Tender For Repair/Maint To Flooring, Plinth Protection, Plastering And Other Connected B/R Work At Adm Area At Lansdowne
Tender Value
20 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
21 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint To Flooring, Plinth Protection, Plastering And Other Connected B/R Work At Adm Area At Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding/ terrazo dado etc (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L coloured glazed ceramic tiles 200 x 300 x 7mm/450 x 350 x7mm thick, on vertical surfaces such as skirting, dado and risers to steps etc set jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 as backing coat to receive wall tiles/skirting/dado complete all as specified and directed . |
| 3 | M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed. |
| 4 | M&L Vitrified Ceramic tiles double charge light colour 10 mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed. |
| 5 | -Ditto all as per Item No 04 above but as in skirting complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 7 | M & L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 8 | Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed |
| 9 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 10 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including rendering 10 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 11 | Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed |
| 12 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100 m complete all as specified and directed |
| 13 | M&L 75mm thick for PCC 1:3:6 type C-2 using 40 mm graded stone agg as in plinth protection finished even and fair complete all as specified and directed |
| 14 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed |
| 15 | Material & labour for Rendering 15 mm thick CM 1:6 on brick or concrete surfaces finished even & fair ccomplete all as specified and directed |
| 16 | M&L preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistent primer on walls complete all as specified and directed |
| 17 | M & L for Rendering 15mm thick on brick walling in CM (1:4) finished even and smooth w/o using extra cement complete all as specified and directed. |
| 18 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender