Defence Government Departments Closing in 2 days TDR #58549257

Tender For Repair/ Renovation Of Qtr. No. 04 Block Ngo Phq, Qtr. No. 08 Block Ngo-05, Qtr. No. 10 Block Ngo-05 Phq, Qtr. No. 14 Block Ngo-02 Phq, Qtr. No. 12 Block Ngo-05 Phq, Qtr. No. 11 Block Ngo Phq, Qtr. No. 14 Block Ngo Phq, Qtr. No. 32 Block Ngo Phq

Issued by Government Departments · srinagar, Jammu and Kashmir
Tender Value
17.77 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
35540
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair/ Renovation Of Qtr. No. 04 Block Ngo Phq, Qtr. No. 08 Block Ngo-05, Qtr. No. 10 Block Ngo-05 Phq, Qtr. No. 14 Block Ngo-02 Phq, Qtr. No. 12 Block Ngo-05 Phq, Qtr. No. 11 Block Ngo Phq, Qtr. No. 14 Block Ngo Phq, Qtr. No. 32 Block Ngo Phqqtr. No. 16 Block-09 At Gulshan Ground Jammu Under Account Head Minor Civil And Electrical Works In Demand 51 Police

BOQ

Name of Work:- Repair/ renovation of Qtr. No. 04 block NGO PHQ, Qtr. No. 08 block NGO-05, Qtr. No. 10 block NGO-05 PHQ, Qtr. No. 14 block NGO-02 PHQ, Qtr. No. 12 block NGO-05 PHQ, Qtr. No. 11 block NGO PHQ, Qtr. No. 14 block NGO PHQ, Qtr. No. 32 block NGO PHQQtr. No. 16 block-09 at Gulshan Ground Jammu under Account Head Minor Civil and Electrical works in Demand 51 Police
Sl. No. Item Description
1Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand).
2Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete.
3Engagement of labour skilled/ unskilled for various dismantling works like tacking of floors, damaged tiles, etc including stacking of serviceable material as directed by EIC and disposal of unserviceable material up to 50 mtr lead.
4Labour
5Masson
6Carpenter
7Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
8Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with ISI marked M.S. pressed butt hinges bright finished of required
9Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood
10Providing and fixing of wardrobe of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)
11Providing and fixing 1st quality ceramic glazed tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
12Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown
13Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
14Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick
15Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats
16Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
17Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
18Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.
19Providing and fixing of PVC waste pipe with coupling of approved make and manufacture as directed by EIC
20Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
21Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 18.32.1 Circular shape 450 mm dia. Rectangular shape 453x357 mm
22Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
23Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
24Providing and fixing of Exhaust fan with allied accessories complete including necessary terminations crompton/ Anchor/Orient/Usha or equivalent make.
25Providing and fixing of C P Wall mixer of approved brand and manufacture (Jaquar, Kerovit, Hindware or equivqlent make) as directed by EIC
26Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 470x420mm bowl depth 178mm
27Providing and fixing of switches, Sockets, MCB's, Tube lite, wires, Fans, exhaust fan and other allied works etc which is required during excution of work as required complete Job by the direction of Engineer In Charge.
28Carriage of material by MT including loading and unloading complete.
29Sand avg. lead 15 Km. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58549257
AUTHORITY Government Departments
TENDER VALUE 17.77 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Head Quarters
Work Description Tender For Repair/ Renovation Of Qtr. No. 04 Block Ngo Phq, Qtr. No. 08 Block Ngo-05, Qtr. No. 10 Block Ngo-05 Phq, Qtr. No. 14 Block Ngo-02 Phq, Qtr. No. 12 Block Ngo-05 Phq, Qtr. No. 11 Block Ngo Phq, Qtr. No. 14 Block Ngo Phq, Qtr. No. 32 Block Ngo Phqqtr. No. 16 Block-09 At Gulshan Ground Jammu Under Account Head Minor Civil And Electrical Works In Demand 51 Police
Basic Detail
Tender No e-NIT/EE-PCD/PHQ/117/2026-27
Bidding Type Tender
Location
City srinagar
State Jammu and Kashmir
Key Dates
Publish Date 16 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 17.77 Lakhs
Tender Fee 1500
EMD 35540
Exemption Not Available
Document List
7ff0890a-c8ab-4ca7-9887-0dabb9c4473c.html
BOQ_1124298.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

7ff0890a-c8ab-4ca7-9887-0dabb9c4473c.html

xls

BOQ_1124298.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender