Tender For Extension Of Career Room Inside 220/132/33 Kv Grid S/S, Optcl At Narendrapur
Tender Value
14.99 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
7 days left
EMD
15000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension Of Career Room Inside 220/132/33 Kv Grid S/S, Optcl At Narendrapur
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all labour for dismantling cement concrete including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 2 | Earthwork in excavation in ordinary soil on foundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge. |
| 3 | Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
| 4 | Cement concrete with (1:3:6) in foundation and floors using 40 mm size black hard crusher broken granite stone metal of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 5 | RCC (1:1.5:3) in following works and usingM20 size black hard crusher broken granite stone chips of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 6 | In F & P |
| 7 | Column and Beam in SS |
| 8 | RCC Slab |
| 9 | RCC Lintel |
| 10 | RCC Chajjah |
| 11 | Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting, bending, binding by using binding wire of18-20 gauze, molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge. |
| 12 | Flyash brick masonry in cement mortar ( 1:6 ) in F&P using of size (23 X11X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 35Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 13 | Flyash brick masonry in cement mortar ( 1:6 ) in Superstructure using of size (23 X11X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 35Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 14 | 12 mm thick cement plaster with cement and sand mortar (1:4 ) finished smooth over outside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 15 | 16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 16 | Cement concrete with (1:1.5:3) in foundation and floors using 20 mm size black hard crusher broken granite stone chips of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 17 | 2.5 cm thick grading concrete (1:2:2) with water proofing compound using 6mm down size black hard crusher broken granite stone chips of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 18 | The water proofing solution is as follows:- (a) Surface preparation :- The entire surface shall be cleaned free from dead mortar, by chipping and grinding and any other mechanical means approved by the engineer in charge. It shall be made free from loose particles, dust and any other laitance that shall impair the adhesion of the waterproofing membrane to the substrate. (b)Coving :- Providing and applying at the junction of slab and vertical offsets with cement mortar 1:4 and admixed with HS Advance Latex at dosage of 5 ltr per 50 Kg cement. Making coving of 75x75 mm size. (c)Crack Treatment:- All the cracks found in the slab shall be cut open into a width of at least 6 mm and depth of 6 mm . The chased open crack shall be cleaned free from dust and shall be filled with a solvent free epoxy resin which is pourable and shall fill the crack for monolithic sealing. (d) Water proofing coating:-Supply and application of a coat of Roof cool and seal or equivalent as a priming coat (50% dilution with water ). After priming coat apply two undiluted coat of Roof kool & Seal or equivalent , glass fibre mesh cloth shall be put between priming coat and 1st coat etc complete including cost,conveyance, taxes of all material & cost,conveyance,taxes of all labour with T&P required etc complete in all respect as per direction of EIC. |
| 19 | Supplying MS Door,Window made out of angle & Square bar of approved design and specification with all cost conveyance taxes etc. complete.As per the direction of the E.I.C. |
| 20 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR 2021, Page No: 224, Item No-10.1) |
| 21 | Painting two coats with synthetic enamel paints over a coat of red oxide primer to iron doors and windos with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 22 | Painting two coats with weather coat (I.S.I) paint on wall surface over a coat of primer of berger make with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge.(Data for10.00 Sqm.)For Ground Floor. |
| 23 | Providing for supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make and of approved quality and shade laid on floors using 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including cost conveyance taxes of all materials and cost conveyance of all labour with T&P etc. complete in all floors in all respects as per direction of Engineer-in-Charge. |
| 24 | Finishing wall surface with cement based wall putty of approved quality and make and finished smooth etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 25 | Wall painting two coats with a plastic emulsion paint of approved shade (BRAND-ASIAN paint 7907 candle wick) over wall surface finished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 26 | Providing,fitting and fixing of UPVC door with 6 mm thick glass / 12mm thick prelaminated board in bottom fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 etc complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 27 | Supplying,fitting and fixing of two tracking UPVC sliding window with 5 mm thick black glass as panel fitted with rubber bidding including all fitting & locking arrangement complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 28 | Supplying,fitting and fixing of Aluminium jally made of alluminium section 9778 as windows frame , section no. 4095 ,4096 and 9777 ,3994 as fixed shutter frame with 50 mm jally/ less as panel fitted with rubber bidding including all fitting & locking arrangement complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 29 | Supplying all labour for dismantling brick work including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 30 | Priming one coat on wall surface with a primer of approved sade etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 31 | Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 32 | Supplying fitting & Fixing of Grid mineral Fibre Ceilling board 600 mm X 600 mm X 16 mm of approved design and quality complete with frame and all fitting and fixtures etc. complete as per the Direction of the E.I.C. |
| 33 | Supplying all labour with t & P required for removal of excess earth by mechanical means up to a distance of 5 KM including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC. |
| 34 | Supply, Installation, testing and commissioning of 120 minutes of metal fire rated doors (Saint Gobain or equivalent) with vision panel 400*900 mm having 11mm thick contra flame door lite as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS277 specification. Door tested 7 approved in CBRI for maximum rating of 2hrs. Produced from 1.6 mm thick galvanized steel sheet formed to double rebate profile of size 105*60mm & 143mm* 57mm (+/- 0.3mm) with a maximum bending radius of 1.4 mm. The door frames may be built into the brick or block walls using corrugated “T” Anchors not welded to the frame (first fix). Frames may also fixed on plastered openings with the help of metallic expansion shield with counter sunk screw (second fix). Door frames are supplied to knock down form with butt joint for bolted assembly at site. Constructed from 1.20mm thick galvanized steel sheet formed to provide a 45mm thick fully flish, double skin door shell with lock seam joints at stile edges. Internal Reinforcements are provided at top, bottom and stile surrounds. The internal construction of the door varies with the degree of Fire Rating as tested. For doors having overall height in the excess of 2300mm the shutters shall essentially have double latching. |
| 35 | Supplying fitting fixing of precoloured Galvanised steel sheet ( JSW 0.5mm) make of approved quality and dimension including hoisting,placing in position,fitting and fixing nuts and bolts etc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 36 | Hoisting joists and trusses and placing in position (labour only) |
| 37 | Supplying all material and labour required for providing centering and shuttering works in F & P etc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 38 | Supplying all material and labour required for providing anti termite treatment to walls and floors etc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 39 | Supplying all labour with T&P required for fitting and fixing of Roller type Venetian blinds of approved quality including cost, conveyance, taxes of all material & cost, conveyance, taxes of all labour with T&P required etc complete in all respect as per direction of EIC. |
| 40 | Supplying afitting fixing of 36 watt 2'x 2' LED lights suitable for false ceing as per approved designthickness including cost, conveyance, taxes and royalities of all materials , cost, conveyance and taxes of all labour with T&P required for the work etc. complete as per the direction of the E.I.C. |
| 41 | Supplying fitting and fixing of following P.H.D.fittings as per the specification,with all cost, conveyance, taxes of all materials, all labour T&P etc. complete |
| 42 | 20 mm PVC pipe |
| 43 | Wash Hand Basin ( parryware ) |
| 44 | Pedetral for basin |
| 45 | exhaust fan |
| 46 | 20 mm GM FW valve |
| 47 | Supplying all labour with T & P required for construction of manhole chamber of dimension ( 0.91 x 0.91 X 0.91) including earth work in all kinds of soil, laying CC(1:3:6) on bed using 25.4 to 50.80mm metal ,benching with CC (1:2:4) using 25.4 to 38.1mm chips ,first class KB brick work in cement mortar (1:4),12.7mm cement plaster on inside surface of man hole and benching, cement flush pointing in (1:3) on the out side of man hole chamber, providing 19.05mm MS or CI step iron, providing RCC roof slab in cc(1:2:4) using 12mm size chips, laying reinforcement as per specification, providing CI manhole cover with two coats of black anti corosive paints, refilling the cavity arround manhole cover with excavated material including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 48 | Supplying all labour with T & P required for laying 4'' dia PVC pipes in required gradient inside the trench over a bed of concrete laid in proportion (1:4:8), jointing the pipes with tarred gasket and cement mortar in proportion (1:1) , encasing the pipe all arround with CC (1:3:6) including lowering the pipe carefully ,placing in position , watering or dewatering if required , testing of sewer line for leakage , back filling after allignment ,removing the surplus earth including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 49 | Electrical Part |
| 50 | Primary point :Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 1.6 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. (Switch Socket:- Legrand/ ABB/ Panasonic) |
| 51 | Supplying & Wiring from first light point to next Light Point (Secondary Point) with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 1.6 mm thick PVC conduit and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including required single rose and Metal box. (Wires:- Poly Cab/ KEi/ Finolex) |
| 52 | Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board. (Switch Socket:- Legrand/ ABB/ Panasonic) |
| 53 | Supplying & fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch etc. as required. (Switch Socket:- Legrand/ ABB/ Panasonic) |
| 54 | Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. (Switch Socket:- Legrand/ ABB/ Panasonic) |
| 55 | Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. (Wires:- Poly Cab/ KEi/ Finolex) |
| 56 | 2X2.5 + 1X1.5 sqmm FRLS Cu wire |
| 57 | 2X4 + 1X1.5 sqmm FRLS Cu wire |
| 58 | Supply, installation, testing & commissioning of 20A industrial socket with 20A MCB fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. (Switch Socket:- Legrand/ ABB/ Panasonic) |
| 59 | Supplying, installation, testing and commissioning of BEE star rated wall mounted fan including earthing etc as required. |
| 60 | 400 mm sweep |
| 61 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (For all Floors LDBs, PDBs, ACDBs & UDBs) |
| 62 | 4 way, Single/Double door(8+12) |
| 63 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 64 | 8 way, Single/ Double door |
| 65 | 12 way, Single/ Double door |
| 66 | Supplying and fixing following rating MCBs/ Isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required. |
| 67 | 63 Amps, FP 10 KA MCB (C-Curve) |
| 68 | 32 Amps, DP 10 KA MCB (C-Curve) |
| 69 | 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) |
| 70 | Supplying and fixing of following RCCB in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years. |
| 71 | 63Amps 4P 415 volts RCCB 100 mA |
| 72 | Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 4C X16sq mm |
| 73 | Laying of One No. PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ MASONERY TRENCH/ HDPE Pipe/ Metal Pipe/ On Wall Surface(Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as required. Upto 35 sqm |
| 74 | Supply & Making end Termination with brass compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)4C X 16 sqmm (28 mm) |
| 75 | Providing,fixing and laying of fallowing dia 50mm dia HDPE pipe (medium class) in ground complete with fitting incl. trenching (75 mm depth) and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender