Drinking Water Supply and Sanitation Government Departments Closing in 8 days TDR #58553206

Tender For Fabrication And Machinary Job Work Under Juridication Phed Distt Sub Dn Sikar I(Bsr Phed 2019)

Issued by Government Departments · Sikar, Rajasthan
Tender Value
2 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
4000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sikar → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Fabrication And Machinary Job Work Under Juridication Phed Distt Sub Dn Sikar I(Bsr Phed 2019)

BOQ

Name of Work:- FABRICATION AND MACHINARY JOB WORK UNDER JURIDICATION PHED DISTT SUB DN SIKAR I(BSR PHED 2019)
Sl. No. Item Description
1Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost.
280mm dia
3100 mm
4125mm dia
5150mm dia
6200mm dia
7250mm
8300mm
9350mm
10400mm
11Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store own his cost.
1280mm dia
13100mm dia
14125mm dia
15150mm dia
16Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department.
1780mm dia
18100mm dia
19125mm dia
20150mm dia
21200mm dia
22250mm
23Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job.
24At work shop
25On site
26Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
27Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate
28Upto 12mm dia Hole
29Above 12mm dia Hole
30Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concern's divisional store own his cost.
3180mm dia
32100mm dia
33Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes.
34Sluice Valve Size 80mm
35Sluice Valve Size 100mm
36Sluice Valve Size 125mm
37Sluice Valve Size 150mm
38Sluice Valve Size 200mm
39Sluice Valve Size 250mm
40Sluice Valve Size 300mm
41Sluice Valve Size 350mm
42Sluice Valve Size 400mm
43Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes.
44Sluice Valve Size 80mm
45Sluice Valve Size 100mm
46Sluice Valve Size 125mm
47Sluice Valve Size 150mm
48Sluice Valve Size 200mm
49Sluice Valve Size 250 mm
50Sluice Valve Size 300 mm
51Sluice Valve Size 350 mm
52Sluice Valve Size 400 mm
53Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes.
54Sluice Valve Size 80mm
55Sluice Valve Size 100mm
56Sluice Valve Size 125mm
57Sluice Valve Size 150mm
58Sluice Valve Size 200mm
59Sluice Valve Size 250mm
60Sluice Valve Size 300mm
61Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes.
62Sluice Valve Size 80mm
63Sluice Valve Size 100mm
64Sluice Valve Size 125 mm
65Sluice Valve Size 150mm
66Sluice Valve Size 200mm
67Sluice Valve Size 250mm
68Sluice Valve Size 300mm
69Sluice Valve Size 350mm
70Sluice Valve Size 400mm
71Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm).
722\\" dia. Size (50 mm)
732 ½\\" size (65 mm)
743\\" dia size (80 mm)
754\\" dia size (100 mm)
76Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm).
772x2 ½ “ dia size (50 x 65 mm)
782 ½ “x 3” dia size (65 x 80 mm)
792”x 3” dia size (50 x 80 mm)
803”x 4” dia size (80 x 100 mm) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58553206
AUTHORITY Government Departments
TENDER VALUE 2 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Public Health Engineering Department
Work Description Tender for Fabrication And Machinary Job Work Under Juridication Phed Distt Sub Dn Sikar I(Bsr Phed 2019)
Basic Detail
Tender No 74-77
Bidding Type Tender
Location
City Sikar
State Rajasthan
Key Dates
Publish Date 16 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 2 Lakhs
Tender Fee 500
EMD 4000
Exemption Available
Document List
2f0254b6-6432-458d-b417-3094cdc86877.html
BOQ_1074739.xls
TD77MachinearyworDHOD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

2f0254b6-6432-458d-b417-3094cdc86877.html

xls

BOQ_1074739.xls

pdf

TD77MachinearyworDHOD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender