Tender For Plumbing Work For Mlt Lab At 3W, Svsu Campus
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
2850
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Plumbing Work For Mlt Lab At 3W, Svsu Campus
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 50 mm (2`) dia. PVC pipe of approved quality, including all necessary PVC fittings such as bends, tees, sockets, unions, reducers, etc., jointed with approved solvent cement, including PVC clamps/supports, making suitable chases in walls wherever required, fixing the pipe duly aligned and levelled, and subsequently filling, repairing and finishing the chases with cement mortar to match the existing surface, complete in all respects as directed by the Engineer-in-Charge. (NS ITEM 1) |
| 2 | Providing and fixing 15 mm dia. PVC connection pipe, 36` (900 mm) long, of approved make and quality, suitable for sanitary/water supply connections, complete with all necessary end fittings, connectors, nuts, washers, seals and accessories, properly connected to the existing/new water supply line and sanitary fixture, including cutting, jointing, tightening, testing for leakage and making the installation complete in all respects as directed by the Engineer-in-Charge.(NS ITEM 2) |
| 3 | Providing and applying PTFE (Teflon) thread sealing tape of approved make and quality, suitable for sealing threaded joints of water supply, sanitary and plumbing installations, applied properly on the male threads before making the threaded connection, including cleaning of threads, cutting and wrapping the tape to ensure a leak-proof joint, complete in all respects as directed by the Engineer-in-Charge.(NS ITEM 3) |
| 4 | [10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm [Through Rate] |
| 5 | [2.B0239] B0239. PVC Bend 100 dia [Rate] |
| 6 | [2.B0241] B0241. 100 mm dia PVC pipe [Rate] |
| 7 | [20.7.3]Stringing out A.C./P.V.C pipes and specials casting along trenches and laying the same in trenches, to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores. 3. 100 mm internal diameter of pipe line laid complete [Through Rate] |
| 8 | [22.125]Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms [Through Rate] |
| 9 | [22.173.1]Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 1. With common burnt clay non-modular bricks of class designation 7.5 [Through Rate] |
| 10 | [22.86.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes [Through Rate] |
| 11 | [22.86.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes [Through Rate] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender