Tender For Major Overhauling, Repair And Maintenance Of 08 Nos. Bypass Gates At Sharda Power House, Lohiahead, Khatima
Tender Value
1.52 Crore
Estimated cost
Bid Submission
07 Dec 2026
17 days left
EMD
3.36 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udam Singh Nagar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Major Overhauling, Repair And Maintenance Of 08 Nos. Bypass Gates At Sharda Power House, Lohiahead, Khatima
BOQ
| Sl. No. | Item Description |
| 1 | Major Overhauling, Repair and Maintenance of 08 Nos. Bypass Gates |
| 2 | Arrangement of specialized equipment such as high pressure water jetting system, LP air compressor, hoses, complete unit, grout mixture, grout pump with gauge, small H.P guns to inject grout, surface cutting and welding set, flood lights, grinder,cutters, valves, hoses & Pneumatic chippers for completing the work with to and fro carriage and transportation and setup as per site required. |
| 3 | Providing and fixing of suitable steel channels in the existing groove provided for wooden logs, for temporary installation and fixing of the Stoplog Gate during maintenance works of the bypass gates, including cutting, drilling, fixing, alignment and all necessary material, labour, T&P, machinery and transportation, complete in all respects. |
| 4 | Fabricating and Installing Stoplog Gate in the groove provided for wooden logs after fixing the steel channels, for carrying out maintenance works of the bypass gates, including all cost of material, labour, machinery, T&P, lifting/handling and transportation, complete in all respects. |
| 5 | Providing, fabricating and erecting gantry arrangements using girders/structural steel sections, angles at all 08 gate grooves for lifting, lowering, handling, positioning and fixing the Stoplog Gate in each groove, including cutting, drilling, welding, fabrication, fixing etc included with all cost of material, labour, T&P, machinery, lifting/handling equipment and transportation, complete in all respects. |
| 6 | Testing, inspection and alignment of the Stoplog Gate after installation in the groove, including checking of proper seating, alignment and smooth operation of the gate, with all necessary materials, labour, T&P, equipment and consumables, complete in all respects at site. |
| 7 | Providing and making suitable access path for Hydra crane from the downstream side of the bypass gates, including labour, materials, consumables, minor works and T&P required for making the path suitable for movement and operation of the Hydra crane, complete in all respects. |
| 8 | Hiring, providing and deploying hydra crane of suitable capacity for lifting, lowering, handling, positioning, holding and alignment of bypass gate components during dismantling and erection work. |
| 9 | Dismantling of the existing hoist arrangement with its platform to execute maintenance works on bypass gate, including removal, lowering, handling dismantled components i/c with all cost of material, labour, T&P and transportation, complete in all respects. |
| 10 | Taken out the gate with the help of hydra crane from the gate groove to facilitate execution of maintenance works including all cost of material, labour, T&P and transportation to complete the work. |
| 11 | Replacement of Roller assembly of bypsss gates after dismantling the damaged, broken, defective and missing existing roller assembly with new cast steel roller assembly with proper lubrication, with true balancing and alignment to ensure proper and smooth operation of gates including all cost of material, casting, machining, labour, T&P and transportation to complete the work.Total assembly in one gate= 8 nosHence total assemblies = 8 x 8 = 64 Nos. |
| 12 | Providing & Fixing of new rubber seal after distmantling the existing old & worn out rubber seal musical knot and flat from gate by gas cuttuing old rusted, jammed out bolts and clamping plate and fitting new musical knot and flat rubber seal with SS nut bolts and clamping plate including all cost of material, labour, T&P, Scaffolding and transportation to complete the work. |
| 13 | Dismantling and removing the existing SS sill plate from the surface of the sill beam of the bypass gates, including all cost of material, labour, consumables and T&P, complete in all respects. |
| 14 | Replacement of SS sill Plate with new one after surface preparation of the sill beam i/c all cost of material, labour, consumables and T&P to complete the work. |
| 15 | Surface preparation by Sand blasting of old and rusted surface of gates and applying two coats of zinc primer and three coats of coal tar epoxy paint on 8 Nos. bypass gates including all cost of material and labour, Transportation and T&P etc. |
| 16 | Erection of gates with proper Alignment and balancing of the gates with respect to the hoist after adjusting the wire rope pulleys and wire rope to ensure smooth operation and sitting of the gate throughout the length including cost of labour, consumables etc to complete the job. |
| 17 | Supplying & Replacement of damaged/worn-out steel wire-rope drums with new drums, alignment and adjustment, with all necessary material, labour, machinery, T&P and transportation, complete in all respects. |
| 18 | Overhauling/Repairing of hoist parts such as gear box assembly, oil resistant sealing in gear box, spindle shaft, Radicon assembly, hand drive unit, plummer blocks, pinion etc after dismantling and making proper aggrangement for it by changing defective/ missing parts/ bolts etc, changing gear oil with complete lubrication of Radicon and gear drum with alignment i/c all cost of material, labour, transportation and T&P. |
| 19 | Replacement of steel wire rope 18mm thick of hoist mechanism of 8 Nos. gates after dismantling the damaged/worn out wire rope and fixing new one with proper alignment with all cost of material, labour, transportation and T&P to complete the job. |
| 20 | Applying Cardimum Compound on Steel wire rope with the help jhula arrangement and safety measures including all cost of material, transportation & labour, T&P etc. |
| 21 | Erection and installation of the dismantled hoist arrangement at its original position after completion of the maintenance works, including proper alignment, fixing, testing and adjustment, with all necessary material, labour, transportation and T&P, complete in all respects. |
| 22 | Testing, inspection and alignment of the bypass gate after installation of gate in their gooves, i/c checking of proper seating, smooth operation and alignment with the hoisting mechanismwith all necessary materials, labour, T&P, equipment, consumables etc in all respects at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender