Power Government Departments Closing in 12 days TDR #58548213

Tender For Improvement To Control Room Building At 132/33 Kv Grid Sub-Station, Mancheswar (Providing Polymer Based Waterproofing,Approach Road To Grid, Vitrified Tile Flooring,Repairing Of Aluminium Doors & Windows, Inside & Outside Repairing & Paint

Issued by Government Departments · Khordha, Odisha
Tender Value
24.66 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
12 days left
EMD
24700
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Improvement To Control Room Building At 132/33 Kv Grid Sub-Station, Mancheswar (Providing Polymer Based Waterproofing,Approach Road To Grid, Vitrified Tile Flooring,Repairing Of Aluminium Doors & Windows, Inside & Outside Repairing & Painting)

BOQ

Name of Work:- Improvement to Control Room Building at 132/33 KV Grid Sub-Station, Mancheswar (Providing Polymer based waterproofing,approach road to grid, vitrified tile flooring,repairing of aluminium doors & windows, inside & outside repairing & painting)
Sl. No. Item Description
1Removing Cement/ lime plaster from walls, ceiling etc. including racking out the joints up to 12mm deep with removing & disposing the debris etc within 50mtr. lead. Including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc complete in all respects as per the direction of the Engineer-in- charge.
2Dismantling Doors/Windows/ Ventilators and removal of bolts, nuts,frames, hinges, fastenings etc including stacking the useful materials for reuse and removing & disposing the debris etc within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.
3Dismantling and Removing Brick/Stone Masonry in cement/lime mortar under /above 3mtr height including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.
4Dismantling and Removing Cement Concrete including stacking the useful materials for reuse and removing & disposing the debris etc. within 50 mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.
5Dismantling and Removing Old Damaged Floor Tile including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.
6Dismantling and Removing Old Tiled Cladding from walls with racking out the joints up to12mm deep etc including stacking the useful materials for reuse and removing & disposing the debris etc. within 50mtr lead including cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respects as per the direction of the Engineer-in- charge.
7Earthwork in excavation in ordinary soil withing 50m initial lead and 1.5m initial lift including rought dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth on foundation trenches including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge.
8Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge.
9Cement concrete with (1:3:6) in foundation and floors using 40 mm size black hard crusher broken granite stone metal of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.
10Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Foundation and Plinth, footings, bases of columns, mass concrete, precast slabs etc using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
11Providing Reinforced Cement Concrete (RCC) work of grade M-20 (1:1 ½ :3) in Column and Beam using 12mm (½ inch) size hard black crusher broker granite stone chips pf approved quality from approved quarry including batching, grading, mixing in a mechanical mixture, hoisting, lowering, laying and compacting concrete with appropriate vibrator for casting- in- situ suitable to the drawing and design of the structural member at site having compressive strength not less than 200 kg/sqcm in 15cm cubes and test conducted after 28 days of curing as per test conducted in accordance with the code IS-456 and IS-516 in work test with watering and curing for 28 days to attain the required strength as mentioned including cost of centering and shuttering but excluding cost of re-enforcing materials like MS rod, tor-steel,binding wire and labour charges for making & tying the re-enforcing grills and including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
12Brick masonry works with cement mortar (1:6) in Super Structure using Fly-Ash bricks of size 25cm X 12cmX 8cm having crushing strength not less than 75 kg/Sqcm with dimensional tolerance + 2% and immersing the bricks for six hours before use in masonry work with splays, cutting, corbelling, chamfering, circular moulding and similar such type of works , watering and curing to attain required strength etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
13Priming two coats with SBR latex/Sikka latex including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge
14Centering, shuttering for Foundation and plinth, base footing, Base of column, mass concrete, precast slabs etc. including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.
15Providing Cement Concrete (1:1 ½ :3) using 20 mm & down size hard black crusher broker granite stone chips of approved quality from approved quarry including mixing, lowering, laying with watering and curing including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
16Supplying,fitting,fixing, and placing uncoated HYSD Bar reinforecement including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge
17Providing, supplying, fitting and fixing of M.S. grill gate, made out of M.S. flat and M.S. angle , M.S. square bar conforming to IS 1977/ 1975 of approved design and drawing (design and drawing to be supplied from the Engineer in charge) including drilling holes in frames etc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.
18Supplying of MS items made out of structural steel pipes, flats,tubular sections,solid square steel members,plates including drilling holes,approved section & design,electricity welded properly with all necessary locking arrangement and 1 coat red oxide primer including cost of all materials, labourT&P,carriage of materials to site etc. complete in all respects as per direction of Engineer in charge(including provision or designed and ornamental fabrication works with cast iron members managing safety,sustainability and aesthetics)
19Providing Floor Tiling works in floors using Ceramic tile of approve make & quality conforming to IS: 13755 laid to proper slope over 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
20Providing Wall Tiling works in Dado,Skirting,rises of steps and vertical face of wall using Ceramic Tiles of premium grade and standard size of approve make & quality fixed over 12mm thick cement mortar (1:3) and jointed with cement slurry mixed with pigments to match the shade of the tiles,finishing with white cement etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
21Providing Floor Tiling works in floors using Vitrified Tiles of size 600mm X 600mm of approve make & quality conforming to IS: 13755 laid to proper slope over 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
22Providing fitting, laying and fixing of approved quality Vitrified tile of coloured / printed series (Homogeneous) of approved make conforming to IS : 13755 laid on vertical faces of walls,dados skirting and risers of steps using 12mm thick cement and sand mortar in (1:3) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing,watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge.
23Providing Floor Tiling works in floors using industrial Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 300mm X 300mm of approve make & quality laid to proper slope over 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality etc including rubbing and polishing complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
2412 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.
2516mm thick Sand and Cement plaster of proportion (1:6) finished smooth over rough surfaces of brick masonry walls including racking out the joints with watering and curing etc complete including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
2620 mm thick cement plaster with cement and sand mortar (1:6 ) to roof ceiling finished smooth on masonary work with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge.
27Providing polymer based terrace water proofing treatment (Berger make/Asian Make & Fosroc make)(a) Surface preparation: The entire surface shall be cleaned free from dead mortar by chipping and grinding and nay other mechanical means approved by the ingineer in charge. it shall be made free from loose particles, dust and any other laitance that shall impair the adhesion othe the waterproofing membrance to the substrate.(b) Coving: Providng and applying at the junction of slab and vertical offsets with ement mortar 1:4 and admixed with HS advace Latex at dosage of 5ltr per 50 kg cement. Making coving of 75x75 mm size(c ) Crack Treatment: All the cracks found in the slab shall be cut open into a width of at least 6mm and depth of 6mm. The chased open crack shall be cleaned free from dust and shall be filled with a solvent free epoxy resin which is pourable and shall fill the crack for monolithic sealing.(d) Waterproofing Coating: Supply and application of a coat of Roof Koll & Seal or equivalent as a priming coat (50% dilution with water). After priming coat apply tow undiluted coat of Roof Koll & seal or equivalent, glass fibre mesh cloth shall be put between priming coat and 1 st Coatetc. complete including cost, conveyance, royalty, taxes of all materials and cost, conveyance of all labour with T&P, equipments and accessories and provision for all arrangements required for the work etc. complete in all respects as per the direction of the Engineer-in- charge.
28Providing fitting fixing up false ceiling made up GI angle and channel section grid of size 2'x2' to4'x4' as per requirement using GI intermediate section 40mmx15mm x.4mm @ 2' c/c both way.GI perimater channel 45mmx30mmx.5mm @ 3'c/c both way GI hanger section 25mmx20mmx.2mm @3' c/c both way & design with 8mm thick calcium silicate board having water proof fire proof of approved quility including cost of all materials, labour , T&P etc. required for the work complete in all respect as per the direction of the EIC.
29Supplying and installation of Ceilling mounted 40 W LED light fittings with all accessories (phillips/CG make).including cost, conveyance, taxes of all material & cost,conveyance,taxes of all labour with T&P required etc complete in all respect as per direction of EIC.
30Supply and installation of 24 W LED (LSDRN-24-CDL/WW) Circular light fittings with all accessories and equipments. (Phillips/CG make)
31Scraping old paint with scrapers, sand papering andwashing with soap water or soda including scaffolding charges upto 5M height to wall surface of approved quality and dimensionincluding cost, conveyance royalities and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in Chage.
32Providing for Finishing surfaces of wall /ceiling with cement/water based wall putty of approved quality and make and finished smooth and even surface to receive painting etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements for scaffolding, staging etc required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
33Providing Primming one coat with primer for plastered works of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
34Wall painting two coats with a plastic emulsion paint of approved shade over wall surface finished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of all labour with T&P required etc complete in all respects as per the direction of Eng.-in-charge.
35Providing for Weather coat two coats of approved quality, make and shade washed and finished smooth over exterior surfaces of wall etc after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
36Providing Primming one coat with primer for iron works of approved quality and make painted and finished after washing and cleaning the same etc complete including cost conveyance taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the Specification and direction of the Engineer-in- charge.
37Painting two coats with synthetic enamel paints to iron / wooden doors and windos with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge
38Providing & fixing of 75 mmx 50mm WPC Frame Decorative including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.
39Supplying fitting fixing of 28 mm WPC Door of approved quality and dimension including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.
40Fixing & hardware fittings for 28 mm WPC Door& 75 mm x 50mm WPC Frame Decorativex including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge.
41Providing powder coated Openable Door Works with Aluminum anodised Section No. 9202 as vertical member 9201 as Top & 9200 as middle & bottom member with frame section No. 9221 and Tappered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 etc complete & top portion of shuttering is to be made with 6mm thick plain glass while filling the bottom portion with 4mm thick acp Board dully positioned with jointing angle, Tappered clips, rubber beading and fitted and fixed with handle, door stopper, locking arrangements with Al. sliding door bolt, tower bolt, door closure etc complete including cost, conveyance taxes of all materials and cost conveyance, of all labour with T&P, equipments and accessories and provision for all arrangements required for the works etc. complete in all respect as per the direction of the Engineer-in- charge.
42Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass in top portion and board in bottom portion of approved quality complete with frame, shutters and all fitting and fixtures including cost, conveyance, taxes of all material & cost,conveyance,taxes of all labour with T&P required etc complete in all respect as per direction of EIC.
43Providing,fitting and fixing up window (sliding type) made up aluminum section 9778 as window frame, section on 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P excluding cost of glass etc complete as per direction of Engineer in charge(powder coated)
44Supplying fitting fixing of Roller blinds by fixing poder coated top channel,bottom channel with bottom end cap,control unit and good quality of 0.60mm thick fabric of approved design and quality complete including cost, conveyance, taxes of all material & cost,conveyance,taxes of all labour with T&P required etc complete in all respect as per direction of EIC.
45Supplying all labour for dismantling,refitting&refixing of Aluminium door including including cost of all fittings excluding cost of aluminum & glass including cost of all labour with T & P required etc complete as per direction of Engineer in charge
46Supplying all labour for dismantling,refitting&refixing of Aluminium sliding window including cost of all fittings excluding cost of aluminum & glass including cost of all labour with T & P required etc complete as per direction of Engineer in charge
47Supplying fitting, fixing of Aluminium door fittings with cost, conveyance and taxes of all materials and cost, conveyance and taxes of all labour and T&P required for the work etc. complete as per the direction of the E.I.C.
48Door stopper
49Sliding door bolt (Aldrop) (I.S.I.) 250mm x 16mm
50Aluminium tower bolt(150mmx10mm) I.S.I
51Supplying fitting, fixing of hydraulic door closer(heavy duty) with cost, conveyance and taxes of all materials and cost, conveyance and taxes of all labour and T&P required for the work etc. complete as per the direction of the E.I.C.
52Supplying, fitting and fixing of 5 mm thick plain glass for Aluminium doors & windows including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge.
53Providing for plumbing & Laying of PVC (SWR) Pipes and Specials in House plumbing for Rain water disposal/ Vent Pipe of the following diameter for all classes with fittings and specials to walls jointed with approved quality solvent cement by non-heat application method and with nails bobbins and wooden plugs etc as per specification with including cost conveyance royalty taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
544” (100mm) dia PVC pipe (SWR)
552” (50mm) dia PVC pipe
56Providing and Supplying for Plumbing & laying Un-plastisized PVC (UPVC) pipe (Confirming to IS-4985 of Class-IV-10 Kg per Sq.Cm) of approved make and quality for internal water supply in house plumbing with the following nominal dia with fittings, clamps etc firmly fixed to walls ,floors and ceiling etc with making good to the damages happened to surfaces etc including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
571 1/2\\" (40mm) dia UPVC Pipe
581\\" (25mm) dia UPVC Pipe
593/4\\" (20mm) dia UPVC Pipe
60Providing and fixing to wall, ceiling and floor CPVC pipes including groove cutting (concealed wiring), and pipe fittings of the following dia with clamps including making good the wall, ceiling and floor all complete as per specification etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge.
613/4\\" (20mm) dia CPVC Pipe
62Supplying all materials, Labour & T&P for cutting holes through existing brick/ laterite masonry wall of 250 to 500 mm thick for taking C.I./PVC/AC pipes and fittings including mending good to the damages with brick, CC ( 1:2:4) & finishing the same with Cement Plaster (1:3) etc. complete including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per P.H. specification and direction of the Engineer-in- charge.
63Providing and Supplying for Fitting and Fixing of Toilet Accessories and Appliances in sanitary use of the following type of Approved make and quality as mentioned provided in proper position dully connected to water supply and sanitary system firmly fixed to walls ,floors and ceiling etc using clamps, brackets, nails, screws, bobins etc as required for plumbing the fittings and specials etc and making good to the damages happened to surfaces including cost conveyance, royalty, taxes of all materials and cost conveyance of all labour with T&P, equipments and accessories and provision for all arrangement required for the works etc. complete in all respect as per the PH Specification and direction of the Engineer-in- charge.
64Porcelain EWC with S-trap(Parryware)
65EWC PVC standard seat cover(Parryware)
6610 litr pvc low level cistern with fittings (Parryware)
6732mm PVC long flush bend
6815mm dia CP 2 in 1 Bib Cock(parryware)
69CP health faucet(parryware)
7015mm dia CP Long Body Bib Cock
7115mm dia CP Angular Stop Cock
7215mm dia CP Pillar Cock
73CP waste (32mm)
74CP revolvolving shower with arm (overhead)
75CP soap holder/disc
76CP towel rail (600x20)mm
77CP towel ring
78CP grating
79C.P. extension piece-2\\"
80CP flange
8132mmx1150 mm long PVC waste pipe
8215mmx450mm PVC connection pipe
83Bevelled Edge Mirrior
84Acrylic glass
85Porcelain 22\\"x16\\" Wash Hand Basin(Parryware)
86Porcelain Standard Pedestal for WHB
87110mm dia P.V.C. Nahani Trap with out Jally
88110 mm dia P.V.C. SWR plain bend 87.5'
89110mm diaP.V.C. SWR door bend 87.5'
90110mm dia P.V.C. SWR S/J with door
91110 mm dia PVC SWR vent cowl
92110 mm dia PVC SWR pipe clip
9325 mm dia UPVC BALL VALVE
9425 mm Ball Cock with Rod & Ball
9520mm dia CP Concealed Stop Cock
96Supplying all materials labour & T & P for cleaning of Septic Tank by mechanical means using Suction machine mounted on TATA 710 LPT BS6 vehicle with tank capacity 4000 ltr ( Suction) .The suction machine using to sock over flow of sewer water & sludge from the machine hole for facilitating clearing the blockagein in the sewer line and subsequently disposal of the sucking sewerage water with in 20 KM radious from work site with unloading at designated place by Municipality authorities etc complete in all respect as per site condition & direction of the Engineer in charge.. etc complete in all respect as per site condition & direction of the Engineer in charge.The cost towards hire charges machine,operators, POL, Consumable materials, conveyance & labour charges etc. (As Per Practical field Observations)
97Supplying all labour T&P required for cleaning of M.H chamber as per P.H specification , labours for intial cleaning , dewatering and removing the night soil and debries including cost, conveyance and taxes of all of all labour and T&P required for the work etc. complete as per the diredtion of the E.I.C
98Supplying all labour with t & P required for removal of debris by mechanical means up to a distance of 5 KM including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58548213
AUTHORITY Government Departments
TENDER VALUE 24.66 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Orissa Power Transmission Corporation Limited
Work Description Tender for Improvement To Control Room Building At 132/33 Kv Grid Sub-Station, Mancheswar (Providing Polymer Based Waterproofing,Approach Road To Grid, Vitrified Tile Flooring,Repairing Of Aluminium Doors & Windows, Inside & Outside Repairing & Painting)
Basic Detail
Tender No ETCN 07 of 26-27
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 16 Nov 2026
Submission Date 30 Nov 2026
Open Date 04 Dec 2026
Finance
Tender Value 24.66 Lakhs
Tender Fee 6000
EMD 24700
Exemption Available
Document List
010c6e74-b328-46c0-9890-02d328412257.html
BOQ_620736.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf
Tendernotice_5.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

010c6e74-b328-46c0-9890-02d328412257.html

xls

BOQ_620736.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

pdf

Tendernotice_5.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender