Defence Government Departments Closing in 2 days TDR #58549244

Tender For Repair/ Renovation Of Of G.Os Mess At Apc Zewan Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police. Police.

Issued by Government Departments · srinagar, Jammu and Kashmir
Tender Value
27.36 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
54720
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair/ Renovation Of Of G.Os Mess At Apc Zewan Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police. Police.

BOQ

Name of Work:- Repair/ renovation of of G.Os Mess at APC Zewan Srinagar under Account Head Minor Civil and Electrical works in Demand 51 Police. Police.
Sl. No. Item Description
1Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix)
2Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
3Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10 mm to 25 mm (5mm thick)
4Providing and fixing of CP fitting of Haquar/Cera Make 15mm nominal bore.
5Angle valve
6Bib Cock
7Basin Mixer
8Wall Mixer
9CP grating 100mm size
10Towel Rod
11Soap Case
12PVC Connection 1'-6\\" long
13Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
14Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
15Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
16Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
17Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level flushing cistern, including all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (One piece) as directed by EIC
18Provding and fixing of PVC Soil waste and vent pipes of approved manufacture and brand (type-B) incluidng jointing with adhesive complete.
19100mm dia
2075mm dia
21Providing and fixing of fitting to PVC Soil waste pipes of approved amnufactuire and brand (type-B)
22100mm dia plain bend
23100mm dia floor trap
2475mm dia plain bend
25Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)
26Providing and fixing of Hot water heater Geyser 50 ltrs of approved make like venus, Jupiton, Racold or equivalent make including all necessary fittings complete Job.
2715mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement: 6 fine sand)
28Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.
29Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown
30Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
31Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick
32Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
33Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kail wood
34Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws First class kail wood
35Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second kail wood
36Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
37Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
38Providing and fixing of wardrobe 24\\" deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job)
39Providing and fixing of 12mm thick Imported wooden panelling incluidng cost of necessary 12mm ply wood/ budloo wood in frame work and touch wood complete Job.
40Providing and fixing of 40mm x40mm wooden moulded cornice with touch wood coat complete.
41Providing and fiixng of 8mm thick laminated floor panels (AC4) of standard manufacture including cost of cornice complete Job as directed by EIC
42Providing and fixing of PVC panelling of approved make in ceiling and walls of Rooms including necessary frame work and cornice complete as directed by EIC
43Providing and fixing of following types of switches, sockets, with Gang box and allied accessories including dismantling of existing switches and sockets with terminations as required.
446A switch only piano type
456A socket only piano type
4616 A piano switch socket combined with PVC box
476 A Modular switch
486 A Modular socket
4916 A Modular switch socket combined with gang box
50Rewiring for light point/ fan point/ exhaust fan point/ call bell point including 1.5 sq.mm FR PVC insulated copper conductor single core cable as required for restoration of the supply in existing surface / recessed steel/medium class PVC conduit
51Group A
52Group B
53Group C
54Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required (as per Schedule) Finolex/Polycab/Havells/ Anchor/KEI make
552 x 2.5 Sqmm
562 x 4 sqmm
572 x 6 sqmm
582 x 10 sqmm
59Supply and fixing of following sizes moduler base Plate and cover plate on existing modular metal boxes etc as required for moduler swtiches
6012 Modular
618 Modular
626 Modular
634 Modular
64Providing and fixing of following type of MCB's/switch gear of 10 KA or more capacity series including testing and necessary terminations.
6563 A DP
6632 A DP
676A-32A MCB's
68Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current ratings.
6916 way SPN
7008 way SPN
71Providing and fixing of LED lights of following type including necessary terminations as required.
72T-5 LED 4' long 20 watt
73T-5 LED 2' long 9 watt
7412 watt concealed/ surface LED panel lights
7512 Watt LED Lamps
76Providing and fixing of fan dimmers of Piano type heavy duty heavy duty.
77Providing and fixing of two modular stepped type fan dimmers including necessary terminations as requried
78Providing and fixing of 48\\" Sweep ceiling fan, 3 blade with allied accessories complete including necessary terminations
79Providing and fixing of Angle/straight holders including terminations
80Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc.
81Providing and fixing of 400mm Sweep wall fan with allied accessories complete including necessary terminations
82Providing and fixing of exhaust 150mm Shutter type including terminations as required
83Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens.
841\\" wide surface batten 6 feet long
851.5\\" wide surface batten 6 feet long
86Supply & laying of following unarmoured, PVC insulated, aluminium cables.
8725 sqmm 2- core
88Supply,assembling,installation of (as per approved sample) 30 watt LED flood Light powder coated, pressure die cast aluminium housing with heat sink IP 66 protected, with i/p AC90-300V.
89Carriage of material by mechanical transport including all loading / unloading complete
90Sand Aveg. lead of 15 Km
91Stone Agg. Aveg. lead of 15 Km Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58549244
AUTHORITY Government Departments
TENDER VALUE 27.36 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Head Quarters
Work Description Tender For Repair/ Renovation Of Of G.Os Mess At Apc Zewan Srinagar Under Account Head Minor Civil And Electrical Works In Demand 51 Police. Police.
Basic Detail
Tender No e-NIT/EE-PCD/PHQ/118/2026-27
Bidding Type Tender
Location
City srinagar
State Jammu and Kashmir
Key Dates
Publish Date 16 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 27.36 Lakhs
Tender Fee 2000
EMD 54720
Exemption Not Available
Document List
b99da657-8c2f-44e9-a7d2-4513ea214617.html
BOQ_1124299.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

b99da657-8c2f-44e9-a7d2-4513ea214617.html

xls

BOQ_1124299.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender