Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58553389

Tender For Repair/Maint To Windows, Glass Panes, Wire Mesh And Other Misc Joinery Work At Offrs Md Accomodation At Lansdowne

Issued by Statutory Bodies & Commissions/Committees · Pauri Garhwal, Uttarakhand
Tender Value
28 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
20 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/Maint To Windows, Glass Panes, Wire Mesh And Other Misc Joinery Work At Offrs Md Accomodation At Lansdowne

BOQ

Name of Work:- REPAIR/MAINT TO WINDOWS, GLASS PANES, WIRE MESH AND OTHER MISC JOINERY WORK AT OFFRS MD ACCOMODATION AT LANSDOWNE
Sl. No. Item Description
1Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete all as specified and directed.
2Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed.
3S&F factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each complete all as specified and directed.
4S&F factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area exceeding 2.00 sqm each complete all as specified and directed.
5S & F factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) Area exceeding 2.00 sqm each complete all as specified and directed.
6S & F 5.00 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.
7S & F for Stainless steel wire cloth of 0.36 mm dia wire and average width of aperture 1.40 mm & fixed with tacks of stainless steel wire staples etc complete all as specified and as directed.
8Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and directed.
9Material & Labour for Rendering 15 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
10Material & Labour for preparation of new surface of internal wall and applying two coats of oil emulsion distemper over one coat of primer complete all as specified and directed.
11S&F in repairs 19/20 mm dia anodised alloy chromium plated curtain rod with and including fixing brackets and socket one pair in each rod (as approved by AGE (I)/complete all as specified and directed.Note: - Measurement will be taken between end point of knobs.
12S&F in repair aluminium body door closer hydraulically regulated, designation No -1, universal type,aluminium(Die cast body) suitable for door shutter (ISI marked) complete all as specified and as directed.
13M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in bed block for fixing of hold fast, including necessary formwork complete all as specified and directed.
14Demolition of wall and ceiling boards ( fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness, including cover fillets complete all as specified and directed.
15S & F 12 mm thick semi perforated micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e dash fasteners, 6mm dia fully threaded hanger rod upto 1 000 mm length and Lshape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed.
16Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings complete all as specified and directed.
17S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50 mm thick of colour, as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
18S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved having tensile strength of 550 Mpa, AZ-150 as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553389
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 28 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Maint To Windows, Glass Panes, Wire Mesh And Other Misc Joinery Work At Offrs Md Accomodation At Lansdowne
Basic Detail
Tender No 87356/LDN/E8
Bidding Type Tender
Location
City Pauri Garhwal
State Uttarakhand
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 15 Dec 2026
Finance
Tender Value 28 Lakhs
Tender Fee 500
EMD 56000
Exemption Available
Document List
21a5c10a-f160-422b-abde-b0b8165c7eb7.html
BOQ_896302.xls
Tender87356.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 28 days

Tender Documents

Download All (ZIP) ↓
html

21a5c10a-f160-422b-abde-b0b8165c7eb7.html

xls

BOQ_896302.xls

pdf

Tender87356.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender