Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58549314

Tender For Special Repair To Ahsp Bldg No 149D At Cqa (W) Jabalpur Under Ge (P) No.1 Jabalpur

Issued by Statutory Bodies & Commissions/Committees · Jabalpur, Madhya Pradesh
Tender Value
38.68 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
77400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Special Repair To Ahsp Bldg No 149D At Cqa (W) Jabalpur Under Ge (P) No.1 Jabalpur

BOQ

Name of Work:- SPL REPAIR TO AHSP BLDG NO 149D AT CQA (W) JABALPUR UNDER GE (P) No.1 JABALPUR
Sl. No. Item Description
1Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. Including Tile Bedding layers and removing out side MD Land complete all as specified and directed.
2M&L for PCC (1:2:4) Type B0 using 12.5 mm graded Agg as in Padding/Leveling Course over Roof/Under Floor Etc complete all as specified and directed.
3Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
4M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM in 1:4 finished even and fair without using etra cement. complete all as specified and directed.
5M&L for rendering 5 mm thick in C:M 1:3 on Ceiling in patches and finishes and smooth without using extra cement complete all as specified and directed
6S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed
7S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM(1:6) complete all as specified and directed
8M&L for vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.
9~ditto~ all as per item No.8 but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.
10Taking down chowkhat with shutter not exc 1.5 sqm each complete all as specified and directed.
11~ditto~ all as per item No.10 but exc 1.5 sqm but nexc 4.0 sqm each complete all as specified and directed.
12M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed
13Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed.
14S&F repair vitreous china urinal half stall type white excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.
15S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including flushing cistern and flush pipe fixed in repairs complete all as specified and directed.
16S&F PVC vitreous china wash down closet pan pedestral pattern with P or S trap white fixed Including seat cover, flushing cistern etc complete all as specified and directed.
17M&L for Cudappah stone slab on cooking platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and directed.
18M&L for Granite (of any type ) slab/tiles as cooking platform/shelf 16-18mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete all as specified and directed.
19S&F in repairs cascade duel flush one peace inbuilt flushing cistern vitreous china wash down water closet pan padestel pattern white including soft seat cover, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.
20M&L for Vitreous china WHB 550x400mm(oval type) including cutting pinning in end of brackets brackets , fixing flat back or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed.
21S&F in repair for Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete all as specified and directed.
22S&F for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
23S&F in repair Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed.
24S&F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.
25S&F in repair for fency type chromium plated Stop valves,(angle Cock) cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specified and directed.
26S&F for PVC connections 15 mm size with PTMT nuts of length 600mm fixedcomplete all as specified and directed.
27S&F for 600mmx450mm mirror of selected quality glass, mounted on 5mm thick pvc board and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and directed.
28S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed.
29S&F Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
30S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls incl clamps and necessary fittings complete all as specified and directed.
31S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
32S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
33S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.
34PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.
35PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed.
36PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed.
37S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour prelaminated PVC sheet reinforced with M.S square tube in opening as per specification including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed.
38S&F Factory made solid panel PVC prelaminated door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
39S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,complete all as specified and directed.
40S&F for 4.8 mm thick ordinary glass and glazing with oil putty in square area exc 0.50 sqm in each pane complete all as specified and directed.
41Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 40 x 58 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified.(incl Glass and SS 0.36 mm dia 1.18 mm aperture Wire mesh)
42S&F Aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick) around the opening, complete all as specified and directed.
43S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed.
44S&F in repaies, Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
45S&F in repaies, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 18-19 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) .
46S&F in repaies, Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard /Wardrobe 12mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately).
47S&F SS butt hinges100mm long medium weight, cold rolled. complete all as specified and directed.
48S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised. complete all as specified and directed.
49S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised. complete all as specified and directed.
50S&F brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
51S&F brass chromium plated towel ring 20mm dia, round type, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed
52S&F 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
53Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
54M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
55M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4)as in half brick complete all as specified and directed.
56Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe complete all as specified and directed.
57Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed.
58Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed.
59S&F 15mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
60S&F 20mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
61S&F 25mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
62Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
63S&F, HDPE Pipes PN4 10 of 150mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls incl fittings like bends, clamps etc complete all as specified and directed.
64M&L for two coat of synthetic enamel paint over new/old steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxzide primer incl preparation of surfaces complete all as specified and directed.
65S&F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specified and directed.
66M&L for Complete removal of existing treatment on walls including steel wire brushing and scraping etc and applying wall care putty on wall surfaces including rubbing, levelling and preparing the surfaces for receiving further finishes complete all as specified and directed.
67M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash. complete all as specified and directed.
68Material & Labour for preparation of new/old external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of wall care putty incl removing of existing treatment etc .complete all as specified and as directed.
69M&L for prepareation of new/Old internal surfaces of wall and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.,over a coat of primer over wall care putty incl removing of existing treatment etc complete all as specified and directed.
70M&L for 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
71M&L for complete removal of existing water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land complete all as specified and directed.
72M&L for Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed.
73M&L for 10 mm thick rendering on roof surfaces/concrete surface in CM 1:3 complete all as specified and directed.
74M&L for Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. complete all as specified and directed.
75Laying unrolled over the bitumen coated surface,3 mm thick polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed .
76S&F of Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed.
77Supply only liquid water proofing compound complete all as specified and directed
78Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site complete all as specified and directed.
79Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site complete all as specified and directed.
80M&L for Cleaning and removing all scale and dirt etc from tanks of capacity exc 500 Ltr & n exc 1000 Ltr and from mounts of circulating, pipes, etc 20mm dia float ball complete all as specified and directed.
81S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr three layer including 20mm dia float ball hoisted and fixed in position complete all as specified and directed.
82S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr three layer including 20mm dia float ball hoisted and fixed in position complete all as specified and directed.
83Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to factory store and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.Note :-1. Contractor has to submit existing bldg inventory items having details of serviceable and unsearviceable and physically verified with JE E/M during the handing taking of sites and before commencement of work.2. If work commence without signing of E/M inventory then contractor will be solely responsible for missing of E/M items and decision of engr-in-charge will be final in this regard.3. All E/M items received from site as a schedule of credit should be stores at location decided by engr-in-charge and should be taken out from bldg premises / stored location with confirmation to engr-in-charge
84M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light and fan points complete all as specified and directed.
85(a) One light point/fan point controlled by one switch. complete all as specified and directed.
86(b) One switch socket combination out let 5 Amps on independent board. complete all as specified and directed.
87(c) One Call bell Point Controlled by one bell Push. complete all as specified and directed.
88(d) One socket out let 5 Amps on the same board with other switches. complete all as specified and directed.
89~ditto~ all as per item No 81 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board complete all as specified and directed..
90~ditto~ all as per item No 81 above but with 4 sqmm PVC insulated multi stranded copper conductor and 4 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board complete all as specified and directed..
91Supply & Fixing Modular type Switch single pole 16 Amps one way complete all as specified and directed.
92Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps. complete all as specified and directed.
93Supply & Fixing Modular type Socket out let 6 Amps. complete all as specified and directed.
94Supply & Fixing Modular type Bell Push single pole 6 Amps one way complete all as specified and directed.
95Supply and fixing Bell, AC, Ding Dong type 230 Volt. complete all as specified and directed.
96Supply and fixing Fan step type Regulator modular type, 120 watts, 230 Volt. complete all as specified and directed.
97Supply & Fixing Modular type Switch single pole 6 Amps one way complete all as specified and directed.
98Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals. complete all as specified and directed.
99Supply and Fixing lamp holder Surface PVC type complete all as specified and directed.
100Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed.
101Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete all as specified and directed.
102S&F LED light fitting 1x9W/1X10Wbulkhead Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
103Supply and fixing in repair Security lighting luminaire for use with LED lamps, of capacity not less than 35/36 Watts IP-65, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, complete with control gear and all accessories fixed with 25/40 mm bore medium grade GI Pipe Bracket 1.5 mtr long bent to shape, fixed on wall with MS Flat Clamps, nuts & Bolts as required complete all as specified and directed.
104Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 22 watt, natural white, 2200 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed.
105Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
106Taking down Old un serviceable DB/Switch fuses complete with all accessories, any type/capacity complete, after disconecting cable connection, and remove to factory store. complete all as specified and directed.
107Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed. (Note : MCBs will be Measured separately)
108Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed. (Note : MCBs will be Measured separately)
109Supply and Fixing MCB, SPN, 230 Volt of capacity upto 32 Amps(as ordered), 10 KA 'C' series complete all as specified and directed.
110Supply and Fixing MCB, SP, 230 Volt of capacity 6 to 32 Amps(as ordered), 10 KA 'C' series complete all as specified and directed..
111M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sq mm in and including/drawing through through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth. complete all as specified and directed.(Note :- 2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)
112Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate.
113Taking down sub main wiring any size of two single core aluminium/ copper conductor cable PVC insulated alongwith/ without conduit and accessories and removing from site, making good the disturbed surfaces of wall and floor/ ceiling etc.,complete all as specified and directed.
114Schedule of credit of Amount Rs.28,360.00 to be deducted during AOC. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58549314
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.68 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Ahsp Bldg No 149D At Cqa (W) Jabalpur Under Ge (P) No.1 Jabalpur
Basic Detail
Tender No 8639/CQA/E8
Bidding Type Tender
Location
City Jabalpur
State Madhya Pradesh
Key Dates
Publish Date 16 Nov 2026
Submission Date 30 Nov 2026
Open Date 07 Dec 2026
Finance
Tender Value 38.68 Lakhs
Tender Fee 500
EMD 77400
Exemption Not Available
Document List
8639TenderDocuments.pdf
88069baa-e743-4370-8587-db11dac13463.html
BOQ_896286.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
pdf

8639TenderDocuments.pdf

html

88069baa-e743-4370-8587-db11dac13463.html

xls

BOQ_896286.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender