Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58550918

Tender For special Repair To Fencing Steel Gates And Misc Certain B/R Repair Work Of Nehru Enclave Under Ge (East) Lucknow

Issued by Statutory Bodies & Commissions/Committees · Lucknow, Uttar Pradesh
Tender Value
48.27 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
15 days left
EMD
96540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Fencing Steel Gates And Misc Certain B/R Repair Work Of Nehru Enclave Under Ge (East) Lucknow

BOQ

Name of Work:- SPL REPAIR TO FENCING STEEL GATES AND MISC CERTAIN B/R REPAIR WORK OF NEHRU ENCLAVE UNDER GE (EAST) LUCKNOW
Sl. No. Item Description
1Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
2Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed
3Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
4Dismantling of post or strut embedded in concrete (wood, steel or RCC), any section including taking out embedded portion and making good the disturbed ground complete all as specified and directed.
5Dismantling of fencing wire mesh or barbed wire fencing, any type complete all as specified and directed.
6S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed.
7Labour only for restraining / repairs resecuring barbed wire including making good staples etc complete all as specified and directed.
8Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed..
9Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
10M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
11M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
12M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
13M & L for providing plain cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
14M & L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even & fair without using extra cement complete all as specified
15S & F of mild steel work in hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing of steps, wind ties, post and struts for fencing, flat iron fillets and the like including necessary cutting, drilling holes, notching etc. as required conforming to Fe-410W Grade E-250 complete all as specified and directed.
16S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering.Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides)and hanging; also fastening and fixing Fe-410-W(Gde-E-250)quality-B complete all as specified and directed.Note : Steel shall be procured directly from main produccers.
17M&L for 18-20 mm thick black / green Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in 20 mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
18Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
19S & F of 1.25mm thick mild steel plain black sheet in wall cladding, steel gate and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted and welded seams as required including bending or turning up, mitred angles etc. as required complete all as specified and directed.
20S&F Mild steel deformed bars/round bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.
21Supply only Chain Link MS galvanized fencing, powder coated ISI marked of any size and any type as approved complete all as specified and directed.Note : (a) Weight of chain link fencing shall be ascertain through BOO(b) Weight of chain link fencing shall not be less than 2.10 Kg/ Sqm
22Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete.
23M & L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5 cm long dia of neck 11 to 15 mm complete all as specified and directed.
24M & L for applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces including preparation of new or previously un treated surfaces of any description and at any position complete all as specified and directed.
25M & L for preparation of newly plastered surfaces of wall & applying two coat of cement base paint of approved shade/tint complete all as specified and directed.
26S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58550918
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48.27 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Fencing Steel Gates And Misc Certain B/R Repair Work Of Nehru Enclave Under Ge (East) Lucknow
Basic Detail
Tender No GE/E/LKO/T-108 OF 2026-27
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 48.27 Lakhs
Tender Fee 500
EMD 96540
Exemption Available
Document List
b60cc8ab-24eb-4686-a53d-2d3e0d7ee479.html
BOQ_896324.xls
Tendernotice_1.pdf
TenderT108.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

b60cc8ab-24eb-4686-a53d-2d3e0d7ee479.html

xls

BOQ_896324.xls

pdf

Tendernotice_1.pdf

pdf

TenderT108.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender