Water Resources and Irrigation Government Departments Closing in 8 days TDR #58551772

Tender For Restoration Of Rain Damages To Lwss Navlay Gharan In Gp Navlay & Gharan Tehsil Sadar Distt. Mandi (Hp).(Sh:- Providing And Fixing Electrical Equipments/Accessories & Mechanical Spare Parts In Pump House At Ist Stage And Monoblock Pump Set

Issued by Government Departments · Mandi, Himachal Pradesh
Tender Value
4.33 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
8 days left
EMD
8700
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Restoration Of Rain Damages To Lwss Navlay Gharan In Gp Navlay & Gharan Tehsil Sadar Distt. Mandi (Hp).(Sh:- Providing And Fixing Electrical Equipments/Accessories & Mechanical Spare Parts In Pump House At Ist Stage And Monoblock Pump Set At Raw Water Stage).

BOQ

Name of Work:- Restoration of Rain Damages to LWSS Navlay Gharan in GP Navlay & Gharan Tehsil Sadar Distt. Mandi (HP).(SH:- Providing and Fixing Electrical Equipments/Accessories & Mechanical Spare Parts in Pump House at Ist Stage and Monoblock Pump Set at Raw Water Stage).
Sl. No. Item Description
1Providing & Fixing Manually Operated L.T. Oil Circuit Breaker (non Draw Out Type: SOCB-N of Bentex / Capital / MEI make 200 ampere of breaking capacity 15 KV in MVA on incomming feeder with or without initial oil filling as the case may be with neutral linked under voltage releasees as per IS-2516-1985 with uoto date ammendments including interlocking charges in all leads and lifts.
2Providing and Fixing Oil immersed Star Delta Motor Starter Heavy Duty with double Contact Strip Wound Overload Coil & Cable Entry Box type SSD-S-Dx manually operated 101-125 HP ΜΕΙ /CAPITAL / BENTEX make complete in all respect and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts.
3Providing and Fixing direct-on-Line oil immerssed submersible control Panel with amp & \\"olt meter+MCB+overload projection (Magnetic Dash Pot Relay) sets of Three Phase Submersible Pump Controllers (with wideband coil) MU-G 7.5 to 20 HP DOL 415 volts, 50 Hz of Bentax / Capital /MEI make in all leads and lifts.
4Providing and Fixing Cast Carbon Steel Sluice Valve of BIR / KARTAR / PELICON make (B.S. 14846) Class CL 600 with flange Table 28 with Nut & Bolts and Gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect. The diameter of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.65 mm diameter
5Supply and Erection of Submersible raw water pumping set of reputed make such as KSB/CALAMA/SU/JOHNSTON KIRLOSKAR conforming to latest relevant BIS code. The pump should be fitted with free flow impellers of suitable alloy as per BIS 5659-1970 latest suitable for raw water 3000 PPM having greased packer bearing and shaft with bound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of same make as of pump conforming to relevant BIS code latest with upto date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechnical seal in oil chamber & grease packed lubricated bearing & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with heating of motor. The pump set should include water level guard errection clamps, cable clips & depth gauge etc. & suitable for operation on data given below:-Total Head: - 28.00 MetersDischarge: - 19.00 LPS or 1140 LPMRPM:- 2920
6Providing and Fixing suction hose pipe 100 mm dia with nipple and clamps as delivery pipe complete job in all respect. Please Enable Macros to View BoQ information Terms and conditions
7The work should be executed as per PWD/JSV specifications and to the entire satisfactions of the Engineer-in Charge.
8The Contractor will be fully responsible for watch and ward of material at site of work.
9Nothing shall be paid for rejected/sub-standard material at site of works.
10Material should be used of approved quarry.
11The work should be completed in the stipulated period.
12The rates should inclusive with GST and carriage
131% labour cess will be deducted from the bill of the contractor.
14GST as applicable will be borne by the contractor. (Other Terms Conditions Attached Separately).
15The firm shall forward a copy of supply order/indent placed by it for the supply of pumps and motors on the manufactures/authorized dealers of the pump and motors to the consignee within 30 days after issue of the letter of intent/award by the Engineer-in-Charge.
16The firm shall arrange dispatch of offered pumps and motors to the consignee direct from the manufacturers /their authorized dealers of the pumping machinery for which the supply order/indent has been placed by the firm. The packing slip should indicate the details of materials in the package and material of construction of pumps and motors.
17The shop test for the pumps and motors shall be carried out at manufacturers works in the presence of representative of the department as per IS-325-1978.The test performance certificate of the pumping machinery shall be arranged by the firm from the manufacturers and get it approved from the Engineer-in-charge before actual dispatch of the pumping machinery
18The firm shall supply the recommended list of spares and quantities required for normal working of pumping machinery(2 years) from the manufacturers of the aforesaid equipment at the time of quoting rates and shall quote items rates for the same also.
19The firm shall supply the manufacturers manual for the operation and maintenance of the pumping equipments.
20The firm shall arrange operation and maintenance training to the operating staff for the pumping machinery (with out extra cost) for a period of 7 days i.e. during the testing period.
21The characteristic curves of the pumping equipment shall be supplied with the offer, other wise the tender shall be rejected.
22The firm shall supply layout drawing in respect of various components ,such as suction pipes, valves, cable trenches, control panel etc. from the foot valve location to the common header, which shall extend upto 5 metre from the outer walls of the pump house towards rising main. The details of foundations required for various components shall also be supplied by the firm within 30 days of the letter of indent/award.
23The installation of pumping machinery above 100 HP shall be inspected by the technical representative of the manufacturers, of rank not less than that of a services Engineer, at the work site and inspection certificate shall be supplied to the Engineer-in-charge .This inspection shall be in addition to the test report and nothing extra shall be paid on this account.
24The wiring and installation of electric equipment shall be as per HPSEB rules and regulations and subjected to the approval of the Chief Electrical Inspector and or his authorized officer. Any defect pointed out shall be rectified by the firm without any extra cost. The wiring and installation of all electrical equipment shall be done by a licensed contractor of approved class of HPSEB authorities on their approved format (form D)for release of power connection by the firm without extra cost.
25The temporary electric connection, if required during installation shall be arranged by the firm at its own cost and energy charges shall also be paid directly by the firm to the HPSEB.
26Prices of all items shall be F.O.R. site of work inclusive of all leads and lifts and shall be inclusive of all charges of transportation, insurance, packing, taxes and duties such as sale tax, excise duty, local taxes etc.
27The rates shall be quoted only on the format of schedule of quantities, which is attached with the tender document giving all specified data so desired therein.
28The rates offered for the specified makes in the schedule of quantities only shall be considered .Rates quoted for part or non specified makes shall lead to rejection of the tender.
29The location of site can be ascertained from the concerned Assistant Engineer, and the rates quoted by the firm shall be inclusive of all mechanical and manual transport within all leads and lifts to the site of work.
30The contractor is requested to inspect the site before quoting his rate.
31All the equipment/ material shall conform to the relevant BIS specifications, wherever applicable and in its absence to any accepted National/International standards.
32The general specifications of work shall conform to Punjab PWD/HPPWD specifications as per direction of the Engineer-in-charge.
33The validity of the tender shall not be less than 120 days otherwise the tender shall be summarily rejected.
34All the equipments shall be guaranteed against any manufacturing defect including metallurgy and its performance for a period of 12 (twelve)months from the date of commissioning. Any defect, if noticed within the stipulated period shall be rectified by the firm at its own cost within 15 days of bringing the same to its notice. The guarantee clause shall be substantiated by a guarantee bond of a Nationalized Bank for an amount equal to the cost of pumping and electrical equipment (accessories included)pledged in the name of the Executive Engineer-in-Charge at the time of applying for refund of security deposits. The guarantee bond shall be released after the expiry of the guarantee period.
35The installed pumping machinery and other allied accessories shall be tested daily for stipulated pumping hours in the NIT (20 Hours) for a period of seven days without extra cost. However the cost of electricity and water shall be borne by the department.
36During the guarantee period efficiency of the pumping and the electric equipment should not vary beyond the range(+/-)2.5%. If during guarantee period, the efficiency falls beyond 2.5% to a maximum of 5%,1% cost of the pump set for 1% fall of the efficiency shall be deducted. In case of fall of efficiency beyond 5% the pump set shall be rejected and cost of the effected pump set recovered from the pledged Bank guarantee and or from the security deposit as the case may be.
3790% (Ninety percent) payment of the cost of pumping machinery and equipment less 10% security and other statutory recovery shall be made after receipt of complete pumping machinery i.e. pump and motors along with accessories received together at site of work in good condition. The balance 10% cost after deduction of the security and other recoveries shall be released after successful and satisfactory installation ,testing of entire equipment. Ten percent security deposits shall be released as stipulated in the agreement.
3890% (Ninety percent) installation charges shall be released after satisfactory installation of all the pumping and electrical equipment. Remaining 10% of installation charges shall be released after testing of the entire equipment .

AI Tender Summary

OUR REF NO 58551772
AUTHORITY Government Departments
TENDER VALUE 4.33 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Irrigation And Public Health Department
Work Description Tender for Restoration Of Rain Damages To Lwss Navlay Gharan In Gp Navlay & Gharan Tehsil Sadar Distt. Mandi (Hp).(Sh:- Providing And Fixing Electrical Equipments/Accessories & Mechanical Spare Parts In Pump House At Ist Stage And Monoblock Pump Set At Raw Water Stage).
Basic Detail
Tender No 15255-354
Bidding Type Tender
Location
City Mandi
State Himachal Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 4.33 Lakhs
Tender Fee 350
EMD 8700
Exemption Not Available
Document List
8478d497-5348-41e7-bd61-e0212413a18f.html
BOQ_221234.xls
Form6.pdf
Form8.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

8478d497-5348-41e7-bd61-e0212413a18f.html

xls

BOQ_221234.xls

pdf

Form6.pdf

pdf

Form8.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender