Defence Statutory Bodies & Commissions/Committees Closing in 21 days TDR #58553393

Tender For Repair, Painting And Recanning Of Steel Furniture At Af Stn Kumbhirgram.

Issued by Statutory Bodies & Commissions/Committees · Cachar, Assam
Tender Value
7 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
21 days left
EMD
14000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair, Painting And Recanning Of Steel Furniture At Af Stn Kumbhirgram.

BOQ

Name of Work:- REPAIR, PAINTING AND RECANNING OF STEEL FURNITURE AT AF STN KUMBHIRGRAM.
Sl. No. Item Description
1CHARPOY GI PIPE WITH PLY TOP (FD-220)
2Supply and fix 12 mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe fixed with mild steel Screw bolt (Machine made) of size 75 mm long, 6 mm thick with hexagonal or square head at one end and screw at other end with washer, including removal of old unserviceable ply top complete all as per specified and directed.
3Material and labour for dismantling of existing unserviceable elbow GI three way and Supply and fix new elbow GI three way suitable for GI Pipe medium grade 32 mm bore pipe complete all as specified and directed .
4Supply and fix new long rail made of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends including dismantling of existing unserviceable / broken long rail and complete all as specified and directed.
5Supply and fix new short rail made of GI pipe medium grade 32 mm size bore duly ISI marked including threading at both ends including dismantling of existing unserviceable / broken short rail and complete all as specified and directed.
6Supply and fix new leg made of GI pipe medium grade 32 mm size bore duly ISI marked including threading at one ends with 3mm thick base MS circular plates of 55mm dia including dismantling of existing unserviceable / broken leg and complete all as specified and directed.
7Supply and fix flat MS iron of size 50mmx6mm thick , 900 mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws / suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed .
8Supply and fix in repair check nut 6 mm thick suitable for 32 mm bore GI pipe charpoy complete all as specified and directed .
9Supply and fix flat MS iron of size 50mmx6mm thick, 75 mm long duly holed /drilled for tightening plywood and strip with countersunk screws / suitable nuts & bolts with washers and welded to rails of charpoys each side 2 Nos strips including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed.
10CHAIR VERANDAH (FD-256)
11Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic white cane as shown on drg and complete all as specified and directed.
12Material and labour for spray painting of chair steel frame with two coat of synthethic enamel paint of white shade after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding as shown on drg and complete all as specified and directed.
13Material and labour for gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder as shown on drg and complete all as specified and directed.
14TABLE OFFICE CLERK STEEL FD-1004
15Removing unserviceable top of table office clerk, Supply and fix new top made out of 18/19 mm thick exterior grade MDF board of approved shade with pvc tape beading 2mm thick/ teakwood beading of 4mm on all sides including welding of loose joints of existing frame before fixing the top, shape and size all as shown on drg and complete all as specified and directed.
16Supply and fix in repair new drawers with appropriate size of sheet as per existing, with locking device and handles as per drg and complete all as specified and directed.
17Supply and fix in repair new drawers with appropriate size of sheet and handles as per existing as per drg and complete all as specified and directed.
18Material and labour for denting / bending/ rewelding, repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and spray painting two coats of synthetic enamel paint of approved shade as per speciaification and as shown on drg and complete all as specified and directed.
19TABLE OFFICE OFFICER STEEL FD-1003
20Removing of unserviceable top of table officer, Supply and fix new top made out of 18/19 mm thick exterior grade MDF board of approved shade with pvc tape beading 2mm/ teakwood beading of 4 mm on both sides including welding of loose joints of existing frame before fixing the top, shape and size all as shown on drg and complete all as specified and directed.
21Supply and fix in repair new drawers with appropriate size of sheet as per existing, with locking device with handles as per drg and complete all as specified and directed.
22Supply and fix in repair new drawers with appropriate size of sheet as per existing and handles, as per drg and complete all as specified and directed.
23Material and labour for dismantling of existing unserviceable shutter of Table and Supply and fix new shutter fitted with locking device & MS butt hinges as per drg and complete all as specified and directed.
24Material and labour for denting/ bending/ rewelding, repairs of broken joints, drawers of table officer and removing of existing coat of paint on steel parts by scraping, filling and spray painting two coats of synthetic enamel paint of approved shade as per speciaification and as shown on drg and complete all as specified and directed.
25TABLE STEEL WITH DRAWER 3' x 2'- FD-1008
26Removing unserviceable top of table steel with drawer, Supply and fix new top made out of 18/19 mm thick exterior grade MDF board of approved shade with pvc tape beading 2mm thick/ teakwood beading of 4mm on all sides including welding of loose joints of existing frame before fixing the top, shape and size all as shown on drg and complete all as specified and directed.
27Supply and fix in repair new drawers with appropriate size of sheet as per existing, with locking device and handles shown on drg and complete all as specified and directed.
28Supply and fix in repair new drawers with appropriate size of sheet and handles as per existing as shown on drg and complete all as specified and directed.
29Material and labour for denting / bending/ rewelding, repairs of broken joints, drawers of table and removing of existing coat of paint on steel parts by scraping, filling and spray painting two coats of synthetic enamel paint of approved shade as per speciaification and as shown on drg and complete all as specified and directed.
30Chair CB steel with Arms (FD-75 M)
31Removing the existing worn out/ unserviceable seat of chair CB steel and Supply & fix new seat frame duly caned in godrej pattern as per drawing complete all as specified and directed.
32All as per item No. 6.10 above but for Back of Chair CB steel and .-ditto-.
33Material and labour 25 x 3 mm MS flat iron 510 mm long fixed with welding having holes to fix nuts and bolts to seat/back frame for fixing sheet/back frame complete all as specified and directed.
34Supply and fix new PVC rubber stopper as approved by AGE (I) / Engr-in-Charge.
35Supply and fix new arms as shown on drawing complete all as specified and directed.
36Material and labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces and applying two coats of synthetic enamel paint of approved shade by spraying machine complete all as specified and directed.
37ALMIRAH SMALL STEEL FD-1032
38Material and labour for dismantling of unserviceable bottom legs, Supply and fix of new bottom legs made of 1mm thick MS sheet including welding and finishing with mild grinding complete all as specified and directed.
39Material and labour for dismantling of unserviceable shelves, Supply and fix of new shelves made of 1mm thick MS sheet including welding and finishing with mild grinding complete all as specified and directed.
40Material and labour for dismantling of unserviceable locking assembly with complete mechanism and Supply and fix new MS locking assemly with base plate (Complete mechanism) with upper and lower bars with lock as shown in drg and complete all as specified and directed.
41Material and labour for denting/ bending/ welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints of almirah meduim and filling, finishing and spray painting of Almirah Medium steel with two coats of synthetic enamel paint of existing colour complete all as specified and directed.
42CHAIR COMPUTER (FD/E6/MAP/01)
43Removing the existing worn out/ unserviceable seat of chair computer and Supply and fix new seat frame made from commercial plywood 12 mm thick and 50 mm thick 32 D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched with pvc lipping complete all as specified and directed.
44All as per item No. 8.10 above but for Back of Chair Computer and .-ditto-.
45Removing of unserviceable arms and Supply and fix new arms with nuts and bolts as shown on drg and complete all as specified and directed.
46Removing of unserviceable hydraulic , Supply and fix new hydraulic as shown on drg and complete all as specified and directed.
47Removing of unserviceable wheel base , Supply and fix new wheel base with tween wheel castor as shown on drg and complete all as specified and directed.
48TABLE COMPUTER (FD/E6/MAP/03)
49Removing of unserviceable top of Table computer and Supply and fix new top made out of 18/19 mm thick exterior grade prelaminated MDF board of existing shade with 2mm thick PVC edging fixed with steel corner bracket complete all as specified and directed.
50Supply and fix new drawer made of 18/19mm thick exterior grade prelaminated MDF board as shown on drg complete all as specified and directed.
51Removing of unserviceable channels in any position, Supply and fix new steel channels with screws as shown on drg complete all as specified and directed.
52Supply and fix new SS handles for drawers of approved shape and size as shown on drg complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553393
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 7 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair, Painting And Recanning Of Steel Furniture At Af Stn Kumbhirgram.
Basic Detail
Tender No 8791/KUM/AF/E8 OF 2026-27
Bidding Type Tender
Location
City Cachar
State Assam
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 7 Lakhs
Tender Fee 500
EMD 14000
Exemption Available
Document List
82c0d8b0-4ef7-4210-a270-c52f7b38ad3d.html
BOQ_896354.xls
Tenderdoc8791.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 21 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

82c0d8b0-4ef7-4210-a270-c52f7b38ad3d.html

xls

BOQ_896354.xls

pdf

Tenderdoc8791.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender