Tender For Laying Of New Pipeline And Associated Equipments For Hydrant And Sprinkler System Of Academic Building, Nursing College, Admin Building, And Auditorium At Aiims, Bhubaneswar.
Tender Value
2.58 Crore
Estimated cost
Bid Submission
08 Dec 2026
20 days left
EMD
5.17 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Of New Pipeline And Associated Equipments For Hydrant And Sprinkler System Of Academic Building, Nursing College, Admin Building, And Auditorium At Aiims, Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Providing laying, testing & commissioning of 'C' 200 mm dia (6.3 mm wall thickness) class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. |
| 2 | Providing laying, testing & commissioning of 'C' 150 mm dia (6.3 mm wall thickness) class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. |
| 3 | Providing, laying, testing & commissioning of 'C' class 25 mm dia heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting (Providing two coats of synthetic enamel paint of approved shade over a coat of suitable primer as per paint manufacture recommedation. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the EIC. Total film thickness of paint shall not be less than 100 microns as per the IS1477). |
| 4 | Providing, laying, testing & commissioning of 'C' class 80 mm dia heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting (Providing two coats of synthetic enamel paint of approved shade over a coat of suitable primer as per paint manufacture recommedation. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the EIC. Total film thickness of paint shall not be less than 100 microns as per the IS1477). |
| 5 | Providing, laying, testing & commissioning of 'C' class 150 mm dia heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting (Providing two coats of synthetic enamel paint of approved shade over a coat of suitable primer as per paint manufacture recommedation. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the EIC. Total film thickness of paint shall not be less than 100 microns as per the IS1477). |
| 6 | Providing, laying, testing & commissioning of 'C' class 200 mm dia (6.3 mm wall thickness) heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting (Providing two coats of synthetic enamel paint of approved shade over a coat of suitable primer as per paint manufacture recommedation. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the EIC. Total film thickness of paint shall not be less than 100 microns as per the IS1477). |
| 7 | Supplying, fixing, testing and commissioning of 80 mm butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095. |
| 8 | Supplying, fixing, testing and commissioning of 150 mm butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095. |
| 9 | Supplying, fixing, testing & commissioning of 80 mm double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780. |
| 10 | Supplying, fixing, testing & commissioning of 150 mm double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780. |
| 11 | Supplying, fixing, testing & commissioning of 200 mm double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780. |
| 12 | Providing, installation, testing and commissioning of 150 mm (Dual Disc type) non-return valve confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc. as required. |
| 13 | Providing, fixing, testing & commissioning of installation 150 mm dia control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required: |
| 14 | Supplying and fixing of 4 way - 150 mm dia M.S. Pipe fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: |
| 15 | Providing and fixing in position industrial type pressure gauges with gun metal / brass valves complete etc. as required. |
| 16 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 20 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 21 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete |
| 23 | Providing & fixing 25 mm Brass air release valve with silicon rubber seal, high temperature resistant polyethylene, having maximum working pressure of 10 bar in the pipeline includes isolating valve with all necessary accessories all complete as per direction of the Engineer in charge. |
| 24 | Providing 25 mm dia heavy quality Ball valve with forged brass hard chrome plated ball & teflon seat of approved quality with all accessories as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender