Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58551272

Tender For Provn Of Certain Sanctioned Work Including Minor Works At Af Stn Avadi

Issued by Statutory Bodies & Commissions/Committees · Thiruvallur, Tamil Nadu
Tender Value
39.50 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
79000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Provn Of Certain Sanctioned Work Including Minor Works At Af Stn Avadi

BOQ

Name of Work:- PROVN OF CERTAIN SANCTIONED WORK INCLUDING MINOR WORKS AT AF STN AVADI
Sl. No. Item Description
1PART -I - PROVN OF TIN SHED AND ADDITIONAL WASHING POINT FOR AUTO TECH SQN HANGER (T-64) AT MTTI AF STN AVADI
2Surface excavation n.exc 30 cm deep and averaging 15 cm and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
3Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete in soft/loose soil.
4M & L for PCC(1:4:8) type D-2 (40 mm graded aggregate) as in foundation, filling & Mass concrete as directed by Engr-in Charge
5Spreading and leveling in layers not exc 25 cm thick and welll ramming including watering as required completed all as specified and directed by Engr In charge.
6M/L for Hard core of guage not exc 63mm with broken stone deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface complete all as specified and directed.
7M&L for PCC 1:4:8 type D-2,(using 40 mm graded aggregate) 100 mm thick as in sub base to receive floor finishes etc complete all as specified.
8M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded granite stone aggregate) inpavings all as specified.
9M&L for machine cut, Pre polished Kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick screed bed or bedding layer in CM 1:6 finished even and rough all as specified and directed.
10M&L for Old size Brick work with flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.
11M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 (finished even and fair) , complete complete all as specified and directed.
12M&L 20 mm thick rendering ( in two coats 10mm+10mm) on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 2% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
13M&L for two coats of oil bound distemper over a coat of priming coat on newly prepared wall surfaces,including 1 mm thick layer of wall care putty (Birla white or equivalent) all as specified and directed..
14M&L of new plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
15M & L Reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in slab supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slab and in shelves and the like all as specified and directed.
16Use and waste Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide
17M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
18M & L Mild steel bars 8 mm dia and over as in stirrups cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
19S & F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
20S & F anodised aluminium window and ventilator shutters,side hung type without sash,aluminium section weighing 0.55 kg/m including necssary joining cleats,glazing clips,ruber packing,anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified
21S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
22M&L 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.
23S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
24S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and directed.
25S&F Aluminium body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete as per the direction of Engineer-in-charge.
26S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete as per the direction of Engineer-in-charge.
27Supplying and laying 16 mm dia of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
28Supplying and laying 20 mm dia of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
29S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) (1000 ltr) hoisted and fixed in position all as specified and directed.
30S&F 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.
31S&F 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
32M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.
33Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete.
34Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point. Complete all as specified and directed by Engr-in-Charge.
35Excavation in post holes each n.exc 0.5 Cum getting out in soft/loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm and removing surplus soil to ad distance n.exc 50m and making good surface.
36M&L for PCC 1:5:10 type E2 (using 40mm graded aggregate) as in foundations, filling and mass concreteing.
37S&F MS Plate of Fe 410 -W ( Gde -E-250) (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes including reveted, boled or welded attachment etc. complete all as specified and directed
38S&F mild steel work in tubular trusses, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof, projection etc. complete all as specified and directed.
39S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and directed by Engr-in-Charge.
40S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
41M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer, exc 10cm width or girth complete all as specifeied and directed.
42Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
43M&L for forming construction joint 100mm deep x 10mm deep wide filled with grade \\"A\\" sesling compound with polyurethane foam complete.
44M&L for coloured & polished Chequered cement concrete tiles 30cmX30cmX25mm thick,set, jointed and pointed in neat cement slurry complete all as specified and directed by Engr - in - Charge.
45Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly,including Modular boxes, frames and cover plates all as specified for the following:(a) One light point controlled by one switch.
46(b) One Ceiling fan point controlled by one switch and regulator
47(c) One Exhaust fan/wall mounted fan point controlled by one switch.
48(d) One 3 pin 5 amps socket point on same board
49(e) One 3 pin 5 amps socket point on independent board
50M & L for point wiring with two runs of 4 Sqmm (nominal area) PVC insulated,FRLSH sheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20/25mm dia and its accessories concealed/ fixing on wall/ceiling/trusses with suitable clamps , screws etc including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for One 5 pin 5/15 amps socket point on independent board complete all as specified.
51Supply and Fixing Modular switch 1 way 6A, 1 module complete all as specified.
52Supply and Fixing Modular switch 1 way16A, 1 module complete all as specified.
53Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified.
54Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified.
55Supply and Fixing Modular fan step regulator , 120w, 2 module complete all as specified.
56S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.
57Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 10 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.(MCB for SPN DB)
58Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole Neutral and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.(MCB for VTPN DB)
59Supply and fixing 415V, 10 KA 'C' curve miniature circuit breaker (MCB) of TP and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.
60S&F MCB DB SPN 4 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.
61Supply and fixing of LED tube light fitting with polycarbonate LED tube light 20W 4 feet and 1x20 watt box type batten aluminum body with microwave motion technology and integrated electronic driver including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.
62S&F LED building security light fitting 45W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed.
63Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor with five star rating.
64Supply and fixing Single phase propeller type Exhaust fan heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrers and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
65M&L for wiring for circuit / power /sub main wire with two runs of single core 4 Sqmm size and one run of 4 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.
66M&L for wiring for circuit / power /sub main wire with two runs of single core 6 Sqmm size and one run of 6 Sqmm (green colour as earth continuity conductor) PVC insulated, sheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.
67S&F Load line vertical distribution Board, TPN 4way double door, fixed on wall semi flush, loadline DB are fitted with Bus bars, neutral links, blanking plates, including incommer MCCB 100/125 Amps,TP and suitable outgoing MCB 40 /63Amps,SP/DP/TPN with all accessories suitable for DB including taking down old unserviceable DB all as specified and as directed. Note : Incoming MCCB and Out going MCBs measured seperately relevent items.
68Supply ,laying and testing cable XLPE insulated, Screened PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duty) 1100 Volt grade with stranded aluminum conductor of size 35Sqmm 3.5core complete all as specified and directed.
69Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.
70Material and labour for GI earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed by Engr-in-Charge
71Supply and laying UPVC pipes 50 mm dia of Sch 80 laid in trench complete including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including taking down the old rusted pipe and testing complete all as specified and as directed.
72All as per item above but 25 mm dia
73All as per item above but 20 mm dia
74Supply and fix for 50 mm bore dia UPVC gate valve (brass insert) complete all as specified and as directed.
75Supply and fix for 25 mm bore dia UPVC gate valve (brass insert) complete all as specified and as directed.
76Supply and fix for 20 mm bore dia UPVC gate valve (brass insert) complete all as specified and as directed.
77PART -II - ADDN/ALTN OF PORTA CABIN INTO STUDY ROOM AND RECREATIONAL ROOM FOR TRAINEES NEAR 2(T) BILLETS OF MTTI AT AF STN AVADI
78Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
79Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
80Providing and fixing Ridges plain (500 - 600mm) precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete.
81Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
82Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38mm of length 3000 mm, cross - T of size 24x32 mm of length1200 mm and econdaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items (galvanizing@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm fastener if require,fixed with Glavanised iron perimeter wall angle or size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws With 15 mm thick tegular / butt edged without perforation plain / designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in Charge.
83Dismantling tile work in floors,wall For thickness of tiles 10 mm to 25 mm and roofs laid in cement mortar including stacking material within 50 metres lead.
84Providing and laying vitrified floor tiles in different sizes ( size of tiles 600 x 600 mm) ( thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours & shade ,laid over 20 mm thick of cement mortar 1:4( 1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments etc complete.
85Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats(of area 3 sq. metres and below), architrave, holdfasts etc. complete and stacking within 50 metres lead
86Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
87Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
88Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
89Providing and fixing Pre-laminated particle board with decorative lamination on both side12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
90Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm With 12 mm mild steel U beading complete all as specified and directed.
91Providing and fixing float glass panes of 4 mm thickness (weight not less than 10.00 kg/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
92Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (A) With stainless steel cover plate minimum 1.25 mm thickness
93Providing and fixing 125X63X4mm aluminium butt hinges, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed.
94Providing and fixing 200x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.
95Providing and fixing bright /matt finished Stainless Steel 125 mm handles of approved quality & make with necessary screws etc complete all as specified and directed.
96Providing and fixing 300x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed.
97Providing and fixing chromium plated brass curtain rod 20 mm dia having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.
98Removing old surface, cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches with extiror wall care putty etc. complete on wall or ceiling Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm.
99Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete on wall or ceiling and applying with one coat of 1mm thick interior wall care putty and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour two or more coats over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
100Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
101Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.
102Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.
103All as per item above but for one 3 pin 5 Amp socket out let controlled by one switch same board.
104All as per item above but for one 3 pin 5 Amp socket out let controlled by one switch indep board.
105Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.
106Supplying and fixing 5/6 A modular switch including connections but excluding modular plate etc. as required.
107Supplying and fixing 15/16 A modular switch including connections but excluding modular plate etc. as required.
108Supplying and fixing 3 pin 5/6 A modular socket including connections but excluding modular plate etc. as required.
109Supplying and fixing 6 pin 15/16 A modular socket including connections but excluding modular plate etc. as required.
110Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
111Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
112LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED 45 watt fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching)<5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Themeteral management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
113LED Panel light 2x2 ft. 36 Watt capacity (System lumen efficacy ≥120 <135 lm/Watt) Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Note:- Surface mounting type Panel to be fixed.
114Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is nometerally used where 3 phase outlets are required.)
115Providing and fixing rating 100 A, 30 KA,FPMCCB and breaking capacity and pole MCCB with themeteromagnetic release and temeterinal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
116Supplying and fixing 5 A to 32 A rating, Single Pole 240 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
117Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 °C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required for 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)
118Supply and fix air circulator fan AC single pahse 230/240V of size 600 mm sweep with fixing arrangement complete all as specified and as directed. Note:- Old unsv Fan will be deposit back to MES store yard.
119Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
120Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.
121Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 50 Sqmm 3.5 Coresize direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
122Supply only cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core
123Providing and fixing rating 200 A, 16 KA,FPMCCB and breaking capacity and pole MCCB with themeteromagnetic release and temeterinal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.
124Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.
125Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners 1.5T capacity 5 Star rating inverter type complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature).
126Supply and fixing of GI powder coated brackets 16SWG for fixing of split Acs out door unit and including grouting with suitable size fastners complete.
127Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input varition between 170V to 250V with out put voltage stablized at 230v with accuracy of +/- 2.5% and capacity 5KVA Make :- Servokon SK 410 C, V-guard or equivalent
128Supply and fix copper tubing set 1/4\\" and 1/2\\" suitable for Split AC including PUF insulation and connected accessories, fixcing for outdoor unit for user requirement complete all as directed by eng-in-charge
129Wiring for circuit/ submain wiring along with earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
130Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
131PART -III - PROVN OF FENCING AROUND SWTs IN SPORTS SECTION, DC-IV AND OFFICERS MESS AT AF STN AVADI
132M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in wall built in cement mortar 1:4 complete all as specified.
133S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.
134S&F of joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 410-W (gde 250 quilty A) complete all as specified and directed.
135S&F 25 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples all as specified and directed.
136M&L for preparation of New painted surface of steel and iron of any description over 10 cm in width or girth , applying two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer complete all as specified.
137M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 (finished even and fair) , complete complete all as specified and directed.
138M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paing complete all as specified and directed.
139Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
140M&L for PCC 1:4:8 type D-2,(using 40 mm graded aggregate) 100 mm thick as in sub base to receive floor finishes etc complete all as specified.
141M&L for coloured & polished Chequered cement concrete tiles 30cmX30cmX25mm thick,set, jointed and pointed in neat cement slurry complete all as specified and directed by Engr - in - Charge.
142PART -IV - PROVN OF IRON GRILL DOORS AND ALUMINIUM WINDOW IN UEB SECTION OF AFP AND STI AT AF STN AVADI
143Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq.m but n exc 4 sq.m each all as specified and directed.
144Taking down chowkhats or frames with shutters and (without taking off shutters from frames) n.exc 1.5 sq.m each all as specified and directed.
145S & F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
146S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
147S & F anodised aluminium window and ventilator shutters,side hung type without sash,aluminium section weighing 0.55 kg/m including necssary joining cleats,glazing clips,ruber packing,anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified
148S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
149S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and directed.
150S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
151S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specifed and directed.
152M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specifed and directed.
153Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.
154M&L for vitrified ceramic tiles (light shade)10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.
155M&L for vitrified ceramic tiles (light shade)10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and including 10 mm thick rendering in cement mortar (1:4) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.
156Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified.
157S&F false ceiling of Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium frame work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE
158M &L for 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in levelling course all as specified and directed.
159S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165
160M&l for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
161PART -V - PROVN OF WATER OUTLET HOLES AND WIDENING OF DITCHED OF ARTICULATED DRIVING TRACK MTTI AF STN AVADI
162Demolition of Cement concrete of any description and in any position not otherwise specifically provided all as specified and directed.
163Dismantling wrought iron or mild steel work of any description complete all as specified.
164PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base or foundation ,mass concrete etc.complete all as specified & directed by Engineer- in-charge.
165Providing PCC 1:2:4, type B0 (using 12.50mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platescoping including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
166M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated Fe 410 -W (Gde- E- 250) quality A complete all as specified.
167Excav. In trenches n. exc 1.5,m wide and n. exc 1.5m deep and getting out in hard/dense soil
168M&L for Old size Brick work with flyash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.
169M & L for Rendering 15mm thick in cm 1:4 on concetre surfaces with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.
170Supply only integral water proofing compound complete all as specified and directed.
171Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc.,
172Returning, filling in incl spreading, levelling, watering and well ramming in layers n.exc.25cm thick.
173Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
174PART -VI - PROVN OF FLAME PROOF LIGHTS AT CERTAIN PLACES (QTY-10) AT 23 ED
175Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including Steel conduit fittings and conduit accessories not less than 20 mm dia and fixed on walls/Ceiling with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly,including all as specified for the following:(a) One light point controlled by one switch.
176M&L for wiring for circuit / power /sub main wire with two runs of single core 6 Sqmm size and one run of 6 Sqmm (green colour as earth continuity conductor) PVC insulated, sheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia Steel conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.
177Supplying and fixing switch flame proof rotary type with termination box in LM6, 10/16, single pole 240V Complete all as Specified.
178S&F in replacement of LED light fitting 1x20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified.
179Supply and Fix Flame Proof/ Weather Proof MCB Distribution Board of following specifications: SPN 4 Way Enclosure Size: 250X250mm) FLP/WP Lighting Distribution Panel Incoming: - MCB, 2P, 16A/25A -1 No Outgoing: - MCB, 1P, 6Amp/10A — 2 Nos (MCB- L&T/ Schneider/ABB Make) With complete internal Bus bar & wiring up to terminals. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58551272
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 39.50 Lakhs
LAST DATE 05-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Provn Of Certain Sanctioned Work Including Minor Works At Af Stn Avadi
Basic Detail
Tender No 8474/E8
Bidding Type Tender
Location
City Thiruvallur
State Tamil Nadu
Key Dates
Publish Date 16 Nov 2026
Submission Date 05 Dec 2026
Open Date 07 Dec 2026
Finance
Tender Value 39.50 Lakhs
Tender Fee 500
EMD 79000
Exemption Available
Document List
19adfc89-644f-4c62-8288-59036a090332.html
8474TenderDocuments.pdf
BOQ_896308.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

19adfc89-644f-4c62-8288-59036a090332.html

pdf

8474TenderDocuments.pdf

xls

BOQ_896308.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender