Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #58550911

Tender For special Repair To Wpc Doors And Windows In Bldg No 1 2 3 And 4 At Ra Bazar (Ss) Fafa Accn Under Ge (East) Lucknow

Issued by Statutory Bodies & Commissions/Committees · Lucknow, Uttar Pradesh
Tender Value
38.81 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
20 days left
EMD
77620
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair To Wpc Doors And Windows In Bldg No 1 2 3 And 4 At Ra Bazar (Ss) Fafa Accn Under Ge (East) Lucknow

BOQ

Name of Work:- SPL REPAIR TO WPC DOORS AND WINDOWS IN BLDG NO 1 2 3 AND 4 AT RA BAZAR (SS) FAFA ACCN UNDER GE (EAST) LUCKNOW
Sl. No. Item Description
1Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed.
2Taking down chowkhat with shutter (without taking off shutter from the frame) and area n.exc 1.50 sqm each, complete, all as specified & directed.
3S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. Note: (a) For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account. (b) Irrespective of whatever specified elsewhere in tender documents, the work related WPC doors / windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
4All as per item No 3 above but frame size 65X125 mm
5M & L for providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish complete all as specified and directed. Notes:-(a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- (format of MoU is enclosed with Appx A to NIT. (b) Irrespective of whatever specified elsewhere in tender documents, the work related WPC doors / windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
6Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC PRELEM DOOR SHUTTER with lamination consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XPM aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws and 2 mm thick edge moulding tape or 90 degree edge bend finish etc. complete all as specified and directed. Notes:-(a) Irrespective of whatever specified elsewhere in tender documents, the work related WPC doors / windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
7M & L for providing & fixing factorty made windows pre-painted steel powder coated (hot galvabised treatment) (Base steel as per IS 513 of 0.58mm thick \\"D\\" Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, SS stay handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10 mm square steel guard bars with 6\\"(152.4mm) pitch, complete for finished item of work. The windows should include proper cutout for AC/coolers and design & drawaings as approved by Engineer in Charge complete all specified and directed.Notes:-(a) Irrespective of whatever specified elsewhere in tender documents, the work related to windows shall be got executed through authorized executor of approved manufacturer’s only. The tri-party agreement between contractor, approved manufacturer and their authorized Applicator on Non Judicial Stamp paper of Rs 100/- shall be submitted before execution of work for approval of GE. Work will be executed only ofter approval aforesaid MoU
8S & F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all specified and directed.
9S & F Aluminium handles cast type anodised of 150mm complete all specified and directed.
10S & F 100mm size butt hinges, stainless steel, SS-304 garde and fixed complete all specified and directed.
11S & F 100mm Heavy Duty Stainless Steel SS-304 garde Self-Door closer Hinges , including Hardware Spring , Automatic self closing with positioning 90 Degress complete all specified and directed.
12S & F 100mm size Floor door stopper of aluminium alloy body and tongue, anodised, with rubber ends complete all specified and directed.
13S & F of 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all specified and directed.
14Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
15M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scafolding surface finished even and smooth with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.
16M&L for Self Curing Ready Mix Plaster of thickness 8 mm to 10 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, at any height with necessary scafolding surface finished even and smooth with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge
17M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed by Engr-in-Charge.
18M&L for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all specified and directed.
19M&L for 1-1.5 mm thick wall care putty to receive smooth finishes complete all as specified and directed.
20M & L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means only.
21Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means)
22Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
23M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all specified and directed.
24Demolition of Brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed.
25M & L for brick work with fly ash bricks, old size brick straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58550911
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.81 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Wpc Doors And Windows In Bldg No 1 2 3 And 4 At Ra Bazar (Ss) Fafa Accn Under Ge (East) Lucknow
Basic Detail
Tender No GE/E/LKO/T-112 OF 2026-27
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 07 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 38.81 Lakhs
Tender Fee 500
EMD 77620
Exemption Available
Document List
ae20d207-db87-4524-8303-f35e39d57f11.html
BOQ_896331.xls
Tendernotice_1.pdf
TenderT112.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

ae20d207-db87-4524-8303-f35e39d57f11.html

xls

BOQ_896331.xls

pdf

Tendernotice_1.pdf

pdf

TenderT112.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender