Tender For special Repair Of Cook House (Bldg No P-119 And P-120) Of No 2 Tt Wg annual maintenance contract cement concrete Under Ge (East) Lucknow
Tender Value
38.73 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
21 days left
EMD
77460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Cook House (Bldg No P-119 And P-120) Of No 2 Tt Wg annual maintenance contract cement concrete Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed |
| 2 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 3 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n. exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 4 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 5 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 6 | M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 7 | M&L for Self Curing Ready Mix Plaster of thickness 05 mm to 07 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Ceiling surfaces , chajja, facia at any height with necessary scafolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. |
| 8 | M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. |
| 9 | M&L for Self Curing Ready Mix Plaster of thickness 10 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. |
| 10 | M & L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in leveling course in floors complete all as specified and directed. |
| 11 | M & L for non skid ceramic coloured premium quality tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 12 | M & L for glazed ceramic coloured premium quality tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L for calibrated Pre Mirror Polised Machine cut kota stone ready to fix of 18-20 mm thick the Kota stones are made having a corrugated-like appearance by grooving with machines at back side from the factory and laid over cement mortar screed base of 20 mm thick in CM 1:6, as in floors ,laid and jointed with grey cement slurry mixed with pigment to match the shade and dismantling of old kota stone complete all as specified and as directed. |
| 14 | All as per item No 13 above but in skirting / steps / risers of reqd size, laid in 15mm thick screed bedding in cement mortar 1:4 , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 15 | S&F pressed steel frames of size 105 x 60mm for doors with one or more rabtes including necessary fixing lugs, hinges, lock strike plate, etc ocmplete all as specified and directed. |
| 16 | S&F pressed steel frames of size 125x60mm for doors with one or more rabtes including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 17 | Supply and fixing factory made per-laminated flush shutters, 35 mm thick, commercial type exterior grade, constructed with block board core (solid/engineered wood) sandwiched between plywood panels and bonded under high pressure and heat using approved synthetic resin, with shutters laminated on both faces with 0.9–1.0 mm thick decorative high-pressure laminate (HPL) of any approved colour and pattern by GE pressed over plywood surface, edges fully lipped on all four sides with 5 mm thick hardwood beading, including all materials, labour, tools and tackles, fixing, alignment, levelling and making good, complete in all respects as per specifications, drawings and directions of the Engineer-in-Charge. |
| 18 | S&F IInd class HW, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 19 | S&F solid PVC frame (Single Rebated ) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed. |
| 20 | S&F factory made solid PVC profiled panel door shutter 28mm thick with intergal skin as frame & 3mm thick high pressure compact laminate on both side of approved colours as infill , with C type GI or 40 x20 x19 of MS pipe as stifffiner & supplying & fixing in frame at site as sper specifications & drawing complete all as specified and directed. |
| 21 | S & F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and pelment boxes, cupboard, shelves etc all as specified and directed. |
| 22 | S&F continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed. |
| 23 | S&F in repairs PVC coated, MS curtain rods 22-25mm dia with and including fixing of two Nos MS brackets fancy type by drilling brass screws on wall in PVC beads and decorative type PVC knobs / lattoo chromium plated at both ends of curtain rod all as specified and directed. |
| 24 | S & F of framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars ; barred iron doors ; ladders; framed balusters; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 25 | S & F in repair Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 26 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed. |
| 27 | Hacking out old broken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing complete all as specified and directed. |
| 28 | S&F 3mm thick glass, ordinary quality, fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 29 | S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed. |
| 30 | S&F 100mm butt hinges stainless steel SS-304 grade with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed. |
| 31 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed. |
| 32 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 33 | S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 34 | S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed. |
| 35 | M & L for cutting holes in brick walls (exc half brick but not exc one brick) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed. |
| 36 | M & L for mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290 , Gde -165 complete all as specified and directed. |
| 37 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 38 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 39 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 40 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 41 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 42 | S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 43 | Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 44 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 45 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 46 | S&F in repair tubular towel rail, chromium plated brass 20mm dia 'D\\" type 60cm long between flanges complete all as specified and directed. |
| 47 | S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 48 | S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 49 | S&F in repairs 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 50 | S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 51 | S&F vitreous China \\"Orissa pattern\\" size 580 x 440mm\\" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing including dismantling of old water closet with fittings complete all as specified and directed. |
| 52 | Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed. |
| 53 | Taking down 100mm / 75mm dia AC rain water pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories) |
| 54 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed. |
| 55 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed. |
| 56 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 57 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 58 | S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 59 | S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 60 | S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 61 | M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with sealing compound grade 'A' complete all as specified and directed. |
| 62 | S&F in repair new rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed. |
| 63 | M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 64 | M&L for preparation of old painted steel and iron surfaces of any description over 10CM width or girth and applying one coats of synthetic enamel paint over a coat or red oxide primer complete all as specified and directed. |
| 65 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 66 | M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 67 | S & F in repairs 15mm bore pillars taps fency type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed. |
| 68 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 69 | S&F in repair soap dish, any type fixed to plugs with chromium plated brass screws completed all as specified and directed. |
| 70 | Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 150 Mtrs but n. exc 250 Mtrs away complete all as specified and directed. |
| 71 | M&L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete all as specified and directed. |
| 72 | S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 73 | S&F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed. |
| 74 | S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed. |
| 75 | S&F steel door with 1.25mm thick plain MS sheet including projectiong type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directe |
| 76 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 77 | S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed. |
| 78 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed. |
| 79 | M&L for waterproof cement based putty @ 1 Kg (undiluted ) per Sqm of average thickness 1 mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism ) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSINotes: Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU. |
| 80 | M&L for one coat of acrylic water based exterior grade primer @ 0.9 Ltr (undiluted )/10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.Note : Same as mentioned in item No 79 above. |
| 81 | M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti fungal properties in two coats @ 1.79 Ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note : The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e Paint, Distemper, Cement base paint, putty etc is proposed to be used by the contractor and approved by Garrison Engineer. Note : Same as mentioned in item No 79 above. |
| 82 | M & L for preparation of new/old wall surfaces and applying two coats of oil bound distemper over a coat of primer over1mm thick Birla white wall care putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed |
| 83 | M & L for preparation of old /newly decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed. |
| 84 | M & L for preparation of old /newly decorated plastered or un-plastered surface on ceiling surfaces, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coats of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed. |
| 85 | Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 86 | M & L for 18 to 20mm thick black / green granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed. |
| 87 | Dismantling / taking down existing unserviceable RCC/PVC S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed |
| 88 | S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed. |
| 89 | S&F in repair 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 90 | S&F in repair 20mm bore Gun Metal, globe or gate valves, with iorn wheel head, screwed both ends or iron pipe and fixed complete all as specified. |
| 91 | S&F in repair 25mm bore Gun Metal, globe or gate valves, with iorn wheel head, screwed both ends or iron pipe and fixed complete all as specified. |
| 92 | M & L for 75mm thick PCC type D-2 (1:4:8) using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 93 | M & L for chequered coloured cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry with mixture of white & grey cement and pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 94 | S&F in repair wash hand basins vitreous china, coloured in oval shape of size 450 x300x 150 fixed in granite stone complete all as specified and directed.. |
| 95 | S&F in repairs sinks without drainage board made of stainless steel 1mm thick kitchen with plugs washers and waste pipe, etc complete, including bedding in cement mortar to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 495mmx420mm bowl 410mm x 330mm x160mm complete all as specified and directed. |
| 96 | M & L for cement concrete type C1 1:3:6 using 20 mm graded crushed stone aggregate in surface channels and drains complete all as specified and directed. |
| 97 | M & L for PCC 1:3:6 type C1 using 20mm grade crushed stone aggregate for coping complete all as specified and directed. |
| 98 | M & L for striping out old roof treatment (tarfelt) from roof top and removing from site,icluding perparation of roof for reciveing roof treatment complete all as specified and directed. |
| 99 | M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs/padding/benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc all as specified and directed. Please Enable Macros to View BoQ information |
| 100 | M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs/padding/benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
TodayDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender