Tender For Errection Of 135 Foot High Flag At Udgir For Municipal Council Udgir
Tender Value
48.82 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
4 days left
EMD
48821
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Latur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Errection Of 135 Foot High Flag At Udgir For Municipal Council Udgir
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work : Proposed Beautification & Landscape Development Of Guest House Flag Pole For Municipal Council Udgir |
| 2 | Supply and Erection the Flag mast of 45M high mast in Five sections with arrangment mounting of Flag along with head frame suitable for wind speed of 50m/s with Accessories. The mast shall be fabricated from special steel plates, conforming to S 355 grade as per BS-EN10-025, cut and folded to form a polygonal section welded. The welding is in accordance with BS 5135. At site the section shall be joined together by slip-stressed-fit method. No side welding or bolted joint shall be done on the mast. The minimum overlap distance shall be 1.5 times the diameter at penetration. The mast shall be provided with fully penetrated flange, which is free from any lamination or incursion. For the environmental protection of the mast, the entire fabricated mast shall be hot dip galvanized, internally and externally as per BS EN ISO 1461. Suitable for wind velocity as per IS875. After Galvanization, mast should be PU painted with eaching primer and white PU paint. An adequate door opening shall be provided at the base of the mast and the opening is such that it permits clear access to equipment like winches, cables, plug and socket, etc. and also facilitates easy removal of the winch if required. Flagmast includes system for Raising Lowering of Flag. It shall have double drum winch, 6 mm dia stainless steel wire rope and integral power tool for the raising and lowering of Flag. Suitable control panel shall be provided for reversing operation of Power tool motor.Also arrangement for fixing LED aviation system. The door opening shall be complete with a close fitting, vandal resistant, eatherproof door, provided with heavy-duty double internal lock with special paddle key. SITC of low intensity aviation system. Ledwatch 230 ‘A’ inbuilt - photo switch. Design conforming to ‘ICAO’ annex 14. Aviation lamp included 300 nos superbright LEDS in red color. Input working voltage 230V AC (+/- 10 %) Light intensity of the lamp > 10 candela @ 360°. Power consumption should be < 09 watts. Number of circuits are six in series / parallel. Average burning life of lamp should be 100000 hrs. PIV protection upto 1kv, IP rating should be IP-65 as per is-13947 ( part-1) 1993. Body material of the lamp should be pressure cast aluminum and dome should be in red color with transparent polycarbonate with endless neoprene gasket. All over finishing of the lamp is golden yellow powder coated with 60 micron thick. Connecting lids of lamp with connector upto 01 mtr For 3C x 2.5 Sqmm Cu armoured cable. Lamp should be mount 1/2\\" x 6\\" G.I. barrel nipple with washers & chucknuts. Erection of the Flag mast with the help of suitable and required equipments, and assembling all operating system. Assembly of all sections and installing it on the foundation. All electrical connections and installation of flag to the mast and giving successful trial. Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. SITC of 350W LED Flood Light with Matt black polyester powder coated pressure die‐cast aluminum housing and frame with heat resistant toughened clear glass fixed with SS screw. LEDs are provided with secondary lens optics to get optimum optical performance. The obstruction lamp with ‘A’ type driver used is specially designed to have - built‐in surge voltage, open/short circuit protections. External surge protection provided for additional safety. Luminaire is provided with a MS mounting bracket fixed on pressure die‐cast aluminum housing for aiming adjustment. Input working voltage should be 100V to 277V AC, Maintenance of lumen output is 50000hrs andworking temperature range is -20°C to +45°C. External Surge Protection should be 10Kv and Ingress Protection IP-66. |
| 3 | SITC of wheeled HDEP container for StoreThe National Flag of India |
| 4 | Supply National Flag of India, accordance with the guidelines of the Flag Code of India with \\"D\\" Hooks, - Size: 24 Feet x 36 Feet (There is no warranty on Flag Cloth) |
| 5 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means |
| 6 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M25 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying Cast in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite / gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel - stanchions etc. including bailing out water, Steel centering formwork, laying / pumping coverblocks, compaction and curing roughening the surface if special finish is to be provided (Excludingrein for cement and structural steel)etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant( Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 12 | Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) |
| 13 | In SSR for items of supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges.Prevalent Royalty charges shall be separately considered while preparing estimate and shall be part of Schedule-B of tender.Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt.i.e Revenue department [As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.67 Dt.15 May,2015. States that the royalty charges of Rs.141.34/Cu.M. ) are considered. |
| 14 | for metal>40mm |
| 15 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by contractor. |
| 16 | Compressive strength of C.C.Cube (Set of 3 cubes) |
| 17 | Mix Design Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender