Tender For Interior Finishing Works Including Electrification Of Sub-Divisional Office Pakherpora
Tender Value
1.32 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
2640
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Interior Finishing Works Including Electrification Of Sub-Divisional Office Pakherpora
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing MDF board with PU for wall Paneling for the existing surfaces to be made out of 12mm thick ply framework backing with 8mm thick MDF board finished with PU machine polish including all the necessary surface preparations, final finish etc. complete of approved shade, color and texture including moulding of 3mm size all around the periphery as desired by Engineer-in Charge |
| 2 | Providing and fixing of wallpaper of approved sample as per pattern shown in drawing (excluding base of POP, Putty, Primer) incl. of adhesive etc complete as per drawing , pattern, shades, specifications and directions. |
| 3 | Provding and fixing one layer of 5mm matt/ gloss Pellican Systems PVC Ceiling Board with different size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels running at the spacing of 1200 mm centre to centre. |
| 4 | Providing and fixing of electrification items for subdivisional office Lighting point: One lighting point shall include wiing for lighting points in 1.5 square mm PVC insulated copper wire and 2.5 square mm PVC insulated multi strand copper wire for lighting, sub mains, 6 Amp one Way swith, 2mm thick, PVC conduit/ channel with bends Junction boxes, etc, 6 Amp S-pole MCB, 10 Amp DP MCB 2 way DP for housing MCB and Hylem sheet with wooden box recessed in walls with accessories |
| 5 | Heating points: one heating point shall include wiring for heating point is in 2.5 square mm PVC insulated multi strand copper wire and 4 square MM PVC insulated multi stand, copper wire for heating sub mains, 16 Amp switch socket combine, 2mm thick PVC conduit, channel with bends, Juncition boxes, etc, 10 AMP S Pole MCB, 2 way , Db for housing MCB and Hylem sheet with wooden box recessed in walls with accessories |
| 6 | Fan points: one fan point shall include wiring for lighting points in 1.5 square mm PVC insulated multi strand copper wire, 1200 mm ceiling fan/ 225 mm exhaust fan with ceiling roses and PVC square block, 350 watts electronic fan dimmer, 2 mm thick PVC conduit channel with bends, Junction boxes, etc., 6 Amo S pole MCB, 10 Amp DP MCB, two way DB for housing MCB for lighting circuits and Hylem sheet with wooden boxes, recessed in walls with accessories. |
| 7 | Providing and fixing bibcok of approved quality and make, heavy pattern, of 15mm nominal bore, complete with wall flange, nuts, washers and all necessary fitings, including cutting and making good the wall, testing and commissioning, complete in all respects as directed by the Engineer-in-charge |
| 8 | Providing and fixing chromium plated brass wall- mounted mixer tap of approved quality and make, 15mm nominal bore, complete with hot and cold water inlets, spout, wall flanges, including cutting and making good the wall, testing and commissioning, complete in all respects as directed by Engineer-in-charge complete job |
| 9 | Providing and fixing basin sink for kitchen incl. all carriages complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender