Coal and Mines Boards / Undertakings / PSU Closing in 9 days TDR #58552268

Tender For Comprehensive Maintenance Works Of Colony (Area Office Colony, Sheetalpur Officer Colony, Kalyanpur Housing And Barachak Housing) And Area Office Under Sodepur Area, Ecl For A Period Of Two Years.

Issued by Boards / Undertakings / PSU · Paschim Bardhaman, West Bengal
Tender Value
1.79 Crore
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
2.24 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Comprehensive Maintenance Works Of Colony (Area Office Colony, Sheetalpur Officer Colony, Kalyanpur Housing And Barachak Housing) And Area Office Under Sodepur Area, Ecl For A Period Of Two Years.

BOQ

Name of Work:- Comprehensive maintenance works of colony (Area office Colony, Sheetalpur officer colony, Kalyanpur Housing and Barachak Housing) and Area office under Sodepur area, ECL for a period of two years.
Sl. No. Item Description
1PART A : Civil
2Deployment of Facility Manager for heading the entire team and single point of contact & overall incharge of FM with proper dress, shoes, ID cardon site operators, all register maintaining and reporting to Engineer-in-charge or his representative. (Note: Minimum one Facility Manager is to be deployed on monthly basis only)
3Deployment of Mason in General Shift for day to day maintenence work and as and when required with proper dress, ID Card and safety items as per instruction of EIC.
4Deployment of Carpenter in General Shift for day to day maintenence work and as and when required with proper dress, ID Card and safety items as per instruction of EIC.
5Deployment of Plumber in different shifts for day to day maintenence work and as and when required with proper dress, ID Card and safety items as per instruction of EIC.
6Deployment of unskilled manpower in different shifts for misc. jobs for day to day maintenence work and as and when required with proper dress, shoes, hand gloves, ID card as per instruction of EIC.
7Deployment of Sweeper for misc. jobs in General Shift for day to day maintenence work and as and when required proper dress, shoes, hand gloves, ID card as per instruction of EIC.
8Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 5 km outside the periphery of the area cleared.
9Regular cutting of bushes, grass,vegetations of open area arround the block and berm with grass cutting machine (Operation based on Petrol) to required shape and stacking of grasses to a lead of 50.00 m and lift of 1.5m and removal of rubbish upto a distance of 5 km outside the periphery of the area cleared.
10Cleaning of drain including removal of muck / sludge and other refuses and disposal of same through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 2.00 KM with all tools & tackles as per direction of EIC. Upto 300 mm width.
11Cleaning of drain including removal of muck / sludge and other refuses and disposal of same through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 2.00 KM with all tools & tackles as per direction of EIC. Above 300 mm width & upto 600 mm width.
12Cleaning of drain including removal of muck / sludge and other refuses and disposal of same through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 2.00 KM with all tools & tackles as per direction of EIC. Above 600 mm width.
13Cleaning of all types of roofs including removal of dry leaves, weedings & cleaning of drain holes, brooming etc. all complete with all tools & tackles & staking the garbage at specified place as per direction of In-charge.
14Brooming & cleaning of all roads in colony & within the premises of service buildings & other places as required with all tools & tackles & stacking the garbage at a specified place as per instruction of EIC.
15Cleaning of toilets in Hostels, service Buildings, Community centre, Club and other buildings etc. including cleaning of floors, dado, skirting, WC pan (Indian type / European type), wash basin, shelves, mirror & other fittings, if any by hand dusting & cleaning with including soap solution, acids, deodrants, phynile, neptholine ball, Freshner Air pocket, etc. to make the toilet clean & hygenic & providing napthaline balls in urinals, wash basins etc. with all tools, tackles & consumables as per instruction of EIC.
16Cleaning, mopping & washing of floor including clearing of cobwebs of public buildings, other places neatly with detergents / bleaching powder etc. all complete with tools, tackles & consumables to make the floor clean & hygenic as per instruction of EIC.
17Collection and disposal of garbage and other refuses from different locations in the colony area etc. including loading, unloading and disposing the same to any distance as per instruction of EIC.
18Cleaning and desilting of septic tank including removal and refixing of cover slab, removal and disposal of the sludge with all lead as per instruction of EIC including hire charge & running cost of machinaries, labour etc all complete.
19Fooging with smoker mixed with diesel @ 8 ml smoker with one litre of diesel twice per month as per direction of Engineer-in-charge (treatment to be done using spray machine along with proper safety provisions for sprayer like mask etc).
20General pest control with Malathion 50% EC and Nuvan 75% EC (2 ml Malathion & 6 ml Nuvan to be mixed with 1 litre water) for inddor as well as outdoor treatment once in a month as per direction of Engineer-in-charge. (Treatment to be done using spray machine along with proper safety provisions like mask etc.)
21Disposal of dead animal icluding transportation to specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime & bleaching powder etc. & refilling the pit with earth all complete with tools, tackles & consumables as per instruction of EIC. Big animals like Cow, Buffalo, Ox & like.
22Disposal of dead animal icluding transportation to specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime & bleaching powder etc. & refilling the pit with earth all complete with tools, tackles & consumables as per instruction of EIC. Small animals like Dog, cat, fox, pig, birds & like.
23Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth
24Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
25Supplying and filling in plinth with Local sand under floors, including watering, ramming, consolidating and dressing complete.
26Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
27Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
28Centering & shuttering including strutting, propping, etc. & removal of form work for :- Suspended floors, roofs, landings, balconies & access platforms
29Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size).
30Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars
31Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars
32Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1cement : 6coarse sand)
33Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1cement : 6 coarse sand)
34Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1cement : 4coarse sand)
35Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement : 4coarse sand)
36Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm
37Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Kajaria Ceramics, Somany Ceramics, NITCO, Johnson Tiles)
38Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood
39Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (CenturyPly, Greenply, Duro Ply, Merino, Action Tesa )
40Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (CenturyPly, Greenply, Duro Ply, Merino, Action Tesa )
41Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (CenturyPly, Greenply, Duro Ply, Merino, Action Tesa )
42Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding etc.
43Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
44Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters (Sintex, Century, Rajshri)
45Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
46Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
47Welding by gas or electric plant including transportation of plant at site etc. complete.
48Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides with all complete with steel frame.
49Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.
50Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (Kajaria Ceramics, Somany Ceramics, NITCO, Johnson Tiles)
51Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (Kajaria Ceramics, Somany Ceramics, NITCO, Johnson Tiles)
52Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm (Kajaria Ceramics, Somany Ceramics, NITCO, Johnson Tiles)
53Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²
54Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes: 75 mm diameter (Ashirvad, Supreme Industries, Finolex, Astral Pipes)
55Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes: 110 mm diameter (Ashirvad, Supreme Industries, Finolex, Astral Pipes)
56Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm
57Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm
58Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5°, 75 mm bend
59Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5°, 110 mm bend
60Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe
61Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe
62Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 75 mm
63Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm
64Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
6512 mm cement plaster of mix : 1:4 (1cement : 4 fine sand)
6612 mm cement plaster of mix : 1:6 (1cement : 6fine sand)
676 mm cement plaster of mix : 1:3 (1cement : 3 fine sand)
68Neat cement punning
69Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (Weathercoat Anti Dustt 6 years warranty including removing of existing surface and smooothning)
70Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
71Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
72Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
73Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats) damp stop duo (luxurious and long lasting, interior emulsion, Hi-sheen look, highly washable XP etc)
74Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
75Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
76Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (Weathercoat Anti Dustt 6 years warranty including removing of existing surface and smooothning)
77Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm toughened glass
78Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account).
79Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
80Demolishing cement concrete manually / by mechanical means including disposal of materilas within 50 M lead as per direction of EIC - 1:3:6 or richer mix
81Dismantling doors, windows & clerestory windows (steel or wood)shutter including chowkatha architrave, holdfast etc complete and stacking within 50 metres lead of area 3 sq.metres and below
82Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below.
83Dismantling old plaster or skirting raking out joints & cleaning the surface for plaster i/c disposal of rubbish to the dumping ground within 50 M lead.
84Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
85Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm (KAFF, Hindware, Nirali, Futura, Franke etc)
86Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm (Jaquar, CERA, and Parryware)
87Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. (Jaquar, CERA, and Parryware)
88Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 450x300 mm (TOTO, Kohler, Jaquar, CERA, and Parryware)
89Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 15 mm nominal outer dia Pipes
90Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 20 mm nominal outer dia Pipes
91Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 25 mm nominal outer dia Pipes
92Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 15 mm nominal outer dia Pipes
93Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 20 mm nominal outer dia Pipes
94Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 25 mm nominal outer dia Pipes
95Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 50 mm nominal outer dia Pipes
96Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore
97Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore
98Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore
99Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore
100Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Syntex 4 layer)
101Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including 3 coat of water proofing paint, elastomeric paint film, durable as a PU Roof Coat, primer, surface preparation, removing of existing film and 20 gsm geotextile fleece
102Providing and laying sikarup micro concrete mix of water: power ration as 0.14 with mixing time should be of minimum 5 min.
103Supply of Stone Aggregate (single size) : 20 mm nominal size as per instruction of EIC.
104Supply of cement in bags of approved make as per instruction of EIC.
105Supply of Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles of approved make & quality as per instruction of EIC.
106Supply of Chromium plated Brass Wardrobe Knob 50 mm of approved make & quality as per instruction of EIC.
107Supply of Chromium plated Brass curtain rod 20 mm dia 1.25 mm thick of approved make & quality as per instruction of EIC.
108Supply of coarse sand as per instruction of EIC.
109Supply of Mirror of superior make glass 60x45 cm of approved make & quality as per instruction of EIC. ( Saint-Gobain, Glazonoid, Toyo Sanitarywares, Raj Glass Works, Kohler, Nilkamal)
110Supply of GI union of approved make & quality as per instruction of EIC: 15 mm nominal bore
111Supply of GI union of approved make & quality as per instruction of EIC: 20 mm nominal bore
112Supply of GI union of approved make & quality as per instruction of EIC: 25 mm nominal bore
113Supply of Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore of approved make & quality as per instruction of EIC.
114Supply of White plastic seat (solid) with lid C.P. brass hinges and rubber buffers of approved make & quality as per instruction of EIC.
115Supply of Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia of approved make & quality as per instruction of EIC. (Jaquar, CERA, and Parryware)
116Supply of H.P. or L.P. ball valve with polythene floats: 20 mm dia of approved make & quality as per instruction of EIC.
117Supply of 20 mm dia Gunmetal gate valve with wheel of approved make & quality as per instruction of EIC.
118Supply of Brass full way valve with C.I. wheel (screwed end) of approved make & quality as per instruction of EIC: 25 mm dia
119Supply of C.I. sluice valve (with caps) class I: 100 mm dia of approved make & quality as per instruction of EIC.
120Supply of C.I. sluice valve (with caps) class I: 150 mm dia of approved make & quality as per instruction of EIC.
121Supply of C.I. sluice valve (with caps) class I: 200 mm dia of approved make & quality as per instruction of EIC.
122Supply of Ply wood 5 ply with commercial ply on both faces 6 mm thick of approved make & quality as per instruction of EIC.
123Supply of 12 mm thick commercial ply of approved make & quality as per instruction of EIC.
124Supply of Anodised Aluminium hanging type door stopper of approved make & quality as per instruction of EIC.
125Supply of Nickled Chromium Brass cupboard lock 40 mm size of approved make & quality as per instruction of EIC.
126Supply of Common burnt clay F.P.S. (non modular) bricks class designation 7.5 as per instruction of EIC.
127Supply of Aluminium tee channel (heavy duty) with rollers and stop end of approved make & quality as per instruction of EIC.
128Supply of Hydraulic door closer tubular type Aluminium section body of approved make & quality as per instruction of EIC. (Godrej, Ozone)
129Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings of approved make & quality as per instruction of EIC.
130Supply of C.P. Brass bibcock 15 mm of approved make & quality as per instruction of EIC. (Jaquar, CERA, and Parryware)
131Supply of C.P. Brass stop cock (concealed) 15 mm of approved make & quality as per instruction of EIC.
132Supply of C.P. Brass angle valve 15 mm of approved make & quality as per instruction of EIC. (Jaquar, CERA, and Parryware)
133Supply of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) of approved make & quality as per instruction of EIC. (Jaquar, CERA, and Parryware)
134Supply of PTMT - Towel Rail (600 mm long) of approved make & quality as per instruction of EIC. (Jaquar, CERA, and Parryware)
135Supply of Stainless steel screws 50 mm of approved make & quality as per instruction of EIC.
136Supply of Stainless steel screws 40 mm of approved make & quality as per instruction of EIC.
137Supply of Stainless steel screws 30 mm of approved make & quality as per instruction of EIC.
138Supply of Stainless steel screws 20 mm of approved make & quality as per instruction of EIC.
139Supply of Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :12817 marked of approved make & quality as per instruction of EIC.
140Supply of Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :12817 marked of approved make & quality as per instruction of EIC.
141Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia of approved make & quality as per instruction of EIC.
142Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia of approved make & quality as per instruction of EIC.
143Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia of approved make & quality as per instruction of EIC.
144Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia of approved make & quality as per instruction of EIC.
145Supply of 15 mm dia CP pillar cock of Parryware or its equivalent make as per instruction of EIC.
146Supply of 2 way CP bib cock 15 mm nominal size with wall flange of Parryware make or its equivalent as per instruction of EIC.
147Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Elbow 15 mm as per instruction of EIC.
148Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Elbow 20 mm as per instruction of EIC.
149Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Elbow 25 mm as per instruction of EIC.
150Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Socket 15 mm dia as per instruction of EIC.
151Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Socket 20 mm dia as per instruction of EIC.
152Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Socket 25 mm dia as per instruction of EIC.
153Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Nipple: 75 mm long 15 mm dia as per instruction of EIC.
154Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Nipple: 75 mm long 20 mm dia as per instruction of EIC.
155Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Nipple: 75 mm long 25 mm dia as per instruction of EIC.
156Supply of Polyethylene water storage tank cover and suitable locking arrangement as per instruction of EIC.
157Supply of Maruti lock (100 mm) for aluminium window shutters of approved make & quality as per instruction of EIC.
158Supply of health faucet 15 mm nominal size with 1 metre long easy flex tube Chromium plated of Hindware make or its equivalent all complete as per instruction of EIC. (Jaquar, CERA, and Parryware)
159Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Plain Tee 15 mm as per instruction of EIC.
160Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Plain Tee 20 mm as per instruction of EIC.
161Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Plain Tee 25 mm as per instruction of EIC.
162Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Union 15 mm as per instruction of EIC.
163Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Union 20 mm as per instruction of EIC.
164Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Union 25 mm as per instruction of EIC.
165Supply of PVC roller for sliding window of approved quality as per instruction of EIC.
166Supply of brass spindle and valve of stop cock/bib cock/push cock/pillar 15 mm as per instruction of EIC.
167Supply of PVC flush pipe 50 mm for low level cistern of approved brand as per instruction of EIC.
168Supply of CPVC / PVC: Solvent Cement as per instruction of EIC. 250 ml Pack
169Supply of 5 Hp submersible pump with starter and fitting fixing of approved quality like kirloksar, taxmo, KSB, crompton, Havels or equivalent make.
170Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A
171Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch.
172Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch
173Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet
174Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 amp socket outlet
175Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 4 way (4 + 12), Double door
176Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 63 amps
177Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required: Single pole
178Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.
179Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.
180Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.
181Supplying and fixing PVC batten/ angle Folder including connection etc. as required.
182Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
183Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
184Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
185Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep.
186Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required.
187Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).
188Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.
189Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge: (2600sqm x 24 months)
190Supply of Rogar from authorized dealer as per instruction of EIC.
191Supply of DAP from authorized dealer as per instruction of EIC.
192Supply of Bone meal from authorized dealer as per instruction of EIC.
193Supply of Mustard cake from authorized dealer as per instruction of EIC.
194Supply of Bio Fertilizer from authorized dealer as per instruction of EIC.
195Supply of Chlorophyriphos from authorized dealer as per instruction of EIC.
196Supply of Monosil from authorized dealer as per instruction of EIC.
197Supply of Bavistyn from authorized dealer as per instruction of EIC.
198Supply of seasonal flower plants as per instruction of EIC.
199Supply and fixing of Name plate/ Board for plantatation at the time of VIP Visit as per instruction of EIC. (Size- variable from 1\\"x1\\" to 4\\"x3\\")
200Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58552268
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.79 Crore
LAST DATE 01-12-2026
Authority
Authority Name Eastern Coal Fields Ltd
Work Description Tender for Comprehensive Maintenance Works Of Colony (Area Office Colony, Sheetalpur Officer Colony, Kalyanpur Housing And Barachak Housing) And Area Office Under Sodepur Area, Ecl For A Period Of Two Years.
Basic Detail
Tender No SDPA/Civil/G-11/26-27/74 Dt-16.11.2026
Bidding Type Tender
Location
City Paschim Bardhaman
State West Bengal
Key Dates
Publish Date 16 Nov 2026
Submission Date 01 Dec 2026
Open Date 02 Dec 2026
Finance
Tender Value 1.79 Crore
Tender Fee Ref. Documents
EMD 2.24 Lakhs
Exemption Not Available
Document List
2ade46fc-d515-46bb-9876-6367d8669932.html
BOQ_382018.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

2ade46fc-d515-46bb-9876-6367d8669932.html

xls

BOQ_382018.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender