Tender For Name Of Work:- : Maintenance Of Buildings Drilling Of 02 Number Borewells With Connected Accessories At Required Locations In Uoh Campus
Tender Value
13.81 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
5 days left
EMD
27636
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranga Reddy → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work:- : Maintenance Of Buildings Drilling Of 02 Number Borewells With Connected Accessories At Required Locations In Uoh Campus
BOQ
| Sl. No. | Item Description |
| 1 | 1) The estimated amount is inclusive of GST. 2) The Bidder should quote basic rates exclusive of GST and quote GST percentage separately. GST should be revised from time to time. |
| 2 | Drilling of bore well of 61/2 dia with Hydraulic Rig vertically in the ground inculding Ground water investigation point for each borewell to be carryout by the L1 bidder while drilling of borewell. The rates quoted by the bidder against boring shall be deemed to be included for Ground water investigation/survey. 1 Feet to 100 Feets |
| 3 | 101 Feet to 200 Feets |
| 4 | 201 Feet to 300 Feets |
| 5 | 301 Feet to 400 Feets |
| 6 | 401 Feet to 500 Feets |
| 7 | 501 Feet to 600 Feets |
| 8 | 601 Feet to 700 Feets |
| 9 | 701 Feet to 800 Feets |
| 10 | 801 Feets to 900 Feets |
| 11 | Transport & Labour Charges |
| 12 | Supply and fixing of PVC casing of 7'' dia 6 1/2\\"Bore well (100 feets) |
| 13 | Supply and fixing of PVC casing of 10'' dia 6 1/2\\"Bore well (20 feets) |
| 14 | Supply and lowering of HDPE pipe of 50mm Outer dia, not less than 16 Kg/cm2 for bore well pump set tube well including all accessories like SS pipe piece with SS bolt nuts with necessary oil joint etc., for installing the vertical submersible pumpset in borewell i/c making connections with submersible pump set and delivery line complete as required. |
| 15 | Supply and fixing of 3 Core X 6 Sqmm under water 3 core flat cable along with HDPE pipe incl tying for submersible pump set including jointing and connections sq.cable. |
| 16 | Supply and fixing of 5 HP, capacity 42- 50 stages V 4/6, 3 phases submersible pump and motor of 40mm dia complete as required |
| 17 | SITC of Outdoor control panel with inbuild Electronic starter with single phase & over load protection, Dry run stop, Auto-start feature (ON&OFF timer) with 4 pole MCB & metal stands provided as legs etc as required. |
| 18 | Supply and laying of 4 coreX 10 sqmm Aluminium conductor pvc insulated armouned UG cable including excavation (below 75cm from ground level) and providing of protecting covering and refilling the trench etc complete as required. |
| 19 | Supply and laying of HDPE pipe of size 40 mm outer dia not less than 10 kg/ cmsq for delivery line incl all accessories like SS pipe piece with SS bolt nuts with necessary oil joint etc. |
| 20 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 21 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore Horizontal |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge: 32 mm nominal dia Pipes |
| 24 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 40 mm nominal bore |
| 25 | Providing and fixing CPVC ball valve of following size of approved quality, High or low pressure, with plastic floats complete : 32 mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender