Tender For Restoration Of Rain Damages Water Supply Scheme Chaloh In Gp Sai In Tehsil Sadar Distt. Mandi (Hp). (Sh:-C/O 20,000 Liters Capacity Reinforced Cement Concrete Storage Tank At Chaloh ). Pdna -5058.
Tender Value
2.79 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
8 days left
EMD
5600
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Water Supply Scheme Chaloh In Gp Sai In Tehsil Sadar Distt. Mandi (Hp). (Sh:-C/O 20,000 Liters Capacity Reinforced Cement Concrete Storage Tank At Chaloh ). Pdna -5058.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth work in all kinds of soil such as pick work. jumper work, blasting work, chiselling work soft / hard rocks where blasting is prohibited in all leads and lifts. |
| 2 | Excavation in foundations trenches etc. (for pipes and pits) upto all depths in all kinds of soil such as pick work, jumper work, blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of CI.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting / timbering and dewatering where ever required including restoration of un-metalled / metalled paved surface of itsoriginal conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) in all leads and lifts |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying cement concrete 1:2:4 ( 1 cement:2 sand: 4graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work and reinforcement in:-Suspended floors roofs landing and sheleved and their supports balconioes, beams girderss, bressumers and cantilivers upto floor two level. |
| 7 | Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including certring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete & plain concrete work in all leads and lifts in:-Vertical surface such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like. |
| 8 | Flat surfaces such as soffits of suspended floors,roofs, landings and the like in(a) floor etc. upto 200mm thickness. |
| 9 | Steel reinforcement for R.C.C. work includ straightening, cutting, bending, placing in posi and binding all complete upto plinth level. steel and Medium Tensile steel bars in all leads and lifts. |
| 10 | Providing and fixing of 3.15 mm MS Sheet Manhole cover 600x600 mm fixedon all sides with ISA 35x35x5 mm bottom angle iron frame as per drawing. Pices of MS Flat 20x4 mm,0.15m long be fixed on all sides as hole fast. The operation of manufacturing shall including cutting of MS Sheet, Angle section & welding of MS Sheets, Angle section, Hings, Handles 150 mm long, 20x4mm flats, locking arrangements and apply of primary coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge.) |
| 11 | Laying and jointing in trenches galvanised mild steel tube (light grade) including tube fittings (Earth work to be measured and paid for separately) Inlet Pipe, Outlet and overflow Pipe :- Inlet pipe 32 mm dia |
| 12 | Inlet Pipe 25 mm dia |
| 13 | Scour Pipe 50 mm dia |
| 14 | Vent Pipe 100 mm dia |
| 15 | Providing & fixing GM gate Valve (Heavy 1st Class) screwed female ends, screwed in bonnetinside screw, nonrising stem ,integral seats & hand wheel oprated of following nominal diameter complete within all leads and lifts as per the direction to the entire satisfaction of the Enginee-in-charge. Inlet 32 mm dia |
| 16 | Outlet 25 mm dia |
| 17 | Scour Pipe 50 mm dia |
| 18 | Providing, Manufacturing, Supplying & Fixing of M.S.Wheel Valve Chamber of size 450 x 450 x 450 mm made of 2.00 mm thick M.S. Sheet with MS. Angle 35 x 35 x 4 mm thick and also providing extra length of 250 mm of same angle (as tee) in the bottom of all four lags for embedding in cement concrete and top opening will provide with hinges with locking arrangement providing hole on three side of chamber for crossing of different size of pipes complete etc. and redring smooth in cement concrete 1:4:8 complete in all respect. The height of wheel valve chamber not less than 600 mm including cutting, welding, painting with red oxide paint complete in all respect and as satisfaction of the Engineer in Charge. Please Enable Macros to View BoQ information Terms and conditions |
| 19 | The work should be executed as per PWD/JSV specifications and to the entire satisfactions of the Engineer-in Charge. |
| 20 | The cement, steel and GI pipes shall be issued by the department from JSV Divisional Store Raghunath Ka Padhar Mandi cement @ 368/- per bag, Steel Rs.7615/-only per qtl. and G.I pipe free of cost respectively. |
| 21 | The Contractor will be fully responsible for watch and ward of material at site of work. |
| 22 | Nothing shall be paid for rejected/sub-standard material at site of works. |
| 23 | Concrete work shall be done by using vibrator and concrete mixing plant. |
| 24 | Crushed aggregate will be used in concrete work. |
| 25 | Material should be used of approved quarry. |
| 26 | The work should be completed in the stipulated period. |
| 27 | The rates should be inclusive with GST and carriage |
| 28 | 1% labour cess will be deducted from the bill of the contractor. |
| 29 | GST as applicable will be borne by the contractor. |
| 30 | No deviation will be allowed without the prior permission of the Engineer-in-charge. JS Division Mandi |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender