Tender For Special Repair Work From Barhan Kurgawa To Nagla Mansingh Road.
Tender Value
25.60 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
7 days left
EMD
2.56 Lakhs
Bank guarantee accepted
Document Fee
960
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Work From Barhan Kurgawa To Nagla Mansingh Road.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site spreading, grading to required slope and compacting to meet requirement of table 300-2. (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) |
| 2 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. / (i) For Grading I Material. (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) |
| 3 | Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.Sr No. 4.8 Ref No. 405/2 (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) |
| 4 | Tack Coat / Providing and applying tack coat with Bitumen VG-10 using emulsion pressure distributor @ the rate of 0.30 kg per sqm on the prepared non-bituminous surface (cement concrete pavement) cleaned with Hydraulic broom as per Technical Specification Clause 503. (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) |
| 5 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates (two third 13.2 mm and one third 11.2 mm grit) either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. / Case - II By Mechanical Means / (i) Bitumen (S-90) (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) |
| 6 | Seal Coat / Providing and laying seal coat sealing the voids in a bituminous surface laid to specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 / B. By Mechanical Means / Case - III : Type C / (I) Bitumen (S-90) (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) |
| 7 | Cement Concrete Pavement - Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501. (Including Supply of Material, Labour and T&P work complete as per direction of E/C. Including all taxes but excluding GST.) Note - 1. GST will be paid as per rule.2. Labour Cess 1% included in above rates and same will be deducted at the time of payment.3. Bitumen/ Emulsion will be issued to the contractor as per Schedule \\"C\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender