Housing Urban and Rular Development Government Departments Closing in 7 days TDR #58553447

Tender For Construction Of Hl Bridge Over Local Nallah On Borigumma-Kamata-Kumuli Road At 8/300Km (Doraguda)

Issued by Government Departments · Koraput, Odisha
Tender Value
4.94 Crore
Estimated cost
Bid Submission
30 Nov 2026
7 days left
EMD
4.95 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Hl Bridge Over Local Nallah On Borigumma-Kamata-Kumuli Road At 8/300Km (Doraguda)

BOQ

Name of Work:- Construction of HL Bridge over Local Nallah on Borigumma-Kamata-Kumuli road at 8/300km (Doraguda)
Sl. No. Item Description
1Cleaning and grubbing road land including uprooting vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness
2Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.
3Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of other structures graded and compacting
4Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density.
5Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoRT&H Specifications for Road & Bridge works(5th Revision)
6Providing and laying moorum and sand admixture in shoulders as per Clause 407 of MoRT&H specifications for road & bridge works (4th revision)
7Construction of Granular Sub-Base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401
8Providing, laying, spreading and compacting graded stone aggregate to WMM specification as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
9Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
10Providing and applying tack coat with bitumen emulsion on prepared surface including cleaning of road surface and spraying primer at the rate of 0.20kg/sqm using mechanical means as per clause no.501.5.2, 502 of MoRT&H specification and direction of the EIC
11Providing and laying bituminous macadam with hot mix plant using crushed aggregates of Grading-II and VG-30 grade of bitumen as per Clause 504 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
12Providing and laying SDBC using crushed aggregates of Grading-II and VG-30 grade of bitumen as per Clause 508 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
13Road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface.
14Supplying Fitting Fixing of 15 cm dia 1.5mt long guard posts of RCC 1:2:4 using 3.5 kg of steel for each guard post with BHG chips including cost of all reinforcement material centering shuttering etc complete
15Providing retro-reflectorised cautionary, Mandatory and Informatory sign boards as per IRC. 67 made of high intensity grade sheeting vide clause no. 801.3 fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75 x 75mm x 6mm size as per approved drawing as per clause no.801.08 of MoRT&H specification and direction of the Engineer-in-charge90CM Equilateral triangular sign board
1660cm Circular
1780 x 60cm Rectangular
1890cm high octagon
1960 x 45cm hazard marker
201200 x 900cm Informatory board 2 x 1.20 x 0.8cm = 1.92 sqm
21Providing & erecting a \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150mm x 75mm x 5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision).
22Gravel backing to revetments as per approved Drawing & Technical Specifications and as per Section 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.
23Rough stone dry packing in approns and revetments with cost of all materials, labour, T&P etc. complete. Including cost conveyance taxes of all materials
24Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
25P.C.C.M-15 Grade in foundation bed as levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).
26Providing and laying Filter Media with crushed stone aggregates of 45mm size satisfying requirements laid down in as per approved Drawing & Technical Specifications and Clause 2504.2.2 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
27Plain cement concrete M-15 in Sub-structure with crushed stone aggregates 20mm size technically mixed, placed in foundation and compacted including cost of all materials, labour, T&P etc. complete. (Above Bed)
28Reinforced cement concrete M-25 nominal mix with crushed stone aggregates to 20mm nominal size mechanically mixed placed in foundation and compacted by vibration including curing for 14 daysas per Section No.1000 and 2100 of MORT&H specifcation and direction of the Engineer-in-charge a)Foundation
29b)Sub-Structure
30Supplying fitting and fixing HYSD bars reinforcement in foundation, substructure and superstructures as per drawing and technical specifications as per section 1600 of MORT&H specifcation and direction of the Engineer-in-charge
31Providing & fixing in position RCC Crash barrier monolithic with slab M-40 grade as per approved drawing and technical specifications as per clause 809, section 800 & 1000 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
32Providing weep holes in brick masonry / plain or RCC abutment, wing wall and return wall with 100mm dia AC pipe extending through the full width of structure with slope of 1V : 20H towards draining face complete as per drawing and technical specification as per clause no.2706 of MoRT&H specification and direction of the EIC
33Drainage spouts complete as per drawing and technical specification of MORT&H specifcation and direction of the Engineer-in-charge
34Reinforced Cement Concrete M-30 complete as per Drawing and Technical Specifications. stone chips including hoisting and laying including cost, conveyance taxes of all materials, labour T&P required for the work etc. complete as per specification and direction of the Engineer-in-chargea)Abutment, Pier Shaft & return wall
35b)Dirt Wall
36c)Abutment & Pier Cap
37d)Girder & Deck Slab
38e)Approach Slab
39R C C M40 grade for bearing pedestal as per approved drawing and technical specification as per section 1500 , 1700 & 2200 of MOSRT&H, Specification for Road and Bridge works (4th revision)
40R.C.C M-35 grade in Pile cap for abutment and pier with formwork using 20mm to 10mm shed stone aggregates mixed by concrete mixer, laying in layers and compacting by brator & all leads and lifts as per approved Drawing & Technical Specifications and as per
41R.C.C. M-35 grade Bored cast-In-situ pile of 1.000m dia excluding reinforcement complete including removal of excavated earth with all leads & lifts up to 1000mtr. as per approved drawing & technical Specifications, as per Section 1100 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete.
42Supplying, Fitting, Fixing and Placing in position Steel Liner of 6mm thick for pile shaft as per approved Drawing & Technical Specifications and as per Section 1200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete.
43Providing and laying mastic asphalt concrete of 25mm thick premixed with bituminous binder, transported to site, laid over a previously prepared surface as per clause 504 of MoSRT&H Specification for Road and Bridge works (5th revision)
44Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & CRMB-55 grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
45Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.
46Supplying, Fitting, Fixing and Placing in position Compression Seal Expansion Joints as per approved Drawing & Technical Specifications and Section 2600 of MoRT&H Specifications for Road & Bridge works (5th Revision).
47Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet and guard post for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge.
48P.C.C. M-20 Grade in Substructure of structure & CD work with formwork using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section -1500, 1700, 2100 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete.
49Grouting aprons and revetments of 23cm deep with cement concrete (1:4:8) using 2.5cm size hard crusher broken coarse aggregates as per approved Drawing & Technical Specifications for finished item of work including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553447
AUTHORITY Government Departments
TENDER VALUE 4.94 Crore
LAST DATE 30-11-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Construction Of Hl Bridge Over Local Nallah On Borigumma-Kamata-Kumuli Road At 8/300Km (Doraguda)
Basic Detail
Tender No CCEJC RandB 14 2026 27
Bidding Type Tender
Location
City Koraput
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 4.94 Crore
Tender Fee 10000
EMD 4.95 Lakhs
Exemption Available
Document List
BOQ_621452.xls
e7d2d241-c7eb-4ad1-9a5e-5b6928a0eeca.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_621452.xls

html

e7d2d241-c7eb-4ad1-9a5e-5b6928a0eeca.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender