Tender For Provision For Layng Of 100Mm Dia 150 Mm Dia Di Pipe Line At Different Uncovered Areas For Providing Each House Hold With Piped Water Supply In Rajgangpur Town
Tender Value
70.46 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
70460
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Layng Of 100Mm Dia 150 Mm Dia Di Pipe Line At Different Uncovered Areas For Providing Each House Hold With Piped Water Supply In Rajgangpur Town
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all labour and T & P for earth work excavation in trenches for pipe line in all kind of soil within 50 m initial lead & 1.50 mtr. Initial lift including rough dressing and breaking of clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.30 m in depth as per the Direction of Engineer-in-Charge. |
| 2 | Supplying all labour, T&P and laying in trenches Centrifugally Cast (Spun) ductile Iron pressure, socket and spigot pipes Class K-9 / K-7 with cement mortar lining and bituminus painting conforming to IS:8329-2000 of the following nominal diameter including cost of pipe and rubber ring as per specification complete. (Earthwork intrenches to be measured and paid for separately) |
| 3 | 100 mm Dia. D.I.Pipe (Class-K-7) |
| 4 | 150 mm Dia. D.I.Pipe (Class-K-7) |
| 5 | laying in trenches C.I/D.I specal conforming to I.S-1538 of the following diameter as per PH specification including carriage of materails from store to work site etc complete ( excluding earth work in excavation, jointing but including cost of special) For cost of fittings of 100mm dia K-7 & 150 mm dia K-7 pipe |
| 6 | Cost of fittings 5% of the pipe weight |
| 7 | Supplying all labour,T&P, materials and making Push - on joints confirming to IS:3114 - 1994 Centrifugally (Spun) cast iron or Ductile iron pipes using Rubber Gaskets confirming to IS: 5382 of S.B.R quality including cost testing of joints, etc. all complete as per specification |
| 8 | 100 mm Dia. Joint |
| 9 | 150 mm Dia. Joint |
| 10 | Supplying all labour,T&P, materials for laying of M.S.Pipes of all classes of the following outside diameter including one coat priming and two coat enamel painting as per specification complete including cost of M.S. pipe and specials. |
| 11 | 114.30mm OD M.S.Pipe (4.50mm thickness) |
| 12 | 168.3 mm OD MS pipe ( 4.50 mm thickness) |
| 13 | 100 mm dia 900 M.S. plain bend |
| 14 | 150mm dia 900 M.S. plain bend |
| 15 | 100 mm dia MS Flang |
| 16 | 150 mm dia MS Flang |
| 17 | Supplying all labour, materials and T&P for flame cutting through gas cutter and facing of MS plate up to 8 mm thick at worksite as per the direction of the Er-in-charge. |
| 18 | Supplying all labour,T&P, materials for providing joints by welding with two welding beads/pass confirming to IS:816 - 1998 (Fillet welding) to MS Pipes and fittings at site by using welding generator including testing of joints, as per specification and direction of the Er-in-charge. |
| 19 | Supplying all labour, T&P, materials for fitting and fixing of flanged joints to flanged cast iron pipes and fittings of the following nominal diameter including testing of joints, cost of M.S flange, bolts and nuts and rubber insertion as per specification all complete |
| 20 | 100mm dia M.S Flange |
| 21 | 150mm dia M.S Flange |
| 22 | Supplying all labour,T&P, materials for fixing of DI Mechanical Joint collar to flanged ends of Cast Iron pipes or Ductile iron pipes of the following nominal diameter including testing of joints and cost, all taxes, carriage & conveyance of all materials to the work as per specification etc. all complete as per the direction of Engineer - in - charge. |
| 23 | 100mm dia D.I. mechanical joint socket |
| 24 | 150mm dia D.I. mechanical joint socket |
| 25 | Suppling all labour and T&P for filling of foundation trenches with excavated materials as per direction of the Engineer-in-Charge. |
| 26 | Supplying all materials, labour and T&P fitting and fixing of cast iron / D.I. sluice Valve/non return valve with double flanged ends for water work purposes as per specification for the following rating and nominal diameter including testing and supply all sluice Valve/non return valve, nut and bolts, ruber insertion etc. all complete as per direction of Engineer-in-Charge. |
| 27 | 100 mm dia DI Resilient Seated Glandless DI Sluice Valve PN 1.6 |
| 28 | 150 mm dia DI Resilient Seated Glandless DI Sluice Valve PN 1.6 |
| 29 | 25 mm dia DI Tamper Proof Kinetic Air Valve |
| 30 | Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75\text{ Kg/cmsq}. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including RCC cover slab (1:1.5:3) to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. |
| 31 | Sluice Valve Chamber for 100mm to 150mm dia pipe line of size (0.90m x 0.90m x 1.20mtr) |
| 32 | Supplying all labour, materials and T&P for cutting metaled / asphalt or bituminous / cement concrete road for taking the pipe line through etc all complete as per specification and direction of the Engineer-in-charge. |
| 33 | Cutting WBM road (Mannually) |
| 34 | Cutting asphalt road (Mannually) |
| 35 | Cutting concrete road (Mannually) |
| 36 | Supplying all labour, T&P, materials and making good to the damaged asphalt and cement concrete road with following items. |
| 37 | Supplying filling foundation & plinth with sand well watered & rammed including cost, conveyance, royalities, taxes all labour etc all complete as per pecification and direction of Engineer-in-charge. |
| 38 | Supplying all labourT&P for providing Cement concrete (1:3:6) with 40mm. size hard granite Cruser Broken metal including cost of labour mterial with all taxes, lead T&P etc all complete . |
| 39 | Supplying all materials labour T&P for providing Cement concrete (1:2:4) with 12mm size C.B.H.G chips, in flooring including hosting and laying etc all complete as per specification and direction of Engineer-in-charge. |
| 40 | Supplying all labour, T&P, materials for construction of R.C.C thrust block including earth work in excavation, back filling in 150mm layers, watering & consolidating, pumping & bailing out water, shoring, strutting & planking as required, disposal of surplus earth, dressing the site etc.all complete as per the direction of the Engineer-In-Charge. |
| 41 | 100-150 mm dia pipe |
| 42 | Dewatering with using of 5HP disel pump including cost of POL, |
| 43 | 100-250 mm dia pipe |
| 44 | Conveyance of surplus earth from work site and depositing the excavated materials away from the work site as per the specification and as directed by the the Engineer-in-chrge. Carriage of extra excavated earth quantity |
| 45 | Supplying all materials, Labour & T & P for providing House service connections to beneficiares from PHE Dept./WATCO CI/DI pipe line to the property of beneficiaries ( both new & existing)/ Repair of House connection ,cutting of service etc. including earth work excavation ,cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damages road with CC (1:2:4) after completion of the work, lifting of excess excavated materials / debrises from work site & disposed within 5 KM radious by mechanical transport, fixing 1/8\\" dia brass/ GM ferrule with following dia composite Strap Saddle in the CI/DI pipe line, cutting holes in brick/ stone / RCC masonary work , repair the broken holes, cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender