing in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black crusher broken granite stone chips of 12mm with cost and conveyance, royalities of all materials, all labour taxes with all T&P etc. complete in all floors as per direction of the Engineer-in-charge. |
| 20 | Supplying, fiting and fixing of 35mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete. |
| 21 | Supplying. fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 22 | Supplying and fixing of roller Blinds by fixing powder coated top channel, bottom channel with bottom end gap,control unit and good quality of 0.60 mm thick fabric of approved design and quality etc complete. |
| 23 | Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge. |
| 24 | Finishig Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge. |
| 25 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 26 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. |
| 27 | Providing fitting and fixing of M.S. doors, windows & grill gate of approved design and fixing in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including etc complete as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender