Tender For Provn Of 02 X Toilet Block Near Trg Area At No 2 Mt Bn annual maintenance contract cement concrete Under Ge (East) Lucknow
Tender Value
37.87 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
21 days left
EMD
75740
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 02 X Toilet Block Near Trg Area At No 2 Mt Bn annual maintenance contract cement concrete Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.5mtr wide and n.exc 1.5 mtr depth for forundation etc for shafts, walls, cesspits, etc n.exc 10Sqm on plan and n.exc 1.5 mtr in depth and getting out of soft soil complete all as specified and directed. |
| 2 | Excavation in trenches exc 1.5 mtr each additional 1.5m or part thereof in depth beyond the first 1.5 m wide and n.exc 1.5 mtr depth for forundation etc for shafts, walls, cesspits, etc n.exc 10Sqm on plan and n.exc 1.5 mtr in depth and getting out of soft soil complete all as specified and directed. |
| 3 | Returning, filling incl spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. |
| 4 | Removing excavated soil to a distance exc 1.50 km and n.exc 5.0 km and deposited where directed |
| 5 | M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed. |
| 6 | Surface excavating not exc 30 cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed |
| 7 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | M&L for TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 9 | M & L for use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of concrete complete all as specified and directed. |
| 10 | M & L for use & waste of formwork to side of pillar, posts, struts piers, columns and stanchions complete all as specified and directed. |
| 11 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 12 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 13 | M & L for RCC Design mix M25 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed. |
| 14 | M & L for Reinforced cement concrete M-25 in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 15 | M & L for RCC M-25 Beam, cantilevers, bressummers, lintels over 1.5m, chajja in shelves and the like complete all as specified and directed. |
| 16 | M&L for RCC M-25 Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and RCC chajja in shelves and the like complete all as specified and directed. |
| 17 | M & L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 18 | M & L for fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed. |
| 19 | M&L for Self Curing Ready Mix Plaster of thickness 10 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth complete all as specified and directed. |
| 20 | M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth complete all as specified and directed. |
| 21 | M&L for Self Curing Ready Mix Plaster of thickness 5 mm to 7 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on surfaces of Ceiling, chajja, facia at any height with necessary scafolding surface finished even and smooth complete all as specified and directed. |
| 22 | Material & Labour for preparation of new plastered surfaces of finished walls applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, all as specified and directed by Engineer-in-charge. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means) |
| 23 | M & L for applying minimum 2mm thick wall care water proofing putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. |
| 24 | M&L for Smart Periodical Services with two coats of premium plastic emulsion paint over and including one coat of approved primer, executed exclusively through the Authorized Company's Authorized Applicator in accordance with the approved MoU, manufacturer's specifications, complete as specified and directed by the Engineer-in-Charge |
| 25 | M & L 18 to 20 mm thick machine cut Kota stone slab flooring over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mmx550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 26 | M & L for glazed ceramic joint free coloured premium quality tiles in vertical surfaces 600x300x7-8mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 27 | M & L for coloured Non Skid ceramic jointless premium quality tiles coloured 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed. |
| 28 | M&L for 16 to 18mm thick black / green granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and partition of urinal and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed. |
| 29 | M & L for cement concrete 1:2:4 type B-0, (12.5mm graded crushed stone aggregate) 25 mm thick flooring for laying below non-skid ceramic tilels complete all as specified and directed. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 31 | M & L for providing and fixing of factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 32 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge, complete all as specified and directed. Note:(a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made The work for wpc frame shall include the following and rates quoted by bidder shall include same. (b) The work pertaining to wpc frame shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like WPC frame, SS screw etc after approval by the GE. |
| 33 | S&F powder coated(min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glass and ss wiremess of dia 0.36mm and aperture 1.4mm thick all as specified and directed. Ref drg no celz/c-td/151 sheet no 1/1 & 2/2 .Note- 1. Glazed shutter glass thickness not less than 5mm and ss wiremess shutter with ss wiremesh as approved by GE is also included. No payment will be made separately.2. No extra payment will be made for section profiles of higher sizes. |
| 34 | S & f powder coated aluminum ventilator ( louvers) shutter with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings with stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed |
| 35 | M & L for framed work such as grills,gratings, etc.. with ends of bars,shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed. |
| 36 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide/zinc chrome primer complete all as specified. |
| 37 | S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified and directed. |
| 38 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed. |
| 39 | S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed. |
| 40 | S&F Aluminium handles cast type anodised of 150mm complete all as specified and directed. |
| 41 | S & F Stainless Steel sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 42 | S&F 140 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with rubber ends complete all as specified |
| 43 | S&F health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible metal tube and ABS wall hook/holder including macking connections and fixed in position complete all as specified and directed. |
| 44 | S&F for toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified & directed. |
| 45 | S&F PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed. |
| 46 | S&F wash hand basins vitreous china, coloured in oval shape of size 450 x300x 150 fixed in granite stone complete all as specified and directed.. |
| 47 | S&F vitreous china wash down water closet pan pedestal pattern, including P/S trap and connection to drain (or outgoing pipe) including pvc seat cover, flushing cistern and flush pipe complete all as specified and directed. |
| 48 | S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed. |
| 49 | S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 50 | S&F in repairs Size 310X700 White Vitreous china urinal partition slab and terminating about 40cm above floor line complete all as specified and directed. |
| 51 | S & F 600mm x 450mm looking mirror, bevelled edge, of selected quality glass, mounted on 6mm th AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 52 | S&F of 15mm CP bib tap long body pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified. |
| 53 | S&F 15mm bore pillars taps fency type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed. |
| 54 | S&F 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 55 | S&F angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 56 | S&F PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 57 | S & F tubular towel rail, brass chromium plated 20 mm dia ,D type,60 cm long between flanges complete all as specified and directed at site. |
| 58 | S&F sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete. |
| 59 | S&F Soap dish of fancy oval shape type all as specified |
| 60 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed. |
| 61 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed. |
| 62 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 63 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 64 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 65 | S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 66 | M&l for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete type B-1 (1:2:4) as specified |
| 67 | S&F PVC (SWR) reducers 75/110mm bore complete all as specified and directed. |
| 68 | S&F CP grating doom 100 mm dia chromium plated all as specified and directed. |
| 69 | S&F, 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. |
| 70 | S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed |
| 71 | S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks triple layred (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including lid cover complete all as specified and directed. |
| 72 | S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed. |
| 73 | S & F gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm dia all as specified and directed. |
| 74 | S&F 20mm CPVC of Outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings tee, elbow & bends on walls/ceiling or laying in grade with all fitting and fixed( Concealed Type)complete to walls and ceiling or laid in floor all as specified and directed. |
| 75 | S&F 25 mm CPVC of Outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings tee, elbow & bends on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 76 | S&F CPVC 20mm Brass Elbow to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 77 | S&F CPVC 25mm Brass Elbow to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 78 | S&F CPVC 20mm Brass Tee to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 79 | S&F CPVC 25 mm Brass Tee to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 80 | M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cm 1 : 3 width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed. |
| 81 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 2.50 mtr long all as specified and directed by engr-in-charge. |
| 82 | M & L for forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade \\"A\\" complete all as specified and directed. Please Enable Macros to View BoQ information |
| 83 | M & L for forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade \\"A\\" complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender