Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58550912

Tender For special Repair To Bldg No P-23/01 To 02 (02X Qtrs) And Bldg No P-109/01 To 02 (02X Qtrs) And Provision Of 05X Split Acs And 06X Geyser For Jco And Ors Otm/ Gma Of 8 Ew Bn Dabathwa Mil Stn Under Ge (Utility) Meerut Cantt.

Issued by Statutory Bodies & Commissions/Committees · Meerut, Uttar Pradesh
Tender Value
31.54 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
16 days left
EMD
63100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Bldg No P-23/01 To 02 (02X Qtrs) And Bldg No P-109/01 To 02 (02X Qtrs) And Provision Of 05X Split Acs And 06X Geyser For Jco And Ors Otm/ Gma Of 8 Ew Bn Dabathwa Mil Stn Under Ge (Utility) Meerut Cantt.

BOQ

Name of Work:- SPL REPAIR TO BLDG NO P-23/01 TO 02 (02X QTRS) AND BLDG NO P-109/01 TO 02 (02X QTRS) AND PROVISION OF 05X SPLIT ACS AND 06X GEYSER FOR JCO AND ORS OTM/ GMA OF 8 EW BN DABATHWA MIL STN UNDER GE (UTILITY) MEERUT CANTT.
Sl. No. Item Description
1Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed
2Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.
3Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n exc 1.5 sqm each complete with hold fasts etc complete all as specified and directed.
4Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
5Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed.
6Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.
7M&L for brick work with fly ash, old size bricks straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
8M&L brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
9M&L for rendering in cement mortar (1:6), 10mm thick on fair faces of brick work masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
10M&L for 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.
11M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 2 % by weight of cement on other than fair faces of brick masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (WPC measured and paid separately)
12M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.
13M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
14All as per item No 13 but on skirtings incl 10 mm thick backing coat in CM (1:4), complete all as specified and directed.
15M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.
16M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
17S & F steel reinforcement of TMT bars of size 10mm dia and over, cut to length, bent to shape as required including cranking, hooking ends & binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
18M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.
19M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
20Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing , complete all as specified and directed.
21S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive ofM.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.
22S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specified & directed.
23S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately), complete all as specified and directed.
24S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) skelton WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges, wire mesh and necessary S S screws shall be paid separately), complete all as specified and directed.
25S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.
26S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed.
27S&F aluminium glazed window shutters with fame, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium powder coated snap beading, screws, aluminium (powder coated) fittings such as handle clips (suitable size), locking device, and glazing in panels with 3.5mm thick coloured/tinted glass and gauged with 0.38mm dia, 1.40mm aperture SS wire mesh using Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified with fixing of iron grill 12mm square bar 100mm C/C directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt, complete all as specified and directed.
28S&F aluminium window and ventilator shutters, incl frame with wire mesh and sheet glass,fixed/openable type without sash bar alu section wt 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing anodised alu snap bedding screws etc complete all as specified and directed.
29Supply and fabrication of kitchen cupboards, shelf, shutter, partition etc made up of 16-18mm HDHMR board (Century/ Action Tesa/Kitply) with both side company pasted lamination (any colour) duly lipping (edge bending) on exposed surfaces complete with G profile handle of approved colour (01 No for each shutter) and soft closing hinges (02 Nos in each shutter) (Hettich/ Godrej/ IPSA) incl dismantling existing unserviceable boarding and thrown away from MOD area, complete all as specified and directed.
30S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples, complete all as specified and directed.
31S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed.
32S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.
33S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
34S&F hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screws complete all as specified and directed.
35S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy, complete all as specified and directed.
36S & F in repairs 150 mm long dual leg door stopper of alumunium alloy body fixing on door, complete all as specified and directed.
37S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed.
38S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of of brass,polished, complete all as specified and directed.
39S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
40Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
41Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
42S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
43S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
44Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
45Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
46Dismantling of existing unserviceable PVC water tank and S&F 500 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed.
47S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms), complete all as specified and directed.
48S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges, complete all as specified and directed.
49Supply and fixing in repair CP brass shower rose (4'' overhead ABS) with 225mm CP brass arm and flange, complete all as specified and directed.
50S&F in repair mirror of size 600 x 450 x 5.5 mm bevelled edge of selected quality PVC / aluminium moulded frames and back with fixing arrangement to wall complete all as specified and directed.
51S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.
52S&F in repair wash hand basins vitreous china, coloured flat back size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed.
53S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.
54S&F in repair, 15mm bore Brass CP mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed, complete all as specified and directed.
55S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
56S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.
57S&F in repair 15mm bore stop valves (concealed) fancy type, chromium plated cast copper alloy,with long shank and cap (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed
58Taking out old u/s water closet and S&F vitreous China \\"Orissa pattern\\" size 580 x 440mm\\" white, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed.
59Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.
60Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)
61S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.
62S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to laid in floors / trenches complete all as specified and directed.
63S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to laid in floors / trenches complete all as specified and directed.
64S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.
65S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
66S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
67S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.
68S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted.
69Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed.
70M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed (WPC will be measured and paid separately).
71M&L for roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed
72M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.
73Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep and getting out in soft/loose soil for laying of underground cables and other work complete all as specified and directed.
74Demolition and bracking up sewage pipe any type 150mm dia including side packing / haunching complete all as specified and directed.`
75M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed.
76M&L for SWG drain pipe grade 'A' 150mm dia laid in trenches incl jointing in CM 1:3 complete all as specified and directed.
77Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed.
78Removing excavated materials to a distance exc 100m but not exc 250m and depositing where directed,complete all as specified and directed.
79M&L for preparation of newly plastered surface of wall incl chalk liting on plastering surface, prepara-tory to distampers and apply two coats of oil bound distemper over a coat primer with 1mm thick wall putty, complete all as specified and directed.
80M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed
81M&L for prepration new plastered surface over a coat of putty applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified, complete all as specified and directed.
82M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed
83M&L for complete removal of existing treatment and preparation to old plastered surface of wall incl chalk whiting and apply two coats of oil bound distemper over a coat of primer over 1mm thick wall putty, complete all as specified and directed.
84S&F in repair 1mm thick stainless steel kitchen sink with drainage board with plugs, washers and waste coupling and PVC waste pipe including fixing on half brick wall or cantilever brackets(angle iron ) and connecting union overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed
85S&F in repair stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed..
86M & L for treating the top surface of filled earth at the rate of 5.0 litre of emulsion per Sqm of surface, using Chlropyraphas chemical complete all as specified and directed.
87M & L for Reinfoced cement concrete (Type B-1, 1:2:4, 20 mm graded aggregate) or cast-in-situ for in landings, cover slabs, selves of kitchen platform incl necessary form work set in with CM 1:6 (for manholes etc.), complete all as specified and directed.
88M & L for treating the under plinth protection(Min width 750mm) at the rate of 5.0 litre of emulsion per Sqm of surface ,using Chlropyraphas chemical complete all as specified and directed.
89Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. Please Enable Macros to View BoQ information
90Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc., complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58550912
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 31.54 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Bldg No P-23/01 To 02 (02X Qtrs) And Bldg No P-109/01 To 02 (02X Qtrs) And Provision Of 05X Split Acs And 06X Geyser For Jco And Ors Otm/ Gma Of 8 Ew Bn Dabathwa Mil Stn Under Ge (Utility) Meerut Cantt.
Basic Detail
Tender No 8877/E8
Bidding Type Tender
Location
City Meerut
State Uttar Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 31.54 Lakhs
Tender Fee 500
EMD 63100
Exemption Available
Document List
BOQ_896303.xls
CreditSchedule8877.pdf
d95aaf4f-c3c7-4d52-bb8f-b94c64a9b351.html
Makes8877.pdf
PS8877.pdf
Tender8877.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_896303.xls

pdf

CreditSchedule8877.pdf

html

d95aaf4f-c3c7-4d52-bb8f-b94c64a9b351.html

pdf

Makes8877.pdf

pdf

PS8877.pdf

pdf

Tender8877.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender