Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58553416

Tender For Provision Of Two Watch Towers And Renovation Of Old Sub Station Building At Ada Campus-Ii Under Ge(I) R& D East Bangalore.

Issued by Statutory Bodies & Commissions/Committees · Bengaluru Urban, Karnataka
Tender Value
27 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
19 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Two Watch Towers And Renovation Of Old Sub Station Building At Ada Campus-Ii Under Ge(I) R& D East Bangalore.

BOQ

Name of Work:- PROVISION OF TWO WATCH TOWERS AND RENOVATION OF OLD SUB STATION BUILDING AT ADA CAMPUS-II UNDER GE(I) R& D EAST BANGALORE.
Sl. No. Item Description
1Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm depth for all kinds of soil and disposal of rubbish, lead up to 50 m and lift up to 1.5 m complete all as specified and as directed.
2Earth work in excavation in any kind soil by mechanical means (Hydraulic excavator) / manual means as in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottom, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil to a distance of 15KM etc complete all as specified and as directed.
3Material and labour for Plain Cement Concrete 1:4:8 ( 1 cement : 4 coarse sand (zone -III) derived from natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources) etc, all as specified and as directed.
4Material and labour for steel reinforcement of RCC Work including straightening, cutting, bending, placing in position and binding using TMT bars of grade Fe-500D or more, below / above plinth level complete all as specified and as directed.
5Material and labour for cantering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases of columns, etc. for mass concrete, complete all as specified and as directed.
6Providing and laying cement concrete in columns, foundation 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.
7Returning and filling available excavated earth in trenches, plinth, sides of foundations etc, in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering for lead up to 50m and lift of all height complete all as specified and as directed.
8Material and labour for steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in positioniIn gratings, stringers, treads, landings, stair cases, including use of chequered plate, J Bolt, frames, guard bar, ladder, railings, brackets, gates and similar works and applying a priming coat of approved steel primer using structural steel etc, as required complete all as specified and as directed.
9Material and labour for painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, complete all as specified and directed.
10Providing and fixing frame size 65x100mm factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ clerestory windows and other frames/ chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200 N (Face) and 1100N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge.
11NOTE :- (i) For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable, variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) M.S hold fast/lugs or SS dash fasteners shall be paid for separately.
12Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.
13NOTE :- Stainless steel butt hinges and necessary S.S screws shall be paid separately.
14Providing and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, complete all as per architectural drawings and the directions of Engineer-In- Charge.
15NOTE :- (i) Glazing, paneling and dash fasteners to be paid for separately.(ii) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required and fittings shall be paid for separately.
16Providing and fixing for shutters of doors, windows and ventilators powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required complete all as specified and as directed. NOTE :- Fittings shall be paid for separately.
17Providing and fixing float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium window with EPDM rubber / neoprene gasket, etc, complete as per the architectural drawings and the directions of Engineer-in-charge. NOTE :- Cost of aluminium snap beading shall be paid in basic item.
18Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100x58x1.90 mm with stainless steel screws, etc, complete all as specified and as directed
19Providing and fixing aluminium tower bolts, 150mmx10mm dia ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, etc, complete all as specified and directed.
20Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.
21Providing and fixing aluminium sliding door bolts of size 250x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws, etc, complete all as specified and as directed.
22Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws, etc, complete all as specified and as directed.
23Providing and fixing aluminium hanging floor Twin rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete
24Supplying and fixing modular walls / roof with internal building finishes, monolithic, impervious, non-particle shredding, chemical resistant especially to hypochlorite cleaning and suitable to withstand chemical use during decontamination/ fumigation, modular wall should be made for clean room application, pre-engineered 50 mm thick PUF panels with PPGI Sheets with PUF insulation of minimum 38-40 kg/m3, both surfaces should be 0.6 mm thick PPGI sheet and has to be installed along the outer walls, partitions and false ceiling to create an impervious shell which is fully sealed, these panels must have good aesthetic appeal as well and have to be easily maintainable, extruded aluminium anodized R75 clip-on type (male & female connectors)
25covings for entire wall to wall & wall to ceiling joints, extruded aluminium double cove integrated with top track of the partition panels, corner internal & external cove joining pieces in aluminium anodized finish, having similar construction and finish as the walls and properly sealed with silicon sealant with wall & ceiling, covings used in construction shall include 90°Corner, Aluminium profiles, \\"C\\" Channel for wall panels, and with all required accessories complete all as specified and as directed.
26Material and labour for Moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
27Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-In- Charge.
28Material and labour for random rubble masonry in CM (1:6) with hard stone in walls or in simillar works, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) etc all as specified and as directed.
29Material and labour 15 mm thick plaster in CM (1:4) on fair faces of stone or brick walls , finishing the surfaces even and smooth without using extra cement etc all as specified.
30Dismantling Concertina Coils (including barbed wires any numbers) of any description and in any position etc complete all as specified and as directed.
31Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart with and including 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, complete all as per direction of Engineer-in-charge, with and including reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre complete all as specified and as directed.
32NOTE :- Cost of M.S. angle and C.C. blocks shall be paid separately.
33Earth work in surface excavation not exceeding 30 cm in depth and average 15 cm getting out in any kind of soil and disposal of excavated earth upto 15m and lift up to 1.5 m etc all as directed by Engineer-in-Charge:
34Material and labour for hardcore (broken stone boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface etc., complete all as specified and as directed.
35Material and labour for Plain Cement Concrete, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and as directed.
36Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-In- Charge.
37Material and labour for Plain Cement Concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as in kerbs of mud stops, borders, copings etc,. rounded or chamfered on edges, all as specified and as directed.
38Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground upto 15KM lead etc complete all as specified and as directed.
39Material and labour 10mm thick internal plaster in CM (1:6) on other than fair faces of walls complete all as directed by Engineer-In- Charge.
40Material and labour 5 mm thick plaster in CM (1:4) , as in ceiling complete all as directed by Engineer-In- Charge.
41Material and labour for distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour in new surfaces (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre etc complete all as specified and as directed.
42Material and labour for preparing new plastering surface of ceiling and applying three or more coat of white wash etc complete all as specified and as directed.
43Material and labour for preparation of surfaces and applying with 100% premium acrylic external emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, new work (two or more coats applied @ 1.43 litre/ 10 sqm, over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm etc complete all as specified and as directed.
44Material and labour for distempering old work ( with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand, shade and manufacturer including applying additional coats wherever required to achieve even shade and colour complete all as specified and as directed.
45Material and labour for preparing old painted surfaces of ceiling and applying two or more coat of white wash etc complete all as specified and as directed.
46Material and labour for complete removal of existing treatment and applying with 100% Premium acrylic external emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, old work (two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm etc complete all as specified and as directed.
47Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead having area 3 sq. metres and below complete all as specified and as directed.
48Providing and fixing pressed steel door frames (profile B) conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jambs, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers, fixing with adjustable lugs with split end tail to each jamb. as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-In- Charge.
49Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and as directed.
50Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer and of any description not otherwise described over 10cm width or girth complete all as specified and directed.
51Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium frame work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge.
52NOTE :- Glazing, paneling and dash fasteners to be paid for separately.
53Material and labour for fixing door chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
54Demolishing cement concrete nominal mix 1:3:6 or richer mix (i.e, equivalent design mix manually/ by mechanical means including disposal of material outside of MD land upto 15 KM and as per direction of Engineer-In- Charge.
55Providing and laying cement concrete in padding concrete over roof slab 40mm average thickness up to floor five level, using 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources) etc complete all as specified and as directed.
56Material and labour 10 mm thick cement plaster (1:4) in roof (1 cement: 4 fine sand) finishing the surface even and smooth without using extra cement complete all as specified and as directed.
57Providing and applying single component, GRIHA certified, water based eco-friendly high performance UV resistant elastomeric hybrid polyurethane coating, Dr. Fixit Roofseal Ultra without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat in 1st coat until all surface is covered, laying a 45 GSM fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition., allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat, ensure there are no pinholes or air bubbles on the membrane surface, applying second coat of Dr. Fixit Roof seal ultra without dilution spreading at the rate of 0.70 litre / Sq.mt /Coat to achieve total dry film thickness of 850 to 1000 microns at forced coverage at the rate of 1.40 litre / Sq.mt in 2 coats,
58the coating shall be done on entire horizontal area, upstands, vertical parapet wall etc.. This coating shall meet and exceed the ASTM D 6083 - 97a standard specification. Attains a Tensile strength of ≥ 4.00 N/mm2 with 45 GSM glass fibre mesh confirming to ASTM D 412; elongation at break ≥300% and crack bridging ability up to 3 mm, Solar Reflectance Index as per ASTM E 1980 – 105, Water permeability @5 bar – Nil as per EN12390 - 8:2019. Air cures the coating for 7 days. Priming : Providing, Mixing and applying 1 coat of Efflorescense resistant penetrating primer, Dr. Fixit Primerseal primer at a rate of 7.0 to 8.0 sq.mt / liter in the SSD condition. Allow the primer to dry for 4 hrs. Prior to application of Dr. Fixit Roofseal Ultra topcoat waterproof coating systems etc all as specified and as directed.
59Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete all as specified and as directed.
60Supply and fix in repairs to steel rolling shutters 1mm lath thickness, with out ball bearing, including top cover, anchoring rod, hasp and staple, safety lever lock and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle etc all as specified.
61Supply only ball bearing suitable for rolling shutters etc all as specified and as directed.
62Supply only helical spring for counter balancing the rolling shutter made out of high tension springs, 115mm bore and 600mm long complete all as specified and as directed.
63Dismantling wrought iron or mild structural steel work of any description and in any position etc all as specified and as directed.
64Material and labour for rolled mild steel work welded in built up sections/ framed work In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works using angle iron, flats, bars, plates / sheets etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553416
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 27 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Two Watch Towers And Renovation Of Old Sub Station Building At Ada Campus-Ii Under Ge(I) R& D East Bangalore.
Basic Detail
Tender No 8776/E8
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 16 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 27 Lakhs
Tender Fee 500
EMD 54000
Exemption Available
Document List
8776Tender.pdf
af527887-cb6f-4482-826a-f0c90ef9b3dc.html
BOQ_896368.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
pdf

8776Tender.pdf

html

af527887-cb6f-4482-826a-f0c90ef9b3dc.html

xls

BOQ_896368.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender